Export limit exceeded: 26155 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26155 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54158 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't free qgroup space unless specified Boris noticed in his simple quotas testing that he was getting a leak with Sweet Tea's change to subvol create that stopped doing a transaction commit. This was just a side effect of that change. In the delayed inode code we have an optimization that will free extra reservations if we think we can pack a dir item into an already modified leaf. Previously this wouldn't be triggered in the subvolume create case because we'd commit the transaction, it was still possible but much harder to trigger. It could actually be triggered if we did a mkdir && subvol create with qgroups enabled. This occurs because in btrfs_insert_delayed_dir_index(), which gets called when we're adding the dir item, we do the following: btrfs_block_rsv_release(fs_info, trans->block_rsv, bytes, NULL); if we're able to skip reserving space. The problem here is that trans->block_rsv points at the temporary block rsv for the subvolume create, which has qgroup reservations in the block rsv. This is a problem because btrfs_block_rsv_release() will do the following: if (block_rsv->qgroup_rsv_reserved >= block_rsv->qgroup_rsv_size) { qgroup_to_release = block_rsv->qgroup_rsv_reserved - block_rsv->qgroup_rsv_size; block_rsv->qgroup_rsv_reserved = block_rsv->qgroup_rsv_size; } The temporary block rsv just has ->qgroup_rsv_reserved set, ->qgroup_rsv_size == 0. The optimization in btrfs_insert_delayed_dir_index() sets ->qgroup_rsv_reserved = 0. Then later on when we call btrfs_subvolume_release_metadata() which has btrfs_block_rsv_release(fs_info, rsv, (u64)-1, &qgroup_to_release); btrfs_qgroup_convert_reserved_meta(root, qgroup_to_release); qgroup_to_release is set to 0, and we do not convert the reserved metadata space. The problem here is that the block rsv code has been unconditionally messing with ->qgroup_rsv_reserved, because the main place this is used is delalloc, and any time we call btrfs_block_rsv_release() we do it with qgroup_to_release set, and thus do the proper accounting. The subvolume code is the only other code that uses the qgroup reservation stuff, but it's intermingled with the above optimization, and thus was getting its reservation freed out from underneath it and thus leaking the reserved space. The solution is to simply not mess with the qgroup reservations if we don't have qgroup_to_release set. This works with the existing code as anything that messes with the delalloc reservations always have qgroup_to_release set. This fixes the leak that Boris was observing. | ||||
| CVE-2025-68292 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/memfd: fix information leak in hugetlb folios When allocating hugetlb folios for memfd, three initialization steps are missing: 1. Folios are not zeroed, leading to kernel memory disclosure to userspace 2. Folios are not marked uptodate before adding to page cache 3. hugetlb_fault_mutex is not taken before hugetlb_add_to_page_cache() The memfd allocation path bypasses the normal page fault handler (hugetlb_no_page) which would handle all of these initialization steps. This is problematic especially for udmabuf use cases where folios are pinned and directly accessed by userspace via DMA. Fix by matching the initialization pattern used in hugetlb_no_page(): - Zero the folio using folio_zero_user() which is optimized for huge pages - Mark it uptodate with folio_mark_uptodate() - Take hugetlb_fault_mutex before adding to page cache to prevent races The folio_zero_user() change also fixes a potential security issue where uninitialized kernel memory could be disclosed to userspace through read() or mmap() operations on the memfd. | ||||
