Export limit exceeded: 11698 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11698 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98696 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix driver deregistration order USB serial driver modules register one driver for the USB bus and one or more drivers for the ports on the USB serial bus. When unloading a driver module, the USB driver must be deregistered before the USB serial bus drivers so that I/O is stopped before unbinding the ports to avoid use-after-free in completion handlers accessing port data. Note that the "new_id" attributes must first be removed to prevent new ids from being added and triggering a probe of the USB driver after it has been deregistered. | ||||
| CVE-2026-98694 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix KASAN reported use-after-free when request is canceled Alan reported that when doing stress testing sometimes KASAN notices use-after-free during control channel operation (stripped down keeping the relevant parts): BUG: KASAN: slab-use-after-free in tb_cfg_request_sync+0x240/0x250 [thunderbolt] Read of size 24 at addr ffff88811067f290 by task kworker/u40:2/1760 <TASK> tb_cfg_request_sync+0x240/0x250 [thunderbolt] tb_cfg_read_raw+0x367/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1760: __kmalloc_cache_noprof+0x1ee/0x550 tb_cfg_read_raw+0x1d3/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 Freed by task 926: kfree+0x18f/0x4a0 tb_cfg_request_put+0xb7/0xe0 [thunderbolt] tb_cfg_request_work+0x82/0x120 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 Second to last potentially related work creation: __queue_work+0x575/0xd00 queue_work_on+0x77/0x80 tb_cfg_request_cancel+0xc7/0x260 [thunderbolt] tb_cfg_request_sync+0x1f6/0x250 [thunderbolt] tb_cfg_read_raw+0x367/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 The last stack trace is helpful because it shows that we are cancelling a request and looking at tb_cfg_request_cancel() what might happen is that tb_cfg_request_work() completes right before tb_cfg_request_cancel() starts and because of this it will call schedule_work() queueing the same work to run again. However, it is already removed from the request_queue and reference count is dropped so when tb_cfg_request_work() triggers again it will access memory that is already released. Fix this so that we first make sure a cancelled request is not handed away from tb_cfg_request_find() or scheduled to run. Then instead of relying on the worker to clean up the request we will do it in tb_cfg_request_cancel() after the work is canceled from running. Make tb_cfg_request_dequeue() release the request only if it was actually removed from the queue. | ||||
| CVE-2026-98670 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: xilinx-xadc: free IRQ before cancelling the unmask worker on unbind The ZYNQ XADC alarm IRQ handler queues zynq_unmask_work via schedule_delayed_work(); that work is cleared by a devm callback. Register the devm callback before devm_request_irq() so the devres LIFO teardown frees the IRQ first, ensuring the handler can no longer queue work by the time the workqueue is cleared. Otherwise the handler could re-arm the work and run it after the xadc structure has been freed. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98662 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap020a00f: drain irq_work after free_irq The threaded IRQ handler queues data->work through irq_work_queue() so the trigger is polled from a per-CPU context. free_irq() does not flush an irq_work the handler already queued, so after gp2ap020a00f_remove() returns that work may still run and call iio_trigger_poll() on data->trig, which the devm cleanup has already freed, causing a use-after-free. Add irq_work_sync(&data->work) after free_irq() in remove() and in the probe error path, mirroring commit 78601726d4a5 ("iio: trigger: sysfs: fix use-after-free on remove"). Found by an in-house static analysis tool, confirmed by manual review. | ||||
| CVE-2026-98656 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: trigger: cancel reenable_work before freeing trigger iio_trigger_notify_done_atomic() defers ->reenable() into trig->reenable_work on the system workqueue, and the worker dereferences the owning trigger through container_of(). Nothing cancels this work before iio_trig_release() frees the trigger, so a worker armed by the last in-flight IRQ can outlive the free and touch freed memory. Cancel it at the top of iio_trig_release(), which every free path reaches through the device core's final put_device(). Found by an in-house static analysis tool. | ||||
