Export limit exceeded: 426532 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (426532 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-120687 | 2026-11-16 | 7.2 High | ||
| The Lightbox & Modal Popup WordPress Plugin – FooBox plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via the 'img alt attribute inside .wp-caption container' parameter in all versions up to, and including, 2.8.7 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is exploitable by Subscriber-level users when bbPress is installed, as its bbp_filter_kses filter chain permits img and pre tags while preserving numeric character references inside attribute values, allowing encoded payloads to bypass save-time sanitization and reach the vulnerable sink fully intact. Exploitation by attackers with subscriber-level access and above requires that bbPress 2.6.20 is installed, a public forum exists, and either the first topic has already been approved or subsequent topics clear moderation. On a default installation, where that is not configured, the vulnerability requires attackers with contributor-level access and above. | ||||
| CVE-2026-119615 | 2 Maltesesolutions, Wordpress-extensions | 2 Reset Database, Reset Database | 2026-11-16 | 8.8 High |
| The Reset Database plugin for WordPress is vulnerable to privilege escalation in versions up to, and including, 1.1.3. This is due to the process_reset() function being registered on admin_init with no capability check, a computed-but-unused nonce, a gating condition that passes whenever no WordPress administrator literally named 'admin' exists (the default on modern installs), and an identity test that verifies the ATTACKER'S OWN password rather than an administrator's. This makes it possible for authenticated attackers, with subscriber-level access and above, to drop every prefixed database table, re-run wp_install() with their own credentials — making the attacker the sole site administrator — authenticate as that administrator via wp_set_auth_cookie(), and delete the uploads directory. | ||||
| CVE-2026-119055 | 1 Schneider-electric | 1 Ecostruxure Power Build - Rapsody | 2026-11-16 | N/A |
| CWE- 416: Use After Free vulnerability exists that could cause arbitrary code execution when a local attacker could trick the end user to open a specially crafted malicious SSD file. | ||||
| CVE-2026-114468 | 1 Ibm | 2 App Connect Enterprise Certified Containers Operands, App Connect Operator | 2026-11-16 | 6 Medium |
| IBM App Connect Operator and App Connect Enterprise Certified Containers Operands could allow an attacker with the ability to run HTTP calls within the running container to can make administrative calls to a running IntegrationRuntime. | ||||
| CVE-2026-110531 | 2 Foliovision, Wordpress-extensions | 2 Fv Player 8, Fv Player 8 | 2026-11-16 | 6.4 Medium |
| The FV Player 8 plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'fv_player_videos' parameter in all versions up to, and including, 8.1.9 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the administrator-controlled "Allow visitors to upload videos to their profile" setting to be enabled, without which the vulnerable save routine is inaccessible to Subscriber-level users. | ||||
| CVE-2026-110279 | 1 Ibm | 2 Contextforge, Contextforge Mcp Gateway | 2026-11-16 | 8.1 High |
| IBM ContextForge MCP Gateway 1.0.0 through 1.1.0 is vulnerable to improper credential handling because the X-Upstream-Authorization request header can override the gateway-managed upstream credential for OAuth (authorization_code and client_credentials), bearer and basic authenticated gateways, which could allow an authenticated user to cause upstream requests to be made with a different credential and bypass per-user permission and audit attribution. | ||||
| CVE-2026-110199 | 1 Ibm | 2 Contextforge, Contextforge Mcp Gateway | 2026-11-16 | 4.8 Medium |
| IBM ContextForge MCP Gateway 1.0.0 through 1.0.11 is vulnerable to cross-site scripting. This vulnerability allows a privileged user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | ||||
| CVE-2026-110189 | 1 Ibm | 2 Contextforge, Contextforge Mcp Gateway | 2026-11-16 | 6.5 Medium |
