Export limit exceeded: 24733 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24733 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2019-1543 | 2 Openssl, Redhat | 2 Openssl, Enterprise Linux | 2026-11-02 | N/A |
| ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for every encryption operation. RFC 7539 specifies that the nonce value (IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and front pads the nonce with 0 bytes if it is less than 12 bytes. However it also incorrectly allows a nonce to be set of up to 16 bytes. In this case only the last 12 bytes are significant and any additional leading bytes are ignored. It is a requirement of using this cipher that nonce values are unique. Messages encrypted using a reused nonce value are susceptible to serious confidentiality and integrity attacks. If an application changes the default nonce length to be longer than 12 bytes and then makes a change to the leading bytes of the nonce expecting the new value to be a new unique nonce then such an application could inadvertently encrypt messages with a reused nonce. Additionally the ignored bytes in a long nonce are not covered by the integrity guarantee of this cipher. Any application that relies on the integrity of these ignored leading bytes of a long nonce may be further affected. Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe because no such use sets such a long nonce value. However user applications that use this cipher directly and set a non-default nonce length to be longer than 12 bytes may be vulnerable. OpenSSL versions 1.1.1 and 1.1.0 are affected by this issue. Due to the limited scope of affected deployments this has been assessed as low severity and therefore we are not creating new releases at this time. Fixed in OpenSSL 1.1.1c (Affected 1.1.1-1.1.1b). Fixed in OpenSSL 1.1.0k (Affected 1.1.0-1.1.0j). | ||||
| CVE-2019-12439 | 2 Projectatomic, Redhat | 2 Bubblewrap, Cloudforms Managementengine | 2026-11-02 | N/A |
| bubblewrap.c in Bubblewrap before 0.3.3 misuses temporary directories in /tmp as a mount point. In some particular configurations (related to XDG_RUNTIME_DIR), a local attacker may abuse this flaw to prevent other users from executing bubblewrap or potentially execute code. | ||||
| CVE-2019-10072 | 2 Apache, Redhat | 2 Tomcat, Jboss Enterprise Web Server | 2026-11-02 | N/A |
| The fix for CVE-2019-0199 was incomplete and did not address HTTP/2 connection window exhaustion on write in Apache Tomcat versions 9.0.0.M1 to 9.0.19 and 8.5.0 to 8.5.40 . By not sending WINDOW_UPDATE messages for the connection window (stream 0) clients were able to cause server-side threads to block eventually leading to thread exhaustion and a DoS. | ||||
| CVE-2019-0232 | 3 Apache, Microsoft, Redhat | 3 Tomcat, Windows, Jboss Enterprise Web Server | 2026-11-02 | N/A |
| When running on Windows with enableCmdLineArguments enabled, the CGI Servlet in Apache Tomcat 9.0.0.M1 to 9.0.17, 8.5.0 to 8.5.39 and 7.0.0 to 7.0.93 is vulnerable to Remote Code Execution due to a bug in the way the JRE passes command line arguments to Windows. The CGI Servlet is disabled by default. The CGI option enableCmdLineArguments is disable by default in Tomcat 9.0.x (and will be disabled by default in all versions in response to this vulnerability). For a detailed explanation of the JRE behaviour, see Markus Wulftange's blog (https://codewhitesec.blogspot.com/2016/02/java-and-command-line-injections-in-windows.html) and this archived MSDN blog (https://web.archive.org/web/20161228144344/https://blogs.msdn.microsoft.com/twistylittlepassagesallalike/2011/04/23/everyone-quotes-command-line-arguments-the-wrong-way/). | ||||
| CVE-2019-0221 | 2 Apache, Redhat | 2 Tomcat, Jboss Enterprise Web Server | 2026-11-02 | N/A |
| The SSI printenv command in Apache Tomcat 9.0.0.M1 to 9.0.0.17, 8.5.0 to 8.5.39 and 7.0.0 to 7.0.93 echoes user provided data without escaping and is, therefore, vulnerable to XSS. SSI is disabled by default. The printenv command is intended for debugging and is unlikely to be present in a production website. | ||||
| CVE-2017-5647 | 2 Apache, Redhat | 3 Tomcat, Enterprise Linux, Jboss Enterprise Web Server | 2026-11-02 | N/A |
