Export limit exceeded: 430208 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 430208 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 430208 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 56021 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (56021 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-34971 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 7.8 High |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2026-34987 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 9.9 Critical |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2026-34988 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 6.3 Medium |
| Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2024-32669 | 1 Samsung Open Source | 1 Escargot | 2026-04-15 | 5.3 Medium |
| Improper Input Validation vulnerability in Samsung Open Source escargot JavaScript engine allows Overflow Buffers. However, it occurs in the test code and does not include in the release. This issue affects escargot: 4.0.0. | ||||
| CVE-2024-0114 | 2026-04-15 | 8.1 High | ||
| NVIDIA Hopper HGX for 8-GPU contains a vulnerability in the HGX Management Controller (HMC) that may allow a malicious actor with administrative access on the BMC to access the HMC as an administrator. A successful exploit of this vulnerability may lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. | ||||
| CVE-2025-55164 | 1 Content-security-policy-parser Project | 1 Content-security-policy-parser | 2026-04-15 | N/A |
| content-security-policy-parser parses content security policy directives. A prototype pollution vulnerability exists in versions 0.5.0 and earlier, wherein if a policy name is called __proto__, one can override the Object prototype. This issue has been patched in version 0.6.0. A workaround involves disabling prototype method in NodeJS, neutralizing all possible prototype pollution attacks. Provide either --disable-proto=delete (recommended) or --disable-proto=throw as an argument to node to enable this feature. | ||||
| CVE-2024-32986 | 2026-04-15 | 9.7 Critical | ||
| PWAsForFirefox is a tool to install, manage and use Progressive Web Apps (PWAs) in Mozilla Firefox. Due to improper sanitization of web app properties (such as name, description, shortcuts), web apps were able to inject additional lines into XDG Desktop Entries (on Linux) and `AppInfo.ini` (on PortableApps.com). This allowed malicious web apps to introduce keys like `Exec`, which could run arbitrary code when the affected web app was launched. This vulnerability affects all Linux and PortableApps.com users of all PWAsForFirefox versions up to (excluding) 2.12.0. Windows and macOS users are not affected. This vulnerability has been fixed in commit `9932d4b` which has been included in release in v2.12.0. The main fix is implemented in the native part, but the extension also contains additional fixes. All Linux and PortableApps.com users are advised to update to this version as soon as possible. It is also recommended for Windows and macOS users to update to this version, as it contains additional fixes related to properties sanitization. There are no known workarounds for this vulnerability. | ||||
| CVE-2025-2398 | 2026-04-15 | 7.2 High | ||
| A vulnerability was found in China Mobile P22g-CIac, ZXWT-MIG-P4G4V, ZXWT-MIG-P8G8V, GT3200-4G4P and GT3200-8G8P up to 20250305. It has been rated as critical. This issue affects some unknown processing of the component CLI su Command Handler. The manipulation leads to use of default credentials. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2024-37861 | 1 Open Robotics | 2 Nav2 Humble, Ros2 | 2026-04-15 | 9.8 Critical |
| Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble versions were discovered to contain a buffer overflow via the nav2_amcl process. This vulnerability is triggered via sending a crafted .yaml file. | ||||
| CVE-2024-0099 | 2026-04-15 | 7.8 High | ||
| NVIDIA vGPU software for Linux contains a vulnerability in the Virtual GPU Manager, where the guest OS could cause buffer overrun in the host. A successful exploit of this vulnerability might lead to information disclosure, data tampering, escalation of privileges, and denial of service. | ||||
| CVE-2024-32879 | 2 Python-social-auth, Redhat | 2 Social-app-django, Ansible Automation Platform | 2026-04-15 | 4.9 Medium |
| Python Social Auth is a social authentication/registration mechanism. Prior to version 5.4.1, due to default case-insensitive collation in MySQL or MariaDB databases, third-party authentication user IDs are not case-sensitive and could cause different IDs to match. This issue has been addressed by a fix released in version 5.4.1. An immediate workaround would be to change collation of the affected field. | ||||
| CVE-2025-59103 | 1 Dormakaba | 1 Access Manager | 2026-04-15 | N/A |
