Export limit exceeded: 429091 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (429091 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99305 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use dlfb_setup_modes() frees info->modelist with fb_destroy_modelist() and rebuilds it, but fbcon holds raw pointers into that list in fb_display[i].mode and nothing un-publishes them the way do_unregister_framebuffer() and store_modes() do with fbcon_delete_modelist(). The function does refuse to install a new mode while the framebuffer has users (dlfb->fb_count != 0), but only after the list is already destroyed. Reached from the 0666 "edid" sysfs attribute, an unprivileged write to /sys/class/graphics/fb0/edid therefore fails with -EINVAL and still leaves every fb_display[i].mode dangling; the next console switch reads the freed fb_videomode in fb_videomode_to_var(). Test fb_count before touching the list. fbcon takes a reference through fbcon_open(), so that condition covers exactly the states in which fb_display[] points into the list, and the errno returned to userspace is unchanged. BUG: KASAN: slab-use-after-free in fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905) Read of size 4 at addr ffff8880107b449c by task kworker/1:1/47 Workqueue: events console_callback Call Trace: fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905) display_to_var (drivers/video/fbdev/core/fbcon.c:998) fbcon_switch (drivers/video/fbdev/core/fbcon.c:2182) redraw_screen (drivers/tty/vt/vt.c:994) complete_change_console (drivers/tty/vt/vt_ioctl.c:1141) console_callback (drivers/tty/vt/vt.c:3358) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 28 bytes inside of freed 96-byte region [ffff8880107b4480, ffff8880107b44e0) | ||||
| CVE-2026-99304 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix integer overflow in the snap trace bounds check ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps + num_prior_parent_snaps). Both counts come straight off the wire as __le32, so the addition is evaluated in unsigned int and wraps before sizeof(u64) promotes it to size_t: an MDS sending num_snaps = 1 and num_prior_parent_snaps = 0xffffffff makes the sum zero and the check degenerates to ceph_decode_need(&p, e, 0, bad), which always passes. dup_array() then reads num_snaps * 8 bytes past the end of the message front, which ceph_msg_new2() allocates at exactly front_len bytes. An unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or compromised MDS with no client-side action, as do the snaptraces carried in an MDS reply and in a cap import. Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX instead of wrapping, in the style fs/ceph/mdsmap.c already uses for num_export_targets. BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129 Workqueue: ceph-msgr ceph_con_workfn Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) ceph_update_snap_trace (fs/ceph/snap.c:836) ceph_handle_snap (fs/ceph/snap.c:1155) mds_dispatch (fs/ceph/mds_client.c:7234) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 0 bytes to the right of allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8) | ||||
| CVE-2026-99297 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix double free in em28xx_alloc_urbs When allocation of usb_bufs->buf[i] fails, em28xx_alloc_urbs() explicitly frees all items within usb_bufs->buf before calling em28xx_uninit_usb_xfer(), which also frees these items, causing them to be freed twice. BUG: KASAN: double-free in usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) Free of addr ffff88802fd37c00 by task kworker/1:2/1182 Workqueue: events request_module_async Call Trace: kasan_report_invalid_free (mm/kasan/report.c:557) check_slab_allocation (mm/kasan/common.c:235) kfree (./include/linux/kasan.h:199 (discriminator 1) mm/slub.c:2693 (discriminator 1) mm/slub.c:6508 (discriminator 1) mm/slub.c:6801 (discriminator 1)) usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) usb_free_urb (drivers/usb/core/urb.c:95) em28xx_uninit_usb_xfer (drivers/media/usb/em28xx/em28xx-core.c:964) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1076) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5414 mm/slub.c:5439) em28xx_alloc_urbs (./include/linux/slab.h:995 ./include/linux/slab.h:1312 drivers/media/usb/em28xx/em28xx-core.c:1081) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Freed by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2748 mm/slub.c:6508 mm/slub.c:6801) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1084) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Remove the explicit cleanup loop and let em28xx_uninit_usb_xfer() handle the cleanup. | ||||