| CVE-2023-54155 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: core: remove unnecessary frame_sz check in bpf_xdp_adjust_tail() Syzkaller reported the following issue: ======================================= Too BIG xdp->frame_sz = 131072 WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 ____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline] WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103 ... Call Trace: <TASK> bpf_prog_4add87e5301a4105+0x1a/0x1c __bpf_prog_run include/linux/filter.h:600 [inline] bpf_prog_run_xdp include/linux/filter.h:775 [inline] bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721 netif_receive_generic_xdp net/core/dev.c:4807 [inline] do_xdp_generic+0x35c/0x770 net/core/dev.c:4866 tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919 tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043 call_write_iter include/linux/fs.h:1871 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x650/0xe40 fs/read_write.c:584 ksys_write+0x12f/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe87 ("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the xdp_init_buff() which all XDP driver use - it's safe to remove this check. The original intend was to catch cases where XDP drivers have not been updated to use xdp.frame_sz, but that is not longer a concern (since xdp_init_buff). Running the initial syzkaller repro it was discovered that the contiguous physical memory allocation is used for both xdp paths in tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can work on higher order pages, as long as this is contiguous physical memory (e.g. a page). | ||||
| CVE-2025-68751 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/fpu: Fix false-positive kmsan report in fpu_vstl() A false-positive kmsan report is detected when running ping command. An inline assembly instruction 'vstl' can write varied amount of bytes depending on value of 'index' argument. If 'index' > 0, 'vstl' writes at least 2 bytes. clang generates kmsan write helper call depending on inline assembly constraints. Constraints are evaluated compile-time, but value of 'index' argument is known only at runtime. clang currently generates call to __msan_instrument_asm_store with 1 byte as size. Manually call kmsan function to indicate correct amount of bytes written and fix false-positive report. This change fixes following kmsan reports: [ 36.563119] ===================================================== [ 36.563594] BUG: KMSAN: uninit-value in virtqueue_add+0x35c6/0x7c70 [ 36.563852] virtqueue_add+0x35c6/0x7c70 [ 36.564016] virtqueue_add_outbuf+0xa0/0xb0 [ 36.564266] start_xmit+0x288c/0x4a20 [ 36.564460] dev_hard_start_xmit+0x302/0x900 [ 36.564649] sch_direct_xmit+0x340/0xea0 [ 36.564894] __dev_queue_xmit+0x2e94/0x59b0 [ 36.565058] neigh_resolve_output+0x936/0xb40 [ 36.565278] __neigh_update+0x2f66/0x3a60 [ 36.565499] neigh_update+0x52/0x60 [ 36.565683] arp_process+0x1588/0x2de0 [ 36.565916] NF_HOOK+0x1da/0x240 [ 36.566087] arp_rcv+0x3e4/0x6e0 [ 36.566306] __netif_receive_skb_list_core+0x1374/0x15a0 [ 36.566527] netif_receive_skb_list_internal+0x1116/0x17d0 [ 36.566710] napi_complete_done+0x376/0x740 [ 36.566918] virtnet_poll+0x1bae/0x2910 [ 36.567130] __napi_poll+0xf4/0x830 [ 36.567294] net_rx_action+0x97c/0x1ed0 [ 36.567556] handle_softirqs+0x306/0xe10 [ 36.567731] irq_exit_rcu+0x14c/0x2e0 [ 36.567910] do_io_irq+0xd4/0x120 [ 36.568139] io_int_handler+0xc2/0xe8 [ 36.568299] arch_cpu_idle+0xb0/0xc0 [ 36.568540] arch_cpu_idle+0x76/0xc0 [ 36.568726] default_idle_call+0x40/0x70 [ 36.568953] do_idle+0x1d6/0x390 [ 36.569486] cpu_startup_entry+0x9a/0xb0 [ 36.569745] rest_init+0x1ea/0x290 [ 36.570029] start_kernel+0x95e/0xb90 [ 36.570348] startup_continue+0x2e/0x40 [ 36.570703] [ 36.570798] Uninit was created at: [ 36.571002] kmem_cache_alloc_node_noprof+0x9e8/0x10e0 [ 36.571261] kmalloc_reserve+0x12a/0x470 [ 36.571553] __alloc_skb+0x310/0x860 [ 36.571844] __ip_append_data+0x483e/0x6a30 [ 36.572170] ip_append_data+0x11c/0x1e0 [ 36.572477] raw_sendmsg+0x1c8c/0x2180 [ 36.572818] inet_sendmsg+0xe6/0x190 [ 36.573142] __sys_sendto+0x55e/0x8e0 [ 36.573392] __s390x_sys_socketcall+0x19ae/0x2ba0 [ 36.573571] __do_syscall+0x12e/0x240 [ 36.573823] system_call+0x6e/0x90 [ 36.573976] [ 36.574017] Byte 35 of 98 is uninitialized [ 36.574082] Memory access of size 98 starts at 0000000007aa0012 [ 36.574218] [ 36.574325] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G B N 6.17.0-dirty #16 NONE [ 36.574541] Tainted: [B]=BAD_PAGE, [N]=TEST [ 36.574617] Hardware name: IBM 3931 A01 703 (KVM/Linux) [ 36.574755] ===================================================== [ 63.532541] ===================================================== [ 63.533639] BUG: KMSAN: uninit-value in virtqueue_add+0x35c6/0x7c70 [ 63.533989] virtqueue_add+0x35c6/0x7c70 [ 63.534940] virtqueue_add_outbuf+0xa0/0xb0 [ 63.535861] start_xmit+0x288c/0x4a20 [ 63.536708] dev_hard_start_xmit+0x302/0x900 [ 63.537020] sch_direct_xmit+0x340/0xea0 [ 63.537997] __dev_queue_xmit+0x2e94/0x59b0 [ 63.538819] neigh_resolve_output+0x936/0xb40 [ 63.539793] ip_finish_output2+0x1ee2/0x2200 [ 63.540784] __ip_finish_output+0x272/0x7a0 [ 63.541765] ip_finish_output+0x4e/0x5e0 [ 63.542791] ip_output+0x166/0x410 [ 63.543771] ip_push_pending_frames+0x1a2/0x470 [ 63.544753] raw_sendmsg+0x1f06/0x2180 [ 63.545033] inet_sendmsg+0xe6/0x190 [ 63.546006] __sys_sendto+0x55e/0x8e0 ---truncated--- | ||||
| CVE-2025-68262 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: zstd - fix double-free in per-CPU stream cleanup The crypto/zstd module has a double-free bug that occurs when multiple tfms are allocated and freed. The issue happens because zstd_streams (per-CPU contexts) are freed in zstd_exit() during every tfm destruction, rather than being managed at the module level. When multiple tfms exist, each tfm exit attempts to free the same shared per-CPU streams, resulting in a double-free. This leads to a stack trace similar to: BUG: Bad page state in process kworker/u16:1 pfn:106fd93 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x106fd93 flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: nonzero entire_mapcount Modules linked in: ... CPU: 3 UID: 0 PID: 2506 Comm: kworker/u16:1 Kdump: loaded Tainted: G B Hardware name: ... Workqueue: btrfs-delalloc btrfs_work_helper Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 bad_page+0x71/0xd0 free_unref_page_prepare+0x24e/0x490 free_unref_page+0x60/0x170 crypto_acomp_free_streams+0x5d/0xc0 crypto_acomp_exit_tfm+0x23/0x50 crypto_destroy_tfm+0x60/0xc0 ... Change the lifecycle management of zstd_streams to free the streams only once during module cleanup. | ||||
| CVE-2025-68259 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Don't skip unrelated instruction if INT3/INTO is replaced When re-injecting a soft interrupt from an INT3, INT0, or (select) INTn instruction, discard the exception and retry the instruction if the code stream is changed (e.g. by a different vCPU) between when the CPU executes the instruction and when KVM decodes the instruction to get the next RIP. As effectively predicted by commit 6ef88d6e36c2 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction"), failure to verify that the correct INTn instruction was decoded can effectively clobber guest state due to decoding the wrong instruction and thus specifying the wrong next RIP. The bug most often manifests as "Oops: int3" panics on static branch checks in Linux guests. Enabling or disabling a static branch in Linux uses the kernel's "text poke" code patching mechanism. To modify code while other CPUs may be executing that code, Linux (temporarily) replaces the first byte of the original instruction with an int3 (opcode 0xcc), then