| IBM ContextForge MCP Gateway 1.0.8 through 1.0.11, and v1.1.0 is vulnerable to denial of service due to an incomplete denylist in the jq filter guard module (CWE-184). An authenticated remote attacker can supply a crafted `jsonpath_filter` value containing `halt`, `halt_error`, or unbounded-loop built-ins that bypass the safety check, causing gateway worker process termination or sustained resource exhaustion. | ||||
| CVE-2026-108562 | 1 Revive | 1 Adserver | 2026-11-16 | N/A |
| A stored cross-site scripting vulnerability in maintenance-appendcode-check.php in Revive Adserver 6.0.8 and earlier allows an authenticated manager to execute JavaScript in an administrator's browser. A manager can store a malicious tracker name and cause the tracker to appear in the append-code maintenance results. When an administrator opens the affected maintenance page, the tracker name is included in HTML without appropriate encoding. The issue is fixed in Revive Adserver 6.0.9 by HTML-encoding tracker names when displaying the maintenance results. | ||||
| CVE-2026-108290 | 1 Ibm | 1 Cyber Fraud | 2026-11-16 | 4 Medium |
| IBM Cyber Fraud 1.0.0 through 1.1.0 could allow an attacker with local access to a container to extract sensitive information due to unrestrictive network policies. | ||||
| CVE-2026-108169 | 1 The Document Foundation | 1 Libreoffice | 2026-11-16 | N/A |
| LibreOffice can open a web query file (.iqy), which names a web page to import into a spreadsheet, when the file is given on its command line, for example when a file manager or another program opens the file with LibreOffice. The address in such a file was used without the checks that apply to an address given on the command line directly, so a crafted file could make LibreOffice do something other than open a web page, up to running code. In fixed versions only an http or https address is taken from a web query file. | ||||
| CVE-2026-107520 | 1 Dell | 12 Powerstore 1000t, Powerstore 1200t, Powerstore 3000t and 9 more | 2026-11-16 | 5.4 Medium |
| Dell PowerStore contains a stored cross-site scripting (XSS) vulnerability. A low-privileged authenticated attacker could exploit this vulnerability, potentially leading to execution of malicious script in a higher-privileged user's session. | ||||
| CVE-2026-105437 | 2 Git, Git-scm | 2 Git, Git | 2026-11-16 | 7.5 High |
| Affected versions of Git have a heap buffer overflow in the three-way merge code (xdiff), which an attacker can trigger through a repository they control. When Git merges a file, it first adds up the size of the merged output, allocates a buffer of that size, and then writes the output into it. That total was kept in a 32-bit signed integer. The conflict-marker-size attribute, which can be set from a committed .gitattributes file, accepts any positive integer, and the markers are written several times for every conflict. A small file with a huge marker size and many separate conflicts can therefore push the total past 4 GiB, so the integer wraps to a small value and Git writes attacker-controlled merge output past the end of a buffer that is too small. At minimum this crashes Git, and because the overflow is large and its contents are largely attacker-controlled, worse heap corruption is possible. Any command that does a textual three-way merge can trigger it, such as git-merge(1), git-rebase(1), git-cherry-pick(1), and git-merge-tree(1). The latter is most likely a target for Git forges, which might use git-merge-tree(1) on the server-side to check mergeability. When the server reads attributes from trees in the repository (for example through attr.tree or --attr-source), any user who can push branches and request that they be merged (for example by opening a pull or merge request) can trigger the overflow without anyone else doing anything, and the data they push is small because the oversized output only appears during the merge. The problem has been patched by computing the size as size_t and checking every addition for overflow, so Git stops with an error instead of overflowing. Servers that cannot upgrade right away can add * conflict-marker-size=7 to each repository's info/attributes as a workaround, which overrides any in-tree .gitattributes, or turn off server-side mergeability checks for untrusted repositories. | ||||
| CVE-2026-104920 | 1 The Document Foundation | 1 Libreoffice | 2026-11-16 | N/A |