| CVE-2026-99296 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: bound mon_command ack decode to front len handle_command_ack() bounds the decode with msg->front_alloc_len, the size of the reply buffer, instead of msg->front.iov_len, the number of bytes the monitor sent. mon_alloc_msg() routes every CEPH_MSG_MON_COMMAND_ACK to get_generic_reply(), which returns the preallocated ->reply of whichever generic request carries the same tid, so the buffer keeps its fixed size however short the reply is. An ack with hdr.front_len below sizeof(struct ceph_mon_request_header) + sizeof(u32), including 0, still passes ceph_decode_need(), and ceph_decode_32() returns four bytes that were never received: uninitialized slab memory, stale bytes of an earlier message, or bytes the peer planted by sending a reply that lands in the same buffer and is then rejected. The read stays within the allocation, so KASAN does not flag it. req->result reaches userspace through ceph_monc_do_statfs(), ceph_monc_get_version() and ceph_monc_blocklist_add(); rbd hands it back from write() on /sys/bus/rbd/add_single_major, and rbd_get_client() passes it to ERR_PTR() unchecked, which faults: rbd: failed to get latest osdmap: -186318427 BUG: unable to handle page fault for address: fffffbfffe9ca034 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:do_rbd_add (drivers/block/rbd.c:7105) Call Trace: ... kernfs_fop_write_iter (fs/kernfs/file.c:345) vfs_write (fs/read_write.c:595 fs/read_write.c:687) ksys_write (fs/read_write.c:739) do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception Use msg->front.iov_len, matching handle_subscribe_ack(), handle_statfs_reply(), handle_get_version_reply() and handle_auth_reply(). A well-formed ack has front.iov_len >= 22 and is unaffected; a short one takes the existing bad: path. This applies commit d3c32939fa0e ("libceph: bound get_version reply decode to front len") to the last decode-side use of front_alloc_len in this file. | ||||
| CVE-2026-99295 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: stop processing a read response after a receive error cifs_read_iter_from_socket() may call cifs_reconnect() before returning an error. The reconnect path aborts pending mids and invokes their callbacks. The callback can then release the cifs_io_subrequest containing rdata. cifs_readv_receive() nevertheless continues after a negative return and may dereference rdata in cifs_readv_discard(). KASAN reports the resulting UAF: BUG: KASAN: slab-use-after-free in cifs_readv_receive Read of size 4 by task cifsd cifs_readv_receive (fs/smb/client/transport.c:1284) cifs_demultiplex_thread (fs/smb/client/connect.c:1355) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) Freed by task 148: netfs_put_subrequest (fs/netfs/objects.c:267) netfs_read_collection (fs/netfs/read_collect.c:460) netfs_wait_for_in_progress (fs/netfs/misc.c:462) Return the socket error immediately, as this path did before the iterator conversion. This also avoids adding a negative length to total_read. | ||||
| CVE-2026-99292 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix slab-out-of-bounds write in id_mode_to_cifs_acl() In id_mode_to_cifs_acl(), while the chown branch reserves sizeof(struct smb_ntsd) + 2 * sizeof(struct smb_sid) (plus sizeof(struct smb_acl) and the worst-case ACE space after commit 0ee150794c75 ("smb: client: fix heap overflow in DACL owner/group rewrite")), the chmod branch only adds 2 * sizeof(struct smb_ace) or 5 * sizeof(struct smb_ace) to secdesclen (or 1 * sizeof(struct smb_ace) on posix). However, the chmod branch also invokes build_sec_desc() -> copy_sec_desc(), which unconditionally writes the Owner SID at pnntsd + sidsoffset and the Group SID at pnntsd + sidsoffset + sizeof(struct smb_sid) (2 * 68 = 136 bytes total), and set_chmod_dacl() always writes a struct smb_acl header (8 bytes) even when the source descriptor has dacloffset == 0. When a security descriptor has compact or overlapping Owner/Group SIDs (or dacloffset == 0), calling chmod() under-allocates pnntsd and writes past the end of the slab buffer. Reserve sizeof(struct smb_acl) + 2 * sizeof(struct smb_sid) (plus sizeof(struct smb_ntsd) on the posix path) in the chmod branch of id_mode_to_cifs_acl(). | ||||
| CVE-2026-99291 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix SMB2 CREATE response buffer overflow smb2_allocate_rsp_buf() uses the MAX_CIFS_SMALL_BUFFER_SIZE (448-byte) buffer for a single SMB2_CREATE response. That buffer also holds a 4-byte length field, which only leaves 444 bytes for the SMB2 body. The AAPL response made this buffer too small. After 8f1b796ff113, a request with AAPL response contexts may need at least 456 bytes. In the 456-byte case, create_aapl_rsp_buf() is appended last, clears 128 bytes, and writes 12 bytes past the allocation. KASAN reports: BUG: KASAN: slab-out-of-bounds in create_aapl_rsp_buf+0x31/0x6e0 Write of size 128 at addr ffff88800370954c by task kworker/0:0/9 ... create_aapl_rsp_buf+0x31/0x6e0 smb2_open+0x58f9/0xef10 ... smb2_allocate_rsp_buf+0x19d/0x370 ... The buggy address is located 332 bytes inside of allocated 448-byte region [ffff888003709400, ffff8880037095c0) Reserve enough space for any fixed CREATE response KSMBD can build. Store the required allocation size in the per-dialect values table. This keeps the small buffer for other commands and avoids using the max transaction buffer for every CREATE. | ||||
