Export limit exceeded: 421242 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26248 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26248 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45937 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: inside-secure/eip93 - fix kernel panic in driver detach During driver detach, the same hash algorithm is unregistered multiple times due to a wrong iterator. | ||||
| CVE-2026-45938 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: pm8916_lbc: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle. | ||||
| CVE-2026-45939 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpib: Fix memory leak in ni_usb_init() In ni_usb_init(), if ni_usb_setup_init() fails, the function returns -EFAULT without freeing the allocated writes buffer, leading to a memory leak. Additionally, ni_usb_setup_init() returns 0 on failure, which causes ni_usb_init() to return -EFAULT, an inappropriate error code for this situation. Fix the leak by freeing writes in the error path. Modify ni_usb_setup_init() to return -EINVAL on failure and propagate this error code in ni_usb_init(). | ||||
| CVE-2024-49924 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: pxafb: Fix possible use after free in pxafb_task() In the pxafb_probe function, it calls the pxafb_init_fbinfo function, after which &fbi->task is associated with pxafb_task. Moreover, within this pxafb_init_fbinfo function, the pxafb_blank function within the &pxafb_ops struct is capable of scheduling work. If we remove the module which will call pxafb_remove to make cleanup, it will call unregister_framebuffer function which can call do_unregister_framebuffer to free fbi->fb through put_fb_info(fb_info), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | pxafb_task pxafb_remove | unregister_framebuffer(info) | do_unregister_framebuffer(fb_info) | put_fb_info(fb_info) | // free fbi->fb | set_ctrlr_state(fbi, state) | __pxafb_lcd_power(fbi, 0) | fbi->lcd_power(on, &fbi->fb.var) | //use fbi->fb Fix it by ensuring that the work is canceled before proceeding with the cleanup in pxafb_remove. Note that only root user can remove the driver at runtime. | ||||
| CVE-2026-45903 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix memory access flags in helper prototypes After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"), the verifier started relying on the access type flags in helper function prototypes to perform memory access optimizations. Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the verifier to incorrectly assume that the buffer contents are unchanged across the helper call. Consequently, the verifier may optimize away subsequent reads based on this wrong assumption, leading to correctness issues. For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM which correctly indicates write access to potentially uninitialized memory. Similar issues were recently addressed for specific helpers in commit ac44dcc788b9 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer") and commit 2eb7648558a7 ("bpf: Specify access type of bpf_sysctl_get_name args"). Fix these prototypes by adding the correct memory access flags. | ||||
| CVE-2026-45906 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: pf1550: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle. | ||||
| CVE-2026-45907 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlocks between devlink and netdev instance locks In the mentioned "Fixes" commit, various work tasks triggering devlink health reporter recovery were switched to use netdev_trylock to protect against concurrent tear down of the channels being recovered. But this had the side effect of introducing potential deadlocks because of incorrect lock ordering. The correct lock order is described by the init flow: probe_one -> mlx5_init_one (acquires devlink lock) -> mlx5_init_one_devl_locked -> mlx5_register_device -> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe -> register_netdev (acquires rtnl lock) -> register_netdevice (acquires netdev lock) => devlink lock -> rtnl lock -> netdev lock. But in the current recovery flow, the order is wrong: mlx5e_tx_err_cqe_work (acquires netdev lock) -> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report -> devlink_health_report (acquires devlink lock => boom!) -> devlink_health_reporter_recover -> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx -> mlx5e_tx_reporter_err_cqe_recover The same pattern exists in: mlx5e_reporter_rx_timeout mlx5e_reporter_tx_ptpsq_unhealthy mlx5e_reporter_tx_timeout Fix these by moving the netdev_trylock calls from the work handlers lower in the call stack, in the respective recovery functions, where they are actually necessary. | ||||