patches in the new code stream except for the first byte, and finally replaces the int3 with the first byte of the new code stream. If a CPU hits the int3, i.e. executes the code while it's being modified, then the guest kernel must look up the RIP to determine how to handle the #BP, e.g. by emulating the new instruction. If the RIP is incorrect, then this lookup fails and the guest kernel panics. The bug reproduces almost instantly by hacking the guest kernel to repeatedly check a static branch[1] while running a drgn script[2] on the host to constantly swap out the memory containing the guest's TSS. [1]: https://gist.github.com/osandov/44d17c51c28c0ac998ea0334edf90b5a [2]: https://gist.github.com/osandov/10e45e45afa29b11e0c7209247afc00b | ||||
| CVE-2025-68258 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: multiq3: sanitize config options in multiq3_attach() Syzbot identified an issue [1] in multiq3_attach() that induces a task timeout due to open() or COMEDI_DEVCONFIG ioctl operations, specifically, in the case of multiq3 driver. This problem arose when syzkaller managed to craft weird configuration options used to specify the number of channels in encoder subdevice. If a particularly great number is passed to s->n_chan in multiq3_attach() via it->options[2], then multiple calls to multiq3_encoder_reset() at the end of driver-specific attach() method will be running for minutes, thus blocking tasks and affected devices as well. While this issue is most likely not too dangerous for real-life devices, it still makes sense to sanitize configuration inputs. Enable a sensible limit on the number of encoder chips (4 chips max, each with 2 channels) to stop this behaviour from manifesting. [1] Syzbot crash: INFO: task syz.2.19:6067 blocked for more than 143 seconds. ... Call Trace: <TASK> context_switch kernel/sched/core.c:5254 [inline] __schedule+0x17c4/0x4d60 kernel/sched/core.c:6862 __schedule_loop kernel/sched/core.c:6944 [inline] schedule+0x165/0x360 kernel/sched/core.c:6959 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7016 __mutex_lock_common kernel/locking/mutex.c:676 [inline] __mutex_lock+0x7e6/0x1350 kernel/locking/mutex.c:760 comedi_open+0xc0/0x590 drivers/comedi/comedi_fops.c:2868 chrdev_open+0x4cc/0x5e0 fs/char_dev.c:414 do_dentry_open+0x953/0x13f0 fs/open.c:965 vfs_open+0x3b/0x340 fs/open.c:1097 ... | ||||
| CVE-2023-54154 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix target_cmd_counter leak The target_cmd_counter struct allocated via target_alloc_cmd_counter() is never freed, resulting in leaks across various transport types, e.g.: unreferenced object 0xffff88801f920120 (size 96): comm "sh", pid 102, jiffies 4294892535 (age 713.412s) hex dump (first 32 bytes): 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 38 01 92 1f 80 88 ff ff ........8....... backtrace: [<00000000e58a6252>] kmalloc_trace+0x11/0x20 [<0000000043af4b2f>] target_alloc_cmd_counter+0x17/0x90 [target_core_mod] [<000000007da2dfa7>] target_setup_session+0x2d/0x140 [target_core_mod] [<0000000068feef86>] tcm_loop_tpg_nexus_store+0x19b/0x350 [tcm_loop] [<000000006a80e021>] configfs_write_iter+0xb1/0x120 [<00000000e9f4d860>] vfs_write+0x2e4/0x3c0 [<000000008143433b>] ksys_write+0x80/0xb0 [<00000000a7df29b2>] do_syscall_64+0x42/0x90 [<0000000053f45fb8>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Free the structure alongside the corresponding iscsit_conn / se_sess parent. | ||||