| A bug in the handling of the pipelined requests in Apache Tomcat 9.0.0.M1 to 9.0.0.M18, 8.5.0 to 8.5.12, 8.0.0.RC1 to 8.0.42, 7.0.0 to 7.0.76, and 6.0.0 to 6.0.52, when send file was used, results in the pipelined request being lost when send file processing of the previous request completed. This could result in responses appearing to be sent for the wrong request. For example, a user agent that sent requests A, B and C could see the correct response for request A, the response for request C for request B and no response for request C. | ||||
| CVE-2026-15809 | 1 Redhat | 4 Confidential Compute Attestation, Openshift, Openshift Container Platform and 1 more | 2026-11-02 | 7.8 High |
| A flaw was found in CRI-O. The fix for a previous vulnerability (CVE-2022-4318) was incorrect, allowing it to be bypassed. An attacker capable of setting environment variables on a container can inject a newline character into the HOME environment variable. This issue allows the addition of arbitrary lines into /etc/passwd by use of a specially crafted environment variable. | ||||
| CVE-2026-11605 | 2 Isc, Redhat | 3 Bind, Bind 9, Hummingbird | 2026-11-02 | 7.5 High |
| The issue is a resource exhaustion vulnerability associated with DNSSEC validation. BIND always validates all RRSIG records in an answer, even if they are not strictly needed. A query to an authoritative server/zone which returns many valid but superfluous RRSIG records causes the validator to waste disproportionate CPU time. This issue affects BIND 9 versions 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, and 9.20.9-S1 through 9.20.24-S1. | ||||
| CVE-2026-81665 | 2 Corosync, Redhat | 10 Corosync, Enterprise Linux, Enterprise Linux Eus and 7 more | 2026-11-02 | 7.5 High |
| A heap-based buffer overflow was found in Corosync's Totem Process Group (totempg) message reassembly. When processing fragmented multicast messages, the buffer used to reassemble fragments lacks a runtime bounds check in release builds. A network-adjacent attacker able to send crafted multicast protocol messages to the cluster could cause a heap buffer overflow with attacker-controlled data. This can crash the Corosync daemon, causing a denial of service to the entire cluster, and may potentially allow further exploitation given sufficient heap-corruption control. | ||||
| CVE-2026-109619 | 4 Paloaltonetworks, Php, Redhat and 1 more | 24 Pan-os, Panorama M-200, Panorama M-300 and 21 more | 2026-11-02 | 8.1 High |
| PHP has various global state that temporarily points into request memory. In some scenarios, global state may not be correctly reset, or may be repopulated after being reset. The global state may then refer to request memory even after it has been freed. Subsequent requests may read or branch on this stale state before it is fully initialized. Multiple strategies can trigger this condition and produce remote code execution (RCE). | ||||
| CVE-2026-109618 | 4 Paloaltonetworks, Php, Redhat and 1 more | 23 Pan-os, Panorama M-200, Panorama M-300 and 20 more | 2026-11-02 | 9.8 Critical |
| PHP uses longjmp() for out-of-memory (OOM) errors to exit the current context and abort handling of the request. Some contexts may not properly account for this scenario and leave request memory in an uninitialized state before performing an allocation. The subsequent request cleanup procedure may read or branch on this memory. Multiple OOM strategies can consistently trigger this condition and lead to remote code execution (RCE). | ||||
| CVE-2026-71225 | 2 Redhat, Smuellerdd | 8 Enterprise Linux, Enterprise Linux Eus, Hardened Images and 5 more | 2026-11-02 | 6.5 Medium |
| A flaw was found in libkcapi. When performing one-shot symmetric cipher operations on large inputs (over 64 KiB) in stateful modes such as Counter (CTR) or Cipher Block Chaining (CBC), the library improperly reuses the Initialization Vector (IV) for each internal data chunk. A remote attacker could potentially exploit this by making an application that uses libkcapi process specially crafted large inputs. This can lead to a significant weakening of data confidentiality, as the repeated IV use can expose relationships in encrypted plaintext, and may also affect data integrity by causing incorrect cryptographic processing. | ||||
