Export limit exceeded: 22277 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 15221 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15221 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80725 | 1 Linux | 1 Linux Kernel | 2026-08-31 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: gro: properly validate BIG TCP aggregation criteria When GRO attempts to aggregate packets beyond GRO_LEGACY_MAX_SIZE (64KB), BIG TCP should only be permitted for plain IPv4 TCP and plain IPv6 TCP (with sufficient MAC header room to insert the temporary HBH jumbo header). However, commit b1a78b9b9886 ("net: add support for ipv4 big tcp") loosened the check in skb_gro_receive(), leading to several issues: 1. skb_gro_receive() checked skb_headroom(p) instead of the actual space before the MAC header (p->mac_header). Because skb_headroom(p) includes mac_len, crafted frames (e.g. injected via AF_PACKET) can pass the check with p->mac_header < 8 bytes. When ipv6_gro_complete() inserts the temporary HBH jumbo header, the memmove() starts before skb->head, causing an out-of-bounds write and wrapping skb->mac_header. 2. It allowed non-IP protocols such as software VLAN (ETH_P_8021Q / ETH_P_8021AD) to aggregate beyond 64KB because p->protocol != ETH_P_IPV6 was true. 3. It checked p->encapsulation instead of NAPI_GRO_CB(skb)->encap_mark, allowing encapsulated flows (e.g. SIT / IPv6-in-IPv4) to aggregate beyond 64KB. Fix skb_gro_receive() to strictly enforce: - NAPI_GRO_CB(skb)->proto == IPPROTO_TCP - Not encapsulated (!NAPI_GRO_CB(skb)->encap_mark && !p->encapsulation) - Protocol must be either ETH_P_IP or ETH_P_IPV6 - If ETH_P_IPV6, p->mac_header must be at least sizeof(struct hop_jumbo_hdr) Returning -E2BIG from skb_gro_receive() ensures that packets which cannot become BIG TCP are cleanly flushed at <= 64KB and delivered intact without dropping. This issue does not exist in mainline (7.0+) because the subsystem was rewritten in commit 81be30c1f5f2 ("net/ipv6: Drop HBH for BIG TCP on RX side"), making this fix relevant only for older stable branches like 6.18.y. | ||||
| CVE-2026-56211 | 2 Aomedia, Redhat | 7 Libaom, Ai Inference Server, Enterprise Linux and 4 more | 2026-08-31 | 7.1 High |
| A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames. | ||||
| CVE-2026-56209 | 2 Aomedia, Redhat | 7 Libaom, Ai Inference Server, Enterprise Linux and 4 more | 2026-08-31 | 7.1 High |
| An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution. | ||||
| CVE-2026-80629 | 1 Linux | 1 Linux Kernel | 2026-08-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: npc: Fix size of entry2cntr_map KASAN prints below splat. This is caused by allocating counter for reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map is not allocated for reserved entries. BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0 Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14 CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1 Hardware name: Marvell CN106XX board (DT) Workqueue: events work_for_cpu_fn Call trace: dump_backtrace.part.0+0xe4/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x88/0xb4 print_report+0x154/0x458 kasan_report+0xb8/0x194 __asan_store2+0x7c/0xa0 npc_map_mcam_entry_and_cntr+0xb0/0x1a0 rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280 npc_install_flow+0x840/0xfe0 rvu_npc_install_cpt_pass2_entry+0x138/0x190 rvu_nix_init+0x148c/0x2880 rvu_probe+0x1800/0x30b0 local_pci_probe+0x78/0xe0 work_for_cpu_fn+0x30/0x50 process_one_work+0x4cc/0x97c worker_thread+0x360/0x630 kthread+0x1a0/0x1b0 ret_from_fork+0x10/0x20 | ||||
| CVE-2026-53016 | 1 Linux | 1 Linux Kernel | 2026-08-31 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. | ||||
| CVE-2026-67271 | 1 Dell | 12 Powerstore 1000t, Powerstore 1200t, Powerstore 3000t and 9 more | 2026-08-31 | 9.8 Critical |
| Dell PowerStore SDNAS, contains an Out-of-bounds Write vulnerability in SMB/CIFS. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service and remote execution. This is a Critical vulnerability as a remote user could send a specially crafted SMB packet and cause a crash, that is persistent in case automatic restarts are enabled. Additionally, a more sophisticated attacker could use the same vulnerability for remote code execution. | ||||