| CVE-2026-98171 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs Fix several related bounds checking and pointer lifecycle issues in receive_encrypted_standard()'s handling of compound encrypted frames: - Clear next_buffer after assigning it to server->bigbuf. A stale next_buffer pointer can lead to a use-after-free on subsequent error paths. - Update pdu_length to the decrypted plaintext size (buf_size). Using the pre-decryption length allows NextCommand to point into stale ciphertext residue. - Reject next_cmd values smaller than MID_HEADER_SIZE(server). - Fix an integer overflow in the upper bound check by verifying pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the trailing slice is large enough for a header. | ||||
| CVE-2026-97908 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev The command and ACL RPMsg endpoints store struct btqcomsmd as their callback private data. The receive callbacks dereference btq->hdev without taking an hci_dev reference. The current teardown order frees the hci_dev before destroying the RPMsg endpoints in both the hci_register_dev() error path and the driver remove path. If WCNSS delivers data in that window, the endpoint callback can run with an already freed hci_dev and pass it to the Bluetooth core. For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears the callback under the channel recv_lock. The receive path holds the same lock while invoking the callback, so destroying the endpoints first both prevents new callbacks and serializes with any callback already running. Destroy the command and ACL endpoints before hci_free_dev(). Keep hci_unregister_dev() first during remove so the HCI core stops issuing operations before the transport endpoints are shut down. In the full registration-error cleanup path, return directly after freeing the hci_dev to avoid falling through to the partial-construction labels and destroying the endpoints twice. | ||||
| CVE-2026-97609 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: prevent UAF during module unload nf_ct_set_timeout() protects the timeout hook dereference and policy lookup with rcu_read_lock(). cttimeout_exit(), however, unregisters the per-net operations before it clears the hook. This allows the following interleaving: CPU 0 CPU 1 cttimeout_exit() nf_ct_set_timeout() unregister_pernet_subsys() rcu_read_lock() kfree(pernet) h = nf_ct_timeout_hook h->timeout_find_get() nfct_timeout_pernet() The hook still points to ctnl_timeout_find_get() when CPU 1 looks up the already freed per-net timeout list. KASAN reported: BUG: KASAN: slab-use-after-free in ctnl_timeout_find_get Read of size 8 by task poc/90 Call Trace: ctnl_timeout_find_get+0x271/0x2a0 [nfnetlink_cttimeout] nf_ct_set_timeout+0x7b/0x3c0 xt_ct_tg_check+0x724/0xb20 xt_check_target+0x234/0xa90 do_ipt_set_ctl+0x570/0x1270 Allocated by task 89: __kmalloc_noprof+0x16e/0x460 ops_init+0x6d/0x420 register_pernet_operations+0x2f6/0x670 Freed by task 91: kfree+0x131/0x390 ops_undo_list+0x3d4/0x730 unregister_pernet_operations+0x232/0x490 unregister_pernet_subsys+0x1c/0x30 cttimeout_exit+0x52/0x970 [nfnetlink_cttimeout] Clear the hook and wait for existing readers before unregistering the per-net operations. This blocks new policy lookups and ensures readers that observed the hook finish before the per-net storage is freed. | ||||
| CVE-2026-97531 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip vport under deletion in report ID acquisition qla24xx_report_id_acquisition() format-1 handling walks ha->vp_list under vport_slock, takes a vref_count on the matching vport and calls qla_update_host_map() to register its port id. A vport teardown via qla24xx_vport_delete() sets VPORT_DELETE, then qla24xx_disable_vp() removes the vport from the host_map btree and zeroes vha->d_id (RESET_AL_PA). The vport is only unlinked from vp_list later, in qla24xx_deallocate_vp_id(), which clears vp_map[idx] (RESET_VP_IDX) but does not touch host_map. In the window in between, report ID acquisition can still find the vport on vp_list and call qla_update_host_map(); with d_id already zeroed it takes the btree_insert32() path and re-inserts the dying vport into host_map. Nothing cleans that entry afterwards, so once scsi_host_put() frees the vha a later host_map lookup dereferences freed memory. Skip a vport that has VPORT_DELETE set before taking the reference, so it is neither re-registered nor scheduled for DPC re-registration. This mirrors the existing guard in qla2x00_alert_all_vps(). | ||||
| CVE-2026-97501 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: paris: bypass pinctrl GPIO layer in set GPIO direction pinctrl_gpio_direction_input() / pinctrl_gpio_direction_output() take the pinctrl mutex. This causes a gpiochip operations to need to sleep. Worse yet, the .can_sleep field in the gpiochip is not set. This causes the shared GPIO proxy to trip over, as it uses gpiod_cansleep() to check whether it can use a spinlock or needs a mutex. In this case, it ends up taking a spinlock, then calls pinctrl_gpio_direction_output(), which takes a mutex. This causes a huge warning. While this class of Mediatek hardware does not have separate clear/set registers, the pinctrl context has a spinlock that is taken whenever a register read-modify-write is done. Also, once the GPIO function is selected / muxed in, further GPIO operations do not involve pinctrl operations or state. The GPIO direction and level values do not require toggling the pinmux or any other pin config options. Switch to directly calling mtk_pinmux_gpio_set_direction() in the GPIO set direction callbacks to avoid taking the pinctrl mutex. Drop the .gpio_set_direction field in mtk_pmxops to signal we are no longer using the pinctrl GPIO layer for setting the direction. | ||||