| LibreOffice Calc can link a cell range to an external data source, and the link is saved in the document. A Java database driver for such a link is loaded from a class path. Opening a crafted document could still load a Java database driver from a location outside the local machine and run its code, by a route that the fix for CVE-2026-63277 did not cover. In fixed versions an entry in a Java class path has to be a file URL that names a file on the local machine. | ||||
| CVE-2026-104692 | 1 The Document Foundation | 1 Libreoffice | 2026-11-16 | N/A |
| LibreOffice bundles the HSQLDB database engine, which can be used through the generic JDBC database driver as well as through the support for embedded databases. HSQLDB lets SQL statements call Java methods, limited to the classes that are permitted. When HSQLDB was used through the generic JDBC driver this limit did not apply, so SQL in a crafted document could call any Java method and run code. In fixed versions SQL can call only the built-in functions of HSQLDB, whichever way the database is reached. | ||||
| CVE-2026-104007 | 1 The Document Foundation | 1 Libreoffice | 2026-11-16 | N/A |
| LibreOffice can connect to databases through JDBC drivers written in Java. A spreadsheet can use a database as the source of a pivot table, and the database document that describes the connection names the driver to use. The location the driver was loaded from was taken from the database document itself, so a crafted document could make LibreOffice load and run Java code that the document supplied when it was opened. This is a different route to the problem fixed for CVE-2026-63277. In fixed versions the driver location is taken only from the driver configuration of the user, and a pivot table whose source is a database document named by a URL connects only once the user allows links to be updated. | ||||
| CVE-2026-103980 | 1 3xpyth0n | 1 Ideon | 2026-11-16 | N/A |
| ideon is a self-hosted visual workspace. Prior to version 0.9.6, the SSRF protection in safeFetch is bypassed by IPv6 transition addresses that embed private IPv4 addresses. The isPrivateIP function in src/app/lib/ssrf.ts checks only a narrow set of IPv6 ranges (loopback ::1, ULA fc/fd, link-local fe80) but does not recognize IPv4-mapped (::ffff:), NAT64 well-known (64:ff9b::/96, RFC 6052), NAT64 local-use (64:ff9b:1::/48, RFC 8215), 6to4 (2002::/16, RFC 3056), or Teredo (2001::/32, RFC 4380) encodings. An authenticated user can supply these addresses in link URLs to reach cloud metadata endpoints (169.254.169.254), localhost services, and RFC 1918 internal networks through the link preview metadata fetcher. This issue has been patched in version 0.9.6. | ||||
| CVE-2026-102537 | 1 Bacnetstack | 1 Bacnet Stack | 2026-11-16 | N/A |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.6, 1.5.2, and 1.6.1, bws_cli_connect() in ports/linux/websocket-cli.c loads the trusted CA cert into the libwebsockets context, then always sets LCCSCF_ALLOW_SELFSIGNED in the connection flags. So lws accepts any self-signed hub certificate, whether or not it chains to the loaded CA. A BACnet/SC node finishes the TLS handshake to a rogue hub that presents a self-signed cert. It then hands the attacker its identity (VMAC, UUID) and all later BACnet traffic. This issue has been patched in versions 1.4.6, 1.5.2, 1.6.1, and 1.7.0. | ||||
| CVE-2026-101892 | 1 The Document Foundation | 1 Libreoffice | 2026-11-16 | N/A |
| LibreOffice documents in ODF format can contain form controls, such as buttons and text fields, and each control names the component that implements it. The component a control named was created even when it was not a form control, and the settings stored with the control were applied to it, so a crafted document could change the configuration of LibreOffice in a way that led to code being run. In fixed versions a control whose component is not a form control is ignored. | ||||
| CVE-2026-101353 | 1 The Document Foundation | 1 Libreoffice | 2026-11-16 | N/A |
| LibreOffice Base documents can contain an embedded HSQLDB database, and other documents can use such a database as a data source. The definition of the database in a crafted document could make the database engine create or write files at locations outside the document, chosen by the document. In fixed versions the files of an embedded database are kept in a private location, and an embedded database cannot create table files anywhere else. | ||||