| CVE-2026-80612 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: lwtunnel: Drop skb metadata before LWT encapsulation skb metadata is meant for passing information between XDP and TC. It lives in the skb headroom, immediately before skb->data. LWT programs cannot access the __sk_buff->data_meta pseudo-pointer to metadata. However, LWT encapsulation prepends outer headers, moving skb->data back over the headroom where the metadata sits. On an RX-originated (forwarded) packet that still carries XDP metadata this goes wrong in two different ways, depending on the encap type: 1. Non-BPF LWT encaps (mpls, seg6, ioam6 ...) call skb_push()/skb_pull() and silently overwrite the metadata that sits in the headroom. 2) BPF LWT xmit calls bpf_skb_change_head(), which uses skb_data_move(). That helper expects metadata immediately before skb->data. But since the IP output path runs LWT xmit before neighbour output has built the outgoing L2 header, for forwarded packets skb->data points at the L3 header while skb_mac_header() still points at the old L2 header. skb_data_move() sees metadata ending at skb_mac_header(), not before skb->data, warns and clears metadata: WARNING: CPU: 21 PID: 454557 at include/linux/skbuff.h:4609 skb_data_move+0x47/0x90 CPU: 21 UID: 0 PID: 454557 Comm: napi/iconduit-g Tainted: G O 6.18.21 #1 RIP: 0010:skb_data_move+0x47/0x90 Call Trace: <IRQ> bpf_skb_change_head+0xe6/0x1a0 bpf_prog_...+0x213/0x2e3 run_lwt_bpf.isra.0+0x1d3/0x360 bpf_xmit+0x46/0xe0 lwtunnel_xmit+0xa1/0xf0 ip_finish_output2+0x1e7/0x5e0 ip_output+0x63/0x100 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0x9c/0x150 __napi_poll+0x2b/0x190 net_rx_action+0x40b/0x7f0 handle_softirqs+0xd2/0x270 do_softirq+0x3f/0x60 </IRQ> That is what happens, as for how to fix it - a received packet that carries metadata can reach an encap through any of the three LWT redirect modes: LWTUNNEL_STATE_INPUT_REDIRECT ip6_rcv_finish dst_input lwtunnel_input LWTUNNEL_STATE_OUTPUT_REDIRECT ip6_rcv_finish dst_input ip6_forward ip6_forward_finish dst_output lwtunnel_output LWTUNNEL_STATE_XMIT_REDIRECT ip6_rcv_finish dst_input ip6_forward ip6_forward_finish dst_output ip6_output ip6_finish_output ip6_finish_output2 lwtunnel_xmit Every encap funnels through the three LWT dispatch helpers, so drop the metadata there, right before handing the skb to the encap op. This single chokepoint covers all encap types and all three redirect modes: - lwtunnel_input(): seg6, rpl, ila, seg6_local - lwtunnel_output(): ioam6 - lwtunnel_xmit(): mpls, LWT BPF xmit Alternatively, we could clear the metadata right after TC ingress hook. That would require a compromise, however. Metadata would become inaccessible from TC egress (in setups where it actually reaches the hook it tact, that is without any L2 tunnels on path). | ||||
| CVE-2026-80693 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: idpf: bound interrupt-vector register fill to the allocated array idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding its inner loop only by the per-chunk num_vectors. The array is sized separately: idpf_intr_reg_init() allocates kzalloc_objs(struct idpf_vec_regs, total_vecs) from caps.num_allocated_vectors and only checks the returned count after the fill. The sum of per-chunk num_vectors is never reconciled against total_vecs, so a reply with a small num_allocated_vectors but chunks summing higher writes past the end of reg_vals[]. Impact: a control plane (a PF or hypervisor device model) that returns a VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds num_allocated_vectors writes struct idpf_vec_regs entries past the end of the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write). Bound the fill loop to the array capacity passed in by the callers, mirroring the sibling idpf_vport_get_q_reg(). The existing num_regs < num_vecs check then rejects an undersized reply without the out-of-bounds write happening first. | ||||
| CVE-2026-80706 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: softing: fw_parse(): validate firmware record spans fw_parse() reads a fixed record header, a firmware-provided payload, and a trailing checksum without knowing the end of the firmware blob. A truncated record can therefore make those reads exceed the blob. The same record also supplies addresses and lengths for writes into DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its bounds check, while the application loader does not bound the staging copy at all. Pass the firmware end to the parser and validate the full source record. Use a signed wide offset for generic DPRAM records and validate the application staging span against the mapped DPRAM before copying. | ||||
| CVE-2026-80685 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/util: don't read __page_2 for order-1 folios in snapshot_page() snapshot_page() currently reads __page_2 after checking nr_pages > 1, but it should only do so when nr_pages > 2. If an order-1 folio is allocated at the end of a vmemmap section, __page_2 will not exist and reading it will cause a fault. During DLPAR memory remove on a 22 TB ppc64le LPAR, snapshot_page() oopsed on the page isolation path while reading an order-1 folio's __page_2 from an adjacent absent section (unmapped vmemmap). Fix this to avoid reading memmap that doesn't exist (e.g., a vmemmap hole). | ||||