| CVE-2026-97478 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virt: acrn: Fix irqfd use-after-free during eventfd shutdown acrn_irqfd_deassign() and the eventfd EPOLLHUP wakeup can race and free the same struct hsm_irqfd: CPU0 CPU1 ---- ---- eventfd_release() wake_up_poll(EPOLLHUP) hsm_irqfd_wakeup() queue_work(&irqfd->shutdown) acrn_irqfd_deassign() hsm_irqfd_shutdown() list_del_init() eventfd_ctx_remove_wait_queue() eventfd_ctx_put() kfree(irqfd) hsm_irqfd_shutdown_work() container_of(work, ..., shutdown) irqfd->vm <-- use-after-free The deassign path freed the irqfd while a shutdown work item was already queued by EPOLLHUP (or vice versa), so the work item could resurrect a dangling pointer through container_of(). Switch to the lifetime model used by KVM irqfds: - Deassign/deinit only deactivate the irqfd: remove it from vm->irqfds under irqfds_lock and queue the cleanup work. - hsm_irqfd_shutdown_work() becomes the sole owner that unhooks the eventfd waitqueue entry, drops the eventfd reference and frees the irqfd. - A new HSM_IRQFD_FLAG_SHUTDOWN bit guarded by test_and_set_bit() ensures the cleanup work is queued at most once, no matter how many of {EPOLLHUP, deassign, deinit} fire concurrently. This is safe to call from the waitqueue callback, which runs with wqh->lock held and IRQs disabled and therefore cannot take irqfds_lock. - acrn_irqfd_deassign() flushes vm->irqfd_wq before returning so the eventfd is fully detached on return. acrn_irqfd_deinit() deactivates every irqfd, flushes the workqueue and only then destroys it, so no path can queue_work() onto a torn-down workqueue. - acrn_irqfd_assign() now installs the eventfd waitqueue entry and publishes the irqfd to vm->irqfds under irqfds_lock, so the irqfd is never visible to deassign/deinit before its waitqueue entry is in place, and any EPOLLHUP that fires in the assign window queues cleanup work that blocks on irqfds_lock until publication is done. | ||||
| CVE-2026-93260 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: propagate IPI init errors to prevent use-after-free When xive_init_ipis() fails (e.g. irq_domain_alloc_irqs() fails), the error path frees the global xive_ipis array. However, xive_smp_probe() previously ignored this failure and proceeded to call xive_setup_cpu_ipi(), which dereferences the already-freed xive_ipis pointer -- a use-after-free. Now that xive_smp_probe() returns int (previous patch), propagate the error from xive_init_ipis() and xive_setup_cpu_ipi() through xive_smp_probe(). Check the return value in both pnv_smp_probe() and pSeries_smp_probe() so that IPI setup is aborted cleanly on failure, avoiding the use-after-free. | ||||
| CVE-2026-93251 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: bus: Introduce acpi_bus_get_primary_device() The function used for obtaining the first "physical" device for which the given ACPI one is the ACPI companion, acpi_get_first_physical_node(), may return a stale device pointer (mostly in theory) because acpi_unbind_one() may run as a whole after dropping the ACPI device's physical_node_lock in acpi_get_first_physical_node() and before it returns. The last reference to the "physical" device may be dropped then before the pointer to it is returned to the caller. If that happens and the acpi_get_first_physical_node() caller invokes get_device() on the pointer obtained from it, which is done by the majority of its callers, a use-after-free will occur. To prepare for addressing this problem, introduce a new function for getting the first "physical" device associated with the given ACPI one (the "primary physical device") that will also reference count the device in question before returning a pointer to it. Make that new function and acpi_get_first_physical_node() share the physical node list lookup code. No intentional functional impact. | ||||
| CVE-2026-93205 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Manage teardown with devm arm_smmu_device_remove() manually frees the IOPF queue, destroys the vmid_map and disables the device, while the IRQs and queues are devm managed. devm unwinds only after remove() returns, so the cleanup runs in the wrong order. The IOPF queue is freed before the event-queue IRQ whose handler uses it. Manage all of it with devm so the unwind order is correct. Free the IOPF queue and vmid_map via devm actions, and disable the device from one registered after arm_smmu_device_reset(). This is also a prerequisite for fixing a Tegra241 CMDQV CMD_SYNC use-after-free in the subsequent patch. | ||||