| CVE-2026-45914 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "hwmon: (ibmpex) fix use-after-free in high/low store" This reverts commit 6946c726c3f4c36f0f049e6f97e88c510b15f65d. Jean Delvare points out that the patch does not completely fix the reported problem, that it in fact introduces a (new) race condition, and that it may actually not be needed in the first place. Various AI reviews agree. Specific and relevant AI feedback: " This reordering sets the driver data to NULL before removing the sensor attributes in the loop below. ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but does not check if it is NULL before dereferencing it to access data->sensors[]. If a userspace process reads a sensor file (like temp1_input) while this delete function is running, could it race with the dev_set_drvdata(..., NULL) call here and crash in ibmpex_show_sensor()? Would it be safer to keep the original order where device_remove_file() is called before clearing the driver data? device_remove_file() should wait for any active sysfs callbacks to complete, which might already prevent the use-after-free this patch intends to fix. " Revert the offending patch. If it can be shown that the originally reported alleged race condition does indeed exist, it can always be re-introduced with a complete fix. | ||||
| CVE-2026-45849 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj() ocelot_port_xmit_inj() calls ocelot_can_inject() and ocelot_port_inject_frame() without holding the injection group lock. Both functions contain lockdep_assert_held() for the injection lock, and the correct caller felix_port_deferred_xmit() properly acquires the lock using ocelot_lock_inj_grp() before calling these functions. Add ocelot_lock_inj_grp()/ocelot_unlock_inj_grp() around the register injection path to fix the missing lock protection. The FDMA path is not affected as it uses its own locking mechanism. | ||||
| CVE-2026-45858 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1 When allocating initialized blocks from a large unwritten extent, or when splitting an unwritten extent during end I/O and converting it to initialized, there is currently a potential issue of stale data if the extent needs to be split in the middle. 0 A B N [UUUUUUUUUUUU] U: unwritten extent [--DDDDDDDD--] D: valid data |<- ->| ----> this range needs to be initialized ext4_split_extent() first try to split this extent at B with EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but ext4_split_extent_at() failed to split this extent due to temporary lack of space. It zeroout B to N and mark the entire extent from 0 to N as written. 0 A B N [WWWWWWWWWWWW] W: written extent [SSDDDDDDDDZZ] Z: zeroed, S: stale data ext4_split_extent() then try to split this extent at A with EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and left a stale written extent from 0 to A. 0 A B N [WW|WWWWWWWWWW] [SS|DDDDDDDDZZ] Fix this by pass EXT4_EXT_DATA_PARTIAL_VALID1 to ext4_split_extent_at() when splitting at B, don't convert the entire extent to written and left it as unwritten after zeroing out B to N. The remaining work is just like the standard two-part split. ext4_split_extent() will pass the EXT4_EXT_DATA_VALID2 flag when it calls ext4_split_extent_at() for the second time, allowing it to properly handle the split. If the split is successful, it will keep extent from 0 to A as unwritten. | ||||
| CVE-2026-45875 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mfd: arizona: Fix regulator resource leak on wm5102_clear_write_sequencer() failure The wm5102_clear_write_sequencer() helper may return an error and just return, bypassing the cleanup sequence and causing regulators to remain enabled, leading to a resource leak. Change the direct return to jump to the err_reset label to properly free the resources. | ||||
| CVE-2026-45882 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: pm8916_bms_vm: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle. | ||||
| CVE-2026-45884 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: avoid per-cpu hold underflow in aa_get_buffer When aa_get_buffer() pulls from the per-cpu list it unconditionally decrements cache->hold. If hold reaches 0 while count is still non-zero, the unsigned decrement wraps to UINT_MAX. This keeps hold non-zero for a very long time, so aa_put_buffer() never returns buffers to the global list, which can starve other CPUs and force repeated kmalloc(aa_g_path_max) allocations. Guard the decrement so hold never underflows. | ||||
| CVE-2026-45885 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: cpcap-battery: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle. | ||||