| CVE-2023-54152 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: j1939: prevent deadlock by moving j1939_sk_errqueue() This commit addresses a deadlock situation that can occur in certain scenarios, such as when running data TP/ETP transfer and subscribing to the error queue while receiving a net down event. The deadlock involves locks in the following order: 3 j1939_session_list_lock -> active_session_list_lock j1939_session_activate ... j1939_sk_queue_activate_next -> sk_session_queue_lock ... j1939_xtp_rx_eoma_one 2 j1939_sk_queue_drop_all -> sk_session_queue_lock ... j1939_sk_netdev_event_netdown -> j1939_socks_lock j1939_netdev_notify 1 j1939_sk_errqueue -> j1939_socks_lock __j1939_session_cancel -> active_session_list_lock j1939_tp_rxtimer CPU0 CPU1 ---- ---- lock(&priv->active_session_list_lock); lock(&jsk->sk_session_queue_lock); lock(&priv->active_session_list_lock); lock(&priv->j1939_socks_lock); The solution implemented in this commit is to move the j1939_sk_errqueue() call out of the active_session_list_lock context, thus preventing the deadlock situation. | ||||
| CVE-2025-68257 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: check device's attached status in compat ioctls Syzbot identified an issue [1] that crashes kernel, seemingly due to unexistent callback dev->get_valid_routes(). By all means, this should not occur as said callback must always be set to get_zero_valid_routes() in __comedi_device_postconfig(). As the crash seems to appear exclusively in i386 kernels, at least, judging from [1] reports, the blame lies with compat versions of standard IOCTL handlers. Several of them are modified and do not use comedi_unlocked_ioctl(). While functionality of these ioctls essentially copy their original versions, they do not have required sanity check for device's attached status. This, in turn, leads to a possibility of calling select IOCTLs on a device that has not been properly setup, even via COMEDI_DEVCONFIG. Doing so on unconfigured devices means that several crucial steps are missed, for instance, specifying dev->get_valid_routes() callback. Fix this somewhat crudely by ensuring device's attached status before performing any ioctls, improving logic consistency between modern and compat functions. [1] Syzbot report: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... CR2: ffffffffffffffd6 CR3: 000000006c717000 CR4: 0000000000352ef0 Call Trace: <TASK> get_valid_routes drivers/comedi/comedi_fops.c:1322 [inline] parse_insn+0x78c/0x1970 drivers/comedi/comedi_fops.c:1401 do_insnlist_ioctl+0x272/0x700 drivers/comedi/comedi_fops.c:1594 compat_insnlist drivers/comedi/comedi_fops.c:3208 [inline] comedi_compat_ioctl+0x810/0x990 drivers/comedi/comedi_fops.c:3273 __do_compat_sys_ioctl fs/ioctl.c:695 [inline] __se_compat_sys_ioctl fs/ioctl.c:638 [inline] __ia32_compat_sys_ioctl+0x242/0x370 fs/ioctl.c:638 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] ... | ||||
| CVE-2025-68252 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup In fastrpc_map_lookup, dma_buf_get is called to obtain a reference to the dma_buf for comparison purposes. However, this reference is never released when the function returns, leading to a dma_buf memory leak. Fix this by adding dma_buf_put before returning from the function, ensuring that the temporarily acquired reference is properly released regardless of whether a matching map is found. Rule: add | ||||
| CVE-2025-68249 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: most: usb: hdm_probe: Fix calling put_device() before device initialization The early error path in hdm_probe() can jump to err_free_mdev before &mdev->dev has been initialized with device_initialize(). Calling put_device(&mdev->dev) there triggers a device core WARN and ends up invoking kref_put(&kobj->kref, kobject_release) on an uninitialized kobject. In this path the private struct was only kmalloc'ed and the intended release is effectively kfree(mdev) anyway, so free it directly instead of calling put_device() on an uninitialized device. This removes the WARNING and fixes the pre-initialization error path. | ||||