| CVE-2026-93200 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix use-after-free of master->this sysfs attribute callbacks for the master controller device dereference master->this. However, master->this is freed in i3c_master_detach_free_devs() before the master device itself is released. As a result, sysfs accesses can dereference a freed master->this pointer, leading to a use-after-free. Keep master->this alive until i3c_masterdev_release(), which is called after the master device and its sysfs state are being torn down. Do not free master->this as part of the normal device detach path. On the error path in i3c_master_set_info(), reset master->this and bus.cur_master to NULL before freeing the allocated device. | ||||
| CVE-2026-93196 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm: virtio_pmem: refcount requests for token lifetime KASAN reports slab-use-after-free in __wake_up_common(): BUG: KASAN: slab-use-after-free in __wake_up_common+0x114/0x160 Read of size 8 at addr ffff88810fdcb710 by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.19.0-next-20260220-00006-g1eae5f204ec3 #4 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x6d/0xb0 print_report+0x170/0x4e2 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __virt_addr_valid+0x1dc/0x380 kasan_report+0xbc/0xf0 ? __wake_up_common+0x114/0x160 ? __wake_up_common+0x114/0x160 __wake_up_common+0x114/0x160 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 __wake_up+0x36/0x60 virtio_pmem_host_ack+0x11d/0x3b0 ? sched_balance_domains+0x29f/0xb00 ? __pfx_virtio_pmem_host_ack+0x10/0x10 ? _raw_spin_lock_irqsave+0x98/0x100 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 vring_interrupt+0x1c9/0x5e0 ? __pfx_vp_interrupt+0x10/0x10 vp_vring_interrupt+0x87/0x100 ? __pfx_vp_interrupt+0x10/0x10 __handle_irq_event_percpu+0x17f/0x550 ? __pfx__raw_spin_lock+0x10/0x10 handle_irq_event+0xab/0x1c0 handle_fasteoi_irq+0x276/0xae0 __common_interrupt+0x65/0x130 common_interrupt+0x78/0xa0 </IRQ> virtio_pmem_host_ack() wakes a request that has already been freed by the submitter. This happens when the request token is still reachable via the virtqueue, but virtio_pmem_flush() returns and frees it. Fix the token lifetime by refcounting struct virtio_pmem_request. virtio_pmem_flush() holds a submitter reference, and the virtqueue holds an extra reference once the request is queued. The completion path drops the virtqueue reference, and the submitter drops its reference before returning. | ||||
| CVE-2026-93192 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Clear queue->active_job when v3d_fence_create() fails The run_job() callbacks for BIN, RENDER, TFU and CSD assign the incoming job to queue->active_job before calling v3d_fence_create(). If v3d_fence_create() fails, the callback returns NULL without clearing active_job, leaving a dangling pointer. Create a failure path in all run_job() callbacks that clears the active job before returning NULL. The BIN path takes queue->queue_lock around the clear as it races against v3d_overflow_mem_work(); RENDER, TFU and CSD paths have no concurrent reader, so the clear is lock-free. | ||||
| CVE-2026-93176 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dangling pointer in plane reset function amdgpu_dm_plane_drm_plane_reset() frees the old state before allocating a new one. If kzalloc() fails, the function returns without updating the state pointer, leaving a dangling pointer to already freed memory. Fix this by allocating the new state first. On allocation failure, the old state remains untouched and the function safely returns. Found by Linux Verification Center (linuxtesting.org) with SVACE. [adjust for movement around current amd-staging-drm-next] | ||||
| CVE-2026-93175 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dangling pointer in CRTC reset function amdgpu_dm_crtc_reset_state() frees the old state before allocating a new one. If kzalloc() fails, the function returns without updating the state pointer, leaving a dangling pointer to already freed memory. Fix this by allocating the new state first. On allocation failure, the old state remains untouched and the function safely returns. Found by Linux Verification Center (linuxtesting.org) with SVACE. [adjust for movement around current amd-staging-drm-next] | ||||
| CVE-2026-93163 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: core - fix rng list on registration error hwrng_register(rng) does the following: 1. Checks if rng has name and read methods set 2. Checks if the name already exists 3. Adds rng to global rng_list 4. May try to set rng to current_rng If step 4 fails, it returns an error. However, it does not remove the rng from rng_list, causing a dangling reference which can result in use-after-free if the caller frees rng, since registration failed. Add a list_del_init() cleanup step. | ||||