| CVE-2026-99290 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free after a failed durable reconnect ksmbd_reopen_durable_fd() republishes a detached durable handle in the reconnecting session's file table and takes no reference for that entry. If smb2_open() then fails, cleanup relies on the final ksmbd_fd_put() to remove the volatile id. Two reconnects of the same handle can both take a lookup reference before either attaches it. If the one that reopens first then fails and drops its references first, the other request makes the final put through ksmbd_put_durable_fd(). That frees the handle without removing the first session's table entry, so tearing that session down writes to freed memory. BUG: KASAN: slab-use-after-free in __close_file_table_ids+0x14d/0x740 [ksmbd] Call Trace: __close_file_table_ids+0x14d/0x740 [ksmbd] ksmbd_destroy_file_table+0x76/0x100 [ksmbd] ksmbd_session_destroy+0xf8/0x480 [ksmbd] ksmbd_dispose_sessions+0x13e/0x200 [ksmbd] ksmbd_conn_sessions_cleanup+0x4c3/0x6d0 [ksmbd] Freed by task 1030: __ksmbd_close_fd+0x97d/0x1000 [ksmbd] smb2_open+0x14eb/0xd9f0 [ksmbd] Commit 3515503322f4 ("ksmbd: fix durable reconnect error path file lifetime") handles a final put made by the reconnecting request, but not one made by another holder. Remove the volatile id under the file-table lock on this error path, before the references are dropped, as ksmbd_close_fd() does on the request_open path just above. Removal then no longer depends on which holder makes the final put. The stale comment in the reconnect cleanup is updated to match. A successful reconnect is unchanged. | ||||
| CVE-2026-99289 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix app-instance non-durable supersede session UAF ksmbd_close_fd_app_instance_id() supersedes a prior open that has the same AppInstanceId. It reaches that open's session through opinfo->sess. This pointer is not refcounted. Session teardown detaches durable handles before it frees the session. It does not detach a non-durable open. That open still points at the session through opinfo->sess after the session is freed. Another session can supersede the open at the same time. The supersede then takes a write lock through the stale pointer, in the freed session's file table. BUG: KASAN: slab-use-after-free in _raw_write_lock+0x71/0xd0 Call Trace: _raw_write_lock+0x71/0xd0 ksmbd_close_fd_app_instance_id+0xd9/0x670 [ksmbd] smb2_open+0x3e10/0xd910 [ksmbd] Freed by task 212: ksmbd_session_destroy+0x38d/0x480 [ksmbd] Fix this by looking the session up by opinfo->session_id. The lookup returns a reference, as smb2_break_collect_channels() does. Recheck that opinfo->sess still points at it before using it. Do the lookup without m_lock held. destroy_previous_session() takes m_lock under the session table lock, and taking them in the other order here would deadlock. | ||||
| CVE-2026-99288 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: inet: reject unhashed sockets during established lookups TCP established ehash lookups are lockless. The socket caches involved use SLAB_TYPESAFE_BY_RCU, so memory can be reused before an RCU reader that retained its old address has finished. After a tuple match, __inet_lookup_established() and __inet6_lookup_established() acquire a reference and repeat the tuple check. They do not check whether the new object is hashed. If the address is reused for a socket with the same tuple, the lookup can acquire a reference to the new object and return it while its nulls node is unhashed. A PoC that drives reuse with a SYN cookie request socket reproduced the crash. The new request socket is unhashed and has a NULL rsk_listener. A lookup that had loaded the address of the old request socket acquired the reference published by tcp_get_cookie_sock() and returned the new object. tcp_v4_rcv() then read sk_state through the NULL listener. The resulting crash was: BUG: kernel NULL pointer dereference, address: 0000000000000012 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... Oops: Oops: 0000 [#1] SMP NOPTI CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 7.3.0-00591-g0e135910deec #1 PREEMPT(lazy) ... RIP: 0010:tcp_v4_rcv+0x44e/0x1280 ... R10: 0000000000000001 R11: 00000000024ca8c0 R12: 