| CVE-2025-68248 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vmw_balloon: indicate success when effectively deflating during migration When migrating a balloon page, we first deflate the old page to then inflate the new page. However, if inflating the new page succeeded, we effectively deflated the old page, reducing the balloon size. In that case, the migration actually worked: similar to migrating+ immediately deflating the new page. The old page will be freed back to the buddy. Right now, the core will leave the page be marked as isolated (as we returned an error). When later trying to putback that page, we will run into the WARN_ON_ONCE() in balloon_page_putback(). That handling was changed in commit 3544c4faccb8 ("mm/balloon_compaction: stop using __ClearPageMovable()"); before that change, we would have tolerated that way of handling it. To fix it, let's just return 0 in that case, making the core effectively just clear the "isolated" flag + freeing it back to the buddy as if the migration succeeded. Note that the new page will also get freed when the core puts the last reference. Note that this also makes it all be more consistent: we will no longer unisolate the page in the balloon driver while keeping it marked as being isolated in migration core. This was found by code inspection. | ||||
| CVE-2023-54148 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Move representor neigh cleanup to profile cleanup_tx For IP tunnel encapsulation in ECMP (Equal-Cost Multipath) mode, as the flow is duplicated to the peer eswitch, the related neighbour information on the peer uplink representor is created as well. In the cited commit, eswitch devcom unpair is moved to uplink unload API, specifically the profile->cleanup_tx. If there is a encap rule offloaded in ECMP mode, when one eswitch does unpair (because of unloading the driver, for instance), and the peer rule from the peer eswitch is going to be deleted, the use-after-free error is triggered while accessing neigh info, as it is already cleaned up in uplink's profile->disable, which is before its profile->cleanup_tx. To fix this issue, move the neigh cleanup to profile's cleanup_tx callback, and after mlx5e_cleanup_uplink_rep_tx is called. The neigh init is moved to init_tx for symmeter. [ 2453.376299] BUG: KASAN: slab-use-after-free in mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.379125] Read of size 4 at addr ffff888127af9008 by task modprobe/2496 [ 2453.381542] CPU: 7 PID: 2496 Comm: modprobe Tainted: G B 6.4.0-rc7+ #15 [ 2453.383386] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2453.384335] Call Trace: [ 2453.384625] <TASK> [ 2453.384891] dump_stack_lvl+0x33/0x50 [ 2453.385285] print_report+0xc2/0x610 [ 2453.385667] ? __virt_addr_valid+0xb1/0x130 [ 2453.386091] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.386757] kasan_report+0xae/0xe0 [ 2453.387123] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.387798] mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.388465] mlx5e_rep_encap_entry_detach+0xa6/0xe0 [mlx5_core] [ 2453.389111] mlx5e_encap_dealloc+0xa7/0x100 [mlx5_core] [ 2453.389706] mlx5e_tc_tun_encap_dests_unset+0x61/0xb0 [mlx5_core] [ 2453.390361] mlx5_free_flow_attr_actions+0x11e/0x340 [mlx5_core] [ 2453.391015] ? complete_all+0x43/0xd0 [ 2453.391398] ? free_flow_post_acts+0x38/0x120 [mlx5_core] [ 2453.392004] mlx5e_tc_del_fdb_flow+0x4ae/0x690 [mlx5_core] [ 2453.392618] mlx5e_tc_del_fdb_peers_flow+0x308/0x370 [mlx5_core] [ 2453.393276] mlx5e_tc_clean_fdb_peer_flows+0xf5/0x140 [mlx5_core] [ 2453.393925] mlx5_esw_offloads_unpair+0x86/0x540 [mlx5_core] [ 2453.394546] ? mlx5_esw_offloads_set_ns_peer.isra.0+0x180/0x180 [mlx5_core] [ 2453.395268] ? down_write+0xaa/0x100 [ 2453.395652] mlx5_esw_offloads_devcom_event+0x203/0x530 [mlx5_core] [ 2453.396317] mlx5_devcom_send_event+0xbb/0x190 [mlx5_core] [ 2453.396917] mlx5_esw_offloads_devcom_cleanup+0xb0/0xd0 [mlx5_core] [ 2453.397582] mlx5e_tc_esw_cleanup+0x42/0x120 [mlx5_core] [ 