| CVE-2026-71227 | 2 Redhat, Smuellerdd | 8 Enterprise Linux, Enterprise Linux Eus, Hardened Images and 5 more | 2026-11-02 | 5.1 Medium |
| A flaw was found in libkcapi. A local attacker can influence an application that uses the Asynchronous Input/Output (AIO) interface. By reusing an AIO-enabled handle after a prior completion error, the _kcapi_aio_read_all() function can enter a non-terminating wait loop. This can lead to a persistent denial of service, making the affected application or thread unresponsive. | ||||
| CVE-2026-74245 | 1 Redhat | 3 Openshift Update Service, Quay, Quay 3 | 2026-11-01 | 5.9 Medium |
| A flaw was found in Red Hat Quay's exported logs feature. An unauthenticated attacker with a valid file ID could download exported action logs without proper authorization. While file IDs are complex, they can be intercepted from plaintext email or webhook callbacks. This vulnerability leads to information disclosure, potentially exposing sensitive data such as usernames, email addresses, IP addresses, and action-specific metadata. | ||||
| CVE-2026-74241 | 1 Redhat | 3 Openshift Update Service, Quay, Quay 3 | 2026-11-01 | 4.8 Medium |
| A flaw was found in Red Hat Quay's external Lightweight Directory Access Protocol (LDAP) authentication handling. When an LDAP referral is returned during authentication, the system does not properly escape the username input. This allows an attacker to inject LDAP filter metacharacters, enabling user-existence oracle attacks at the referral Directory Name (DN). This could also potentially influence which DN is used for password binding in multi-domain Active Directory environments. | ||||
| CVE-2026-15563 | 1 Redhat | 7 Jboss Enterprise Application Platform, Jboss Enterprise Application Platform Els, Jboss Enterprise Application Platform Expansion Pack and 4 more | 2026-11-01 | 7.4 High |
| A flaw was found in EAP's IIOP. The listener's NameService would accept bind operations without authentication, allowing an attacker to hijack JNDI lookups and binding them to a malicious ORB, achieving MITM or DoS on further invocations. | ||||
| CVE-2026-86404 | 1 Redhat | 6 Amq Broker, Build Of Apache Camel For Quarkus, Build Of Apache Camel For Spring Boot and 3 more | 2026-11-01 | 8.8 High |
| EAP's Artemis deserialization configuration permits deserialization by default. ObjectMessage.getObject() uses ObjectInputStreamWithClassLoader, which implements allow-list/block-list filtering via its checkSecurity()/isTrustedType() method. However, by default both allow-list and block-list are empty. When the allow-list is empty (size == 0), isTrustedType() returns true for ALL classes. This means all classes are deserializable by default. | ||||
| CVE-2026-15567 | 1 Redhat | 8 Fuse, Jboss Enterprise Application Platform, Jboss Enterprise Application Platform Els and 5 more | 2026-11-01 | 7.5 High |
| A flaw was found in Wildfly. A remote unauthenticated attacker can trigger OutOfMemoryError as CSIv2Util's GSS token decoder reads an attacker-controlled length field without bounds checking and attempts to allocate a byte array of that size. | ||||
| CVE-2026-15565 | 1 Redhat | 13 Build Of Apache Camel For Spring Boot, Camel Spring Boot, Data Grid 8 and 10 more | 2026-11-01 | 7.5 High |
| A flaw was found in Undertow. A remote attacker can cause Out of Memory on websockets endpoint without authentication on any @ServerEndpoint class that has any @OnMessage method. This allows an attacker to cause Denial of Service attack without authentication and using only a standard WebSocket handshake. | ||||
| CVE-2026-15561 | 1 Redhat | 4 Jboss Enterprise Application Platform, Jboss Enterprise Application Platform Els, Jboss Enterprise Application Platform Expansion Pack and 1 more | 2026-11-01 | 7.5 High |
| A flaw was found in EAP's undertow http/1.1 chunked-transfer decoder. missing limits on size and count would allow an attacker to use an unauthenticated connection to drive the JVM to an OutOfMemory error, stopping all deployments on the listener, and achieving Denial of Service. | ||||