| The Access Manager 92xx in hardware revision K7 is based on Linux instead of Windows CE embedded in older hardware revisions. In this new hardware revision it was noticed that an SSH service is exposed on port 22. By analyzing the firmware of the devices, it was noticed that there are two users with hardcoded and weak passwords that can be used to access the devices via SSH. The passwords can be also guessed very easily. The password of at least one user is set to a random value after the first deployment, with the restriction that the password is only randomized if the configured date is prior to 2022. Therefore, under certain circumstances, the passwords are not randomized. For example, if the clock is never set on the device, the battery of the clock module has been changed, the Access Manager has been factory reset and has not received a time yet. | ||||
| CVE-2025-52884 | 1 Risc Zero Project | 1 Risc Zero | 2026-04-15 | N/A |
| RISC Zero is a zero-knowledge verifiable general computing platform, with Ethereum integration. The risc0-ethereum repository contains Solidity verifier contracts, Steel EVM view call library, and supporting code. Prior to versions 2.1.1 and 2.2.0, the `Steel.validateCommitment` Solidity library function will return `true` for a crafted commitment with a digest value of zero. This violates the semantics of `validateCommitment`, as this does not commitment to a block that is in the current chain. Because the digest is zero, it does not correspond to any block and there exist no known openings. As a result, this commitment will never be produced by a correct zkVM guest using Steel and leveraging this bug to compromise the soundness of a program using Steel would require a separate bug or misuse of the Steel library, which is expected to be used to validate the root of state opening proofs. A fix has been released as part of `risc0-ethereum` 2.1.1 and 2.2.0. Users for the `Steel` Solidity library versions 2.1.0 or earlier should ensure they are using `Steel.validateCommitment` in tandem with zkVM proof verification of a Steel program, as shown in the ERC-20 counter example, and documentation. This is the correct usage of Steel, and users following this pattern are not at risk, and do not need to take action. Users not verifying a zkVM proof of a Steel program should update their application to do so, as this is incorrect usage of Steel. | ||||
| CVE-2024-3911 | 2026-04-15 | 6.5 Medium | ||
| An unauthenticated remote attacker can deceive users into performing unintended actions due to improper restriction of rendered UI layers or frames. | ||||
| CVE-2024-32655 | 1 Npgsql | 1 Npgsql | 2026-04-15 | 8.1 High |
| Npgsql is the .NET data provider for PostgreSQL. The `WriteBind()` method in `src/Npgsql/Internal/NpgsqlConnector.FrontendMessages.cs` uses `int` variables to store the message length and the sum of parameter lengths. Both variables overflow when the sum of parameter lengths becomes too large. This causes Npgsql to write a message size that is too small when constructing a Postgres protocol message to send it over the network to the database. When parsing the message, the database will only read a small number of bytes and treat any following bytes as new messages while they belong to the old message. Attackers can abuse this to inject arbitrary Postgres protocol messages into the connection, leading to the execution of arbitrary SQL statements on the application's behalf. This vulnerability is fixed in 4.0.14, 4.1.13, 5.0.18, 6.0.11, 7.0.7, and 8.0.3. | ||||
| CVE-2025-25178 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to cause kernel system memory corruption. | ||||
| CVE-2024-12013 | 2026-04-15 | 7.6 High | ||
| A CWE-1392 “Use of Default Credentials” was discovered affecting the 130.8005 TCP/IP Gateway running firmware version 12h. The device exposes an FTP server with default and easy-to-guess admin credentials. A remote attacker capable of interacting with the FTP server could gain access and perform changes over resources exposed by the service such as configuration files where password hashes are saved or where network settings are stored. | ||||
| CVE-2025-24310 | 2026-04-15 | N/A | ||
| Improper restriction of rendered UI layers or frames issue exists in HMI ViewJet C-more series, which may allow a remote unauthenticated attacker to trick the product user to perform operations on the product's web pages. | ||||
| CVE-2025-57353 | 1 Nodejs | 2 Messageformat, Nodejs | 2026-04-15 | 5.3 Medium |
| The Runtime components of messageformat package for Node.js before 3.0.2 contain a prototype pollution vulnerability. Due to insufficient validation of nested message keys during the processing of message data, an attacker can manipulate the prototype chain of JavaScript objects by providing specially crafted input. This can result in the injection of arbitrary properties into the Object.prototype, potentially leading to denial of service conditions or unexpected application behavior. The vulnerability allows attackers to alter the prototype of base objects, impacting all subsequent object instances throughout the application's lifecycle. | ||||
| CVE-2025-29991 | 2026-04-15 | 2.2 Low | ||
| Yubico YubiKey 5.4.1 through 5.7.3 before 5.7.4 has an incorrect FIDO CTAP PIN/UV Auth Protocol Two implementation. It uses the signature length from CTAP PIN/UV Auth Protocol One, even when CTAP PIN/UV Auth Protocol Two was chosen, resulting in a partial signature verification. | ||||