2453.398182] mlx5e_rep_tc_cleanup+0x15/0x30 [mlx5_core] [ 2453.398768] mlx5e_cleanup_rep_tx+0x6c/0x80 [mlx5_core] [ 2453.399367] mlx5e_detach_netdev+0xee/0x120 [mlx5_core] [ 2453.399957] mlx5e_netdev_change_profile+0x84/0x170 [mlx5_core] [ 2453.400598] mlx5e_vport_rep_unload+0xe0/0xf0 [mlx5_core] [ 2453.403781] mlx5_eswitch_unregister_vport_reps+0x15e/0x190 [mlx5_core] [ 2453.404479] ? mlx5_eswitch_register_vport_reps+0x200/0x200 [mlx5_core] [ 2453.405170] ? up_write+0x39/0x60 [ 2453.405529] ? kernfs_remove_by_name_ns+0xb7/0xe0 [ 2453.405985] auxiliary_bus_remove+0x2e/0x40 [ 2453.406405] device_release_driver_internal+0x243/0x2d0 [ 2453.406900] ? kobject_put+0x42/0x2d0 [ 2453.407284] bus_remove_device+0x128/0x1d0 [ 2453.407687] device_del+0x240/0x550 [ 2453.408053] ? waiting_for_supplier_show+0xe0/0xe0 [ 2453.408511] ? kobject_put+0xfa/0x2d0 [ 2453.408889] ? __kmem_cache_free+0x14d/0x280 [ 2453.409310] mlx5_rescan_drivers_locked.part.0+0xcd/0x2b0 [mlx5_core] [ 2453.409973] mlx5_unregister_device+0x40/0x50 [mlx5_core] [ 2453.410561] mlx5_uninit_one+0x3d/0x110 [mlx5_core] [ 2453.411111] remove_one+0x89/0x130 [mlx5_core] [ 24 ---truncated--- | ||||
| CVE-2025-68245 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: netpoll: fix incorrect refcount handling causing incorrect cleanup commit efa95b01da18 ("netpoll: fix use after free") incorrectly ignored the refcount and prematurely set dev->npinfo to NULL during netpoll cleanup, leading to improper behavior and memory leaks. Scenario causing lack of proper cleanup: 1) A netpoll is associated with a NIC (e.g., eth0) and netdev->npinfo is allocated, and refcnt = 1 - Keep in mind that npinfo is shared among all netpoll instances. In this case, there is just one. 2) Another netpoll is also associated with the same NIC and npinfo->refcnt += 1. - Now dev->npinfo->refcnt = 2; - There is just one npinfo associated to the netdev. 3) When the first netpolls goes to clean up: - The first cleanup succeeds and clears np->dev->npinfo, ignoring refcnt. - It basically calls `RCU_INIT_POINTER(np->dev->npinfo, NULL);` - Set dev->npinfo = NULL, without proper cleanup - No ->ndo_netpoll_cleanup() is either called 4) Now the second target tries to clean up - The second cleanup fails because np->dev->npinfo is already NULL. * In this case, ops->ndo_netpoll_cleanup() was never called, and the skb pool is not cleaned as well (for the second netpoll instance) - This leaks npinfo and skbpool skbs, which is clearly reported by kmemleak. Revert commit efa95b01da18 ("netpoll: fix use after free") and adds clarifying comments emphasizing that npinfo cleanup should only happen once the refcount reaches zero, ensuring stable and correct netpoll behavior. | ||||
| CVE-2025-68240 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: avoid having an active sc_timer before freeing sci Because kthread_stop did not stop sc_task properly and returned -EINTR, the sc_timer was not properly closed, ultimately causing the problem [1] reported by syzbot when freeing sci due to the sc_timer not being closed. Because the thread sc_task main function nilfs_segctor_thread() returns 0 when it succeeds, when the return value of kthread_stop() is not 0 in nilfs_segctor_destroy(), we believe that it has not properly closed sc_timer. We use timer_shutdown_sync() to sync wait for sc_timer to shutdown, and set the value of sc_task to NULL under the protection of lock sc_state_lock, so as to avoid the issue caused by sc_timer not being properly shutdowned. [1] ODEBUG: free active (active state 0) object: 00000000dacb411a object type: timer_list hint: nilfs_construction_timeout Call trace: nilfs_segctor_destroy fs/nilfs2/segment.c:2811 [inline] nilfs_detach_log_writer+0x668/0x8cc fs/nilfs2/segment.c:2877 nilfs_put_super+0x4c/0x12c fs/nilfs2/super.c:509 | ||||