| CVE-2026-45887 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix memleak of newsk in unix_stream_connect(). When prepare_peercred() fails in unix_stream_connect(), unix_release_sock() is not called for newsk, and the memory is leaked. Let's move prepare_peercred() before unix_create1(). | ||||
| CVE-2026-23301 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SDCA: Add allocation failure check for Entity name Currently find_sdca_entity_iot() can allocate a string for the Entity name but it doesn't check if that allocation succeeded. Add the missing NULL check after the allocation. | ||||
| CVE-2026-23305 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix unwinding in error path in rocket_probe When rocket_core_init() fails (as could be the case with EPROBE_DEFER), we need to properly unwind by decrementing the counter we just incremented and if this is the first core we failed to probe, remove the rocket DRM device with rocket_device_fini() as well. This matches the logic in rocket_remove(). Failing to properly unwind results in out-of-bounds accesses. | ||||
| CVE-2026-23306 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free in pm8001_queue_command() Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors pm8001_queue_command(), however it introduces a potential cause of a double free scenario when it changes the function to return -ENODEV in case of phy down/device gone state. In this path, pm8001_queue_command() updates task status and calls task_done to indicate to upper layer that the task has been handled. However, this also frees the underlying SAS task. A -ENODEV is then returned to the caller. When libsas sas_ata_qc_issue() receives this error value, it assumes the task wasn't handled/queued by LLDD and proceeds to clean up and free the task again, resulting in a double free. Since pm8001_queue_command() handles the SAS task in this case, it should return 0 to the caller indicating that the task has been handled. | ||||
| CVE-2026-45890 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xen-netback: reject zero-queue configuration from guest A malicious or buggy Xen guest can write "0" to the xenbus key "multi-queue-num-queues". The connect() function in the backend only validates the upper bound (requested_num_queues > xenvif_max_queues) but not zero, allowing requested_num_queues=0 to reach vzalloc(array_size(0, sizeof(struct xenvif_queue))), which triggers WARN_ON_ONCE(!size) in __vmalloc_node_range(). On systems with panic_on_warn=1, this allows a guest-to-host denial of service. The Xen network interface specification requires the queue count to be "greater than zero". Add a zero check to match the validation already present in xen-blkback, which has included this guard since its multi-queue support was added. | ||||
| CVE-2026-45895 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: quota: fix livelock between quotactl and freeze_super When a filesystem is frozen, quotactl_block() enters a retry loop waiting for the filesystem to thaw. It acquires s_umount, checks the freeze state, drops s_umount and uses sb_start_write() - sb_end_write() pair to wait for the unfreeze. However, this retry loop can trigger a livelock issue, specifically on kernels with preemption disabled. The mechanism is as follows: 1. freeze_super() sets SB_FREEZE_WRITE and calls sb_wait_write(). 2. sb_wait_write() calls percpu_down_write(), which initiates synchronize_rcu(). 3. Simultaneously, quotactl_block() spins in its retry loop, immediately executing the sb_start_write() - sb_end_write() pair. 4. Because the kernel is non-preemptible and the loop contains no scheduling points, quotactl_block() never yields the CPU. This prevents that CPU from reaching an RCU quiescent state. 5. synchronize_rcu() in the freezer thread waits indefinitely for the quotactl_block() CPU to report a quiescent state. 6. quotactl_block() spins indefinitely waiting for the freezer to advance, which it cannot do as it is blocked on the RCU sync. This results in a hang of the freezer process and 100% CPU usage by the quota process. While this can occur intermittently on multi-core systems, it is reliably reproducing on a node with the following script, running both the freezer and the quota toggle on the same CPU: # mkfs.ext4 -O quota /dev/sda 2g && mkdir a_mount # mount /dev/sda -o quota,usrquota,grpquota a_mount # taskset -c 3 bash -c "while true; do xfs_freeze -f a_mount; \ xfs_freeze -u a_mount; done" & # taskset -c 3 bash -c "while true; do quotaon a_mount; \ quotaoff a_mount; done" & Adding cond_resched() to the retry loop fixes the issue. It acts as an RCU quiescent state, allowing synchronize_rcu() in percpu_down_write() to complete. | ||||