| CVE-2026-80615 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dst_metadata: fix false-positive memcpy overflow in tun_dst_unclone kmalloc_flex() in metadata_dst_alloc() sets __counted_by for the structure to the options_len, which is then initialized to zero. Later, we're initializing the structure by copying the tunnel info together with the options, and this triggers a warning for a potential memcpy overflow, since the compiler estimates that the options can't fit into the structure, even though the memory for them is actually allocated. memcpy: detected buffer overflow: 104 byte write of buffer size 96 WARNING: CPU: X PID: Y at lib/string_helpers.c:1036 __fortify_report skb_tunnel_info_unclone+0x179/0x190 geneve_xmit+0x7fe/0xe00 The issue is triggered when built with clang and source fortification. Fix that by doing the copy in two stages: first - the main data with the options_len, then the options. This way the correct length should be known at the time of the copy. It would be better if the options_len never changed after allocation, but the allocation code is a little separate from the initialization and it would be awkward and potentially dangerous to return a struct with options_len set to a non-zero value from the metadata_dst_alloc(). Another option would be to use ip_tunnel_info_opts_set(), but it is doing too many unnecessary operations for the use case here. | ||||
| CVE-2026-78008 | 1 Watchguard | 1 Fireware Os | 2026-08-29 | N/A |
| A buffer overflow vulnerability in the WatchGuard Fireware OS Management Web UI allows an authenticated administrator with network access to cause a denial of service (DoS) condition or potentially execute arbitrary code by sending specially crafted network traffic. | ||||
| CVE-2026-68513 | 2026-08-28 | 7.1 High | ||
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions 3.3.0 through 3.3.12 and 3.4.0 through 3.4.13 contain a heap buffer overflow in PyOpenEXR triggered by a channel-name key collision between literal and prefixed RGB channels. When separate_channels=false, PyOpenEXR maps each physical channel name through channelNameToRGBA() and coalesces the results into a shared RGB array. A crafted flat scanline EXR that contains both a literal channel such as left and prefixed channels such as left.R, left.G, and left.B causes these names to collide, so the wrapper reuses an undersized two-dimensional NumPy array for the coalesced RGB slices and writes out of bounds when OpenEXR.File(path) decodes the pixels. This issue is fixed in versions 3.3.13 and 3.4.14. | ||||
| CVE-2026-9805 | 1 Insyde | 1 Insydeh2o | 2026-08-28 | 2.7 Low |
| SMM IHISI command handler, FMTSWriteUseIntelLib, for FMTS command 0x32, read and write data without checking buffer size and could cause buffer overflow. | ||||
| CVE-2026-58106 | 1 Ericsson | 1 Codechecker | 2026-08-28 | N/A |
| CVE-2025-40843 https://github.com/advisories/GHSA-5xf2-f6ch-6p8r was fixed by replacing unchecked strcpy() with a bounded safe_strcpy() helper. At ldlogger-tool-gcc.c:129 the destination passed to that helper is fullPath + 2, but the size passed down is the full PATH_MAX. safe_strcpy() is strncpy(), which NUL-pads the destination out to the whole n, so this site writes 4096 bytes into the 4094 that remain — a 2-byte stack overflow on every invocation, independent of the input path's length. This issue affects CodeChecker: through 6.28.2. | ||||
| CVE-2026-18393 | 3 Ffmpeg, Red Hat, Redhat | 4 Ffmpeg, Red Hat Openshift Ai (rhoai), Enterprise Linux Ai and 1 more | 2026-08-28 | 5.4 Medium |
| A flaw was found in FFmpeg. The tdsc_load_cursor() function writes beyond the bounds of a heap-allocated buffer when processing crafted TDSC cursor data. A remote attacker could exploit this by supplying a specially crafted video file, potentially leading to a denial of service or arbitrary code execution. | ||||
| CVE-2026-13086 | 1 Watchguard | 1 Fireware Os | 2026-08-28 | N/A |
| A stack-based buffer overflow in the epm (Endpoint Protection Manager) service used by the deprecated Mobile Security feature in WatchGuard Fireware OS allows an unauthenticated remote attacker to execute arbitrary code. | ||||
| CVE-2026-52492 | 1 Libtiff | 1 Libtiff | 2026-08-28 | 7.8 High |
| An integer overflow in the libtiff rgb2ycbcr utility's cvtRaster() function when computing strip buffer sizes can result in an undersized heap allocation and subsequent heap-based buffer overflow during YCbCr conversion of a crafted TIFF image | ||||
| CVE-2026-20097 | 1 Cisco | 1 Unified Computing System | 2026-08-28 | 6.5 Medium |
| A vulnerability in the web-based management interface of Cisco IMC could allow an authenticated, remote attacker with admin-level privileges to execute arbitrary code as the root user. This vulnerability is due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system as the root user. Cisco has assigned this vulnerability a SIR of High rather than Medium as the score indicates because additional security implications could occur when the attacker becomes root. | ||||
| CVE-2026-78011 | 1 Watchguard | 1 Fireware Os | 2026-08-28 | N/A |
| An integer underflow vulnerability in the WatchGuard Fireware OS iked process allows a remote unauthenticated attacker to create a Denial of Service (DoS) condition in VPN processing by sending specially crafted network traffic. | ||||