| CVE-2025-68233 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Add call to put_pid() Add a call to put_pid() corresponding to get_task_pid(). host1x_memory_context_alloc() does not take ownership of the PID so we need to free it here to avoid leaking. [mperttunen@nvidia.com: reword commit message] | ||||
| CVE-2025-68231 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempool: fix poisoning order>0 pages with HIGHMEM The kernel test has reported: BUG: unable to handle page fault for address: fffba000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 03171067 *pte = 00000000 Oops: Oops: 0002 [#1] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G T 6.18.0-rc2-00031-gec7f31b2a2d3 #1 NONE a1d066dfe789f54bc7645c7989957d2bdee593ca Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 EIP: memset (arch/x86/include/asm/string_32.h:168 arch/x86/lib/memcpy_32.c:17) Code: a5 8b 4d f4 83 e1 03 74 02 f3 a4 83 c4 04 5e 5f 5d 2e e9 73 41 01 00 90 90 90 3e 8d 74 26 00 55 89 e5 57 56 89 c6 89 d0 89 f7 <f3> aa 89 f0 5e 5f 5d 2e e9 53 41 01 00 cc cc cc 55 89 e5 53 57 56 EAX: 0000006b EBX: 00000015 ECX: 001fefff EDX: 0000006b ESI: fffb9000 EDI: fffba000 EBP: c611fbf0 ESP: c611fbe8 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010287 CR0: 80050033 CR2: fffba000 CR3: 0316e000 CR4: 00040690 Call Trace: poison_element (mm/mempool.c:83 mm/mempool.c:102) mempool_init_node (mm/mempool.c:142 mm/mempool.c:226) mempool_init_noprof (mm/mempool.c:250 (discriminator 1)) ? mempool_alloc_pages (mm/mempool.c:640) bio_integrity_initfn (block/bio-integrity.c:483 (discriminator 8)) ? mempool_alloc_pages (mm/mempool.c:640) do_one_initcall (init/main.c:1283) Christoph found out this is due to the poisoning code not dealing properly with CONFIG_HIGHMEM because only the first page is mapped but then the whole potentially high-order page is accessed. We could give up on HIGHMEM here, but it's straightforward to fix this with a loop that's mapping, poisoning or checking and unmapping individual pages. | ||||
| CVE-2025-68227 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix proto fallback detection with BPF The sockmap feature allows bpf syscall from userspace, or based on bpf sockops, replacing the sk_prot of sockets during protocol stack processing with sockmap's custom read/write interfaces. ''' tcp_rcv_state_process() syn_recv_sock()/subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot ''' When the server has MPTCP enabled but the client sends a TCP SYN without MPTCP, subflow_syn_recv_sock() performs a fallback on the subflow, replacing the subflow sk's sk_prot with the native sk_prot. ''' subflow_syn_recv_sock() subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override() ''' Then, this subflow can be normally used by sockmap, which replaces the native sk_prot with sockmap's custom sk_prot. The issue occurs when the user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops(). Here, it uses sk->sk_prot to compare with the native sk_prot, but this is incorrect when sockmap is used, as we may incorrectly set sk->sk_socket->ops. This fix uses the more generic sk_family for the comparison instead. Additionally, this also prevents a WARNING from occurring: result from ./scripts/decode_stacktrace.sh: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \ (net/mptcp/protocol.c:4005) Modules linked in: ... PKRU: 55555554 Call Trace: <TASK> do_accept (net/socket.c:1989) __sys_accept4 (net/socket.c:2028 net/socket.c:2057) __x64_sys_accept (net/socket.c:2067) x64_sys_call (arch/x86/entry/syscall_64.c:41) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f87ac92b83d ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-68225 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lib/test_kho: check if KHO is enabled We must check whether KHO is enabled prior to issuing KHO commands, otherwise KHO internal data structures are not initialized. | ||||