0000000000000000 ... CR2: 0000000000000012 CR3: 0000000103d50004 CR4: 0000000000770ef0 ... Call Trace: <IRQ> ? raw_local_deliver+0xae/0x240 ip_protocol_deliver_rcu+0x2d/0x180 ip_local_deliver_finish+0x84/0x100 ip_sublist_rcv_finish+0x5f/0x70 ip_sublist_rcv+0x12a/0x1d0 ip_list_rcv+0xfd/0x130 __netif_receive_skb_list_core+0x223/0x250 netif_receive_skb_list_internal+0x1d2/0x2c0 ? try_fill_recv+0x39/0x7b0 napi_complete_done+0x74/0x170 virtnet_poll+0x445/0x600 __napi_poll+0x27/0x1e0 net_rx_action+0x2fe/0x3b0 handle_softirqs+0xc2/0x2c0 __irq_exit_rcu+0x74/0xd0 common_interrupt+0x7f/0x90 </IRQ> ... Kernel panic - not syncing: Fatal exception in interrupt After taking a reference, check whether the nulls node is unhashed in both IPv4 and IPv6 established lookups. If it is unhashed or the tuple no longer matches, drop the reference and restart the lookup. Lookups racing with the TIME_WAIT hashdance, or with a request being replaced by its child, now restart and find the new socket instead of returning the old one. Request sockets that were never inserted into ehash can have a nonzero refcount, and a stale lookup can hold a transient reference. Therefore, when SYN cookie, Fast Open, and request migration paths fail after setting a nonzero refcount, release the references held by those paths with reqsk_put() instead of freeing the request directly. | ||||
| CVE-2026-131034 | 1 Google | 1 Chrome | 2026-11-19 | 6.5 Medium |
| Incorrect authorization in SurfaceCapture in Google Chrome prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to obtain sensitive information via a crafted Chrome extension. (Chromium security severity: Low) | ||||
| CVE-2026-131040 | 1 Google | 1 Chrome | 2026-11-19 | 6.5 Medium |
| Incorrect authorization in Extensions in Google Chrome prior to 158.0.8127.36 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-115154 | 1 Oracle | 1 Hyperion Infrastructure Technology | 2026-11-19 | 6.8 Medium |
| Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Common Security). The supported version that is affected is 11.2.26.0.000. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Infrastructure Technology accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Infrastructure Technology accessible data. CVSS 3.1 Base Score 6.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:N). | ||||
| CVE-2026-115155 | 1 Oracle | 1 Hyperion Infrastructure Technology | 2026-11-19 | 7.5 High |
| Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Installation and Configuration). The supported version that is affected is 11.2.26.0.000. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Infrastructure Technology. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-121482 | 1 Openssl | 1 Openssl | 2026-11-19 | N/A |
| Verifying a maliciously crafted CMS or PKCS#7 SignedData message with CRL checking enabled may consume excessive CPU time, growing with the square of the message size. | ||||
| CVE-2026-116449 | 1 Dell | 12 Powerstore 1000t, Powerstore 1200t, Powerstore 3000t and 9 more | 2026-11-19 | 9.8 Critical |
| Dell PowerStore SDNAS contains an OS Command Injection vulnerability that could allow an attacker with internal network access to execute arbitrary commands as root on the NAS node. | ||||
| CVE-2026-116441 | 1 Dell | 12 Powerstore 1000t, Powerstore 1200t, Powerstore 3000t and 9 more | 2026-11-19 | 9.6 Critical |
| Dell PowerStore SDNAS contains an out-of-bounds write vulnerability in the storage-processor interconnect driver that could allow a malicious peer to execute code with system privileges. | ||||
| CVE-2026-115622 | 1 Redhat | 1 Ansible Core | 2026-11-19 | 5.5 Medium |
| A flaw was found in ansible-core. When a task or its parameters are marked no_log: true, sensitive values passed to a module's warn() or deprecate() calls are not redacted and are printed in cleartext to stdout/stderr in warning and deprecation messages. The 'warnings' and 'deprecations' keys are retained in the PRESERVE allow-list in lib/ansible/_internal/_task.py when the task result is censored, so sensitive parameters bypass masking and can be disclosed in output captured in terminal sessions, CI logs, and any automation wrapping ansible-playbook, even though every task touching the secrets is marked no_log: true. | ||||
| CVE-2026-133037 | 1 Jetbrains | 1 Teamcity | 2026-11-19 | 6.8 Medium |
| In JetBrains TeamCity before 2026.2.1, 2026.1.5 stored XSS in the GitHub App repository selector was possible | ||||
| CVE-2026-129034 | 2 Wordpress-extensions, Wpchill | 2 Strong Testimonials, Strong Testimonials | 2026-11-19 | 7.1 High |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WP Chill Strong Testimonials strong-testimonials allows Stored XSS.This issue affects Strong Testimonials: from n/a through 3.3.18. | ||||