Export limit exceeded: 430517 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (430517 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99608 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Guard the playback copy usx2y_urb_play_prepare() sums the packet lengths of a whole URB, copies that many frames with a single wrap, and sizes each playback packet from the capture packet's actual_length. Three things are unchecked: that the URB fits in the ring buffer, that a packet fits in the playback endpoint's maxpacksize, from which tmpbuf is allocated, and that actual_length is a whole number of frames. The ISO descriptors take the raw actual_length while transfer_buffer_length and the copies take count * stride, so a packet that is not a multiple of the stride makes the descriptors add up to more than the buffer, by up to stride - 1 bytes per packet. Return -EPIPE, as the existing packet-size check does, when the URB is larger than the buffer or a packet is larger than maxpacksize, and size each descriptor from whole frames, so the descriptors add up to transfer_buffer_length and each stays within maxpacksize. The buffer case is prevented by the previous patch and this is the guard for it; the other two depend only on the device. The first case is reachable on the unpatched driver with ordinary packets: on 7.3-rc7, a USB/IP device presenting the US-122 interface layout and sending 48-frame packets, with a 100-frame playback buffer (two 50-frame periods, inside the stock constraints), KASAN reports: BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x79b/0x1ac0 Read of size 18446744073709551280 at addr ffff88800e6b02e0 by task vhci_rx/80 With both patches, the same device and a 200-frame playback buffer is refused at hw_params with EINVAL, and a 400-frame buffer plays for 30 s with the position advancing inside the buffer, no KASAN report and neither guard message. The maxpacksize check is not exercised: the emulated device reports the same wMaxPacketSize on both endpoints. The descriptor case is visible with capture packets of 195 bytes at stride 4 (48 frames and 3 bytes): without this change the four descriptors add up to 780 bytes for 768 bytes of data, and USB/IP's completion check refuses the URB ("total length of iso packets 780 not equal to actual length of buffer 768", -EPROTO), after which the driver stops the streams. With this patch every descriptor is 192 bytes, the descriptors add up to the data in every URB for 30 s, the position advances inside the buffer and KASAN reports nothing. The 48-frame playback run above is unchanged. | ||||
| CVE-2026-99615 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 3.4 Low |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: only return sessions of the given tunnel in l2tp_session_get() Commit 5f77c18ea556 ("l2tp: use IDR for all session lookups") made pppol2tp_connect() and the netlink session commands find sessions with l2tp_session_get(), passing the socket of the tunnel they name. L2TPv3 session IDs are unique per network namespace, except that sessions carried over UDP are only unique per UDP socket, the socket of their tunnel. However, l2tp_v3_session_get() only checks the socket when another session has the same session ID. Otherwise it returns the session, whichever tunnel it belongs to. As of now, a session command that names the wrong tunnel acts on a session of another tunnel, and a PPPoL2TP socket for a second L2TPv3 tunnel fails with EEXIST, because it finds session 0 of the first tunnel. The issue can be reproduced with: ip l2tp add tunnel tunnel_id 3 peer_tunnel_id 3 encap udp \ local 127.0.0.1 remote 127.0.0.1 udp_sport 5003 udp_dport 6003 ip l2tp add tunnel tunnel_id 4 peer_tunnel_id 4 encap udp \ local 127.0.0.1 remote 127.0.0.1 udp_sport 5004 udp_dport 6004 ip l2tp add session tunnel_id 3 session_id 7 peer_session_id 7 ip l2tp del session tunnel_id 4 session_id 7 ip l2tp show session Before that commit, the delete fails with "No such device", and session 7 of tunnel 3 is still listed. After that commit, the delete succeeds, and session 7 of tunnel 3 is gone. This patch will make l2tp_session_get() return NULL when the L2TPv3 session it finds does not belong to the given socket. The receive path calls l2tp_v3_session_get() directly and is not changed. | ||||
| CVE-2026-99666 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix PMD table lock leak in try_collapse_pte_mapped_thp() For a private mapping with userfaultfd, try_collapse_pte_mapped_thp() takes the PMD table lock before it maps the page table for the second time. If that (pte_offset_map_rw_nolock) fails, because the page table vanished in the meantime due to concurrent page table reclaim, it leaves through the abort label, where the PMD table lock is unlocked if it differs from PTE table lock. In case the PMD table lock and the PTE table lock match, which is the case without CONFIG_SPLIT_PTE_PTLOCKS after pte_offset_map_rw_nolock() failed, we miss to unlock the PMD table. To fix it, forget the PTE table lock when we unmap+unlock the PTE table. Fix generated by an LLM and sent by Josef Bacik in private. [ david: move the ptl = NULL handling; rewrite description, drop wrong comments ] | ||||
| CVE-2026-99671 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: raw, isotp: copy socket options outside of lock_sock() The CAN_RAW and CAN_ISOTP specific socket options are copied from and to user space while holding lock_sock(). A copy that faults or stalls, e.g. on a userfaultfd or FUSE backed mapping, holds lock_sock() for its whole duration. raw_notify() and isotp_notify() take lock_sock() of a socket that is bound to the vanishing device while holding RTNL. As the CAN_RAW options can also be changed on a bound socket, a stalled copy can block RTNL on an unregistration or namespace change of the bound device. Before "can: protect the receive lists with a per-device lock", raw_setsockopt() even held RTNL itself during the copy. CAN_ISOTP only copies its options for unbound sockets, which isotp_notify() skips without taking lock_sock(). Keep the user space copies out of the locked sections: Check the option name and length and copy the option values, including the CAN_RAW_FILTER filters, to kernel memory before lock_sock(). raw_setsockopt_locked() and isotp_setsockopt_locked() get the copied values directly and drop their now redundant length checks and copies. As a side effect, a failing copy can not leave partially overwritten options behind anymore. In raw_getsockopt() duplicate the filters under lock_sock() and copy them to user space after release_sock(). As the option name and length are now checked before lock_sock(), the order of the checks in isotp_setsockopt() and accordingly the order of the returned error values changes. This is in line with POSIX, which does not define an order in which multiple error conditions are detected and reported. The generic SOL_SOCKET options in sk_setsockopt() are not affected by this patch. | ||||
| CVE-2026-79655 | 2 Red Hat, Redhat | 9 Enterprise Linux, Enterprise Linux, Enterprise Linux Eus and 6 more | 2026-11-20 | 7.8 High |
| A flaw was found in sos clean, a utility within the sos package. This vulnerability allows a local attacker to perform arbitrary file creation or overwrite. By crafting a malicious tar archive, an attacker can exploit a path traversal issue during tar extraction, where symlink and hardlink targets are not properly validated. This enables the attacker to write files to arbitrary locations on the system with the privileges of the sos clean process, which often runs as root. | ||||
| CVE-2026-133228 | 2 Red Hat, Redhat | 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more | 2026-11-20 | 6.8 Medium |
| A flaw was found in Keycloak. When a client application enforces step-up authentication or multi-factor authentication (MFA) via a minimum authentication level, Keycloak fails to apply this requirement to login sessions initiated through the credential reset endpoint. An attacker who possesses a user's initial credentials (such as a password) can navigate from the reset interface back to the standard login form and authenticate without completing the required second factor. This flaw allows an attacker to obtain valid access tokens and gain unauthorized access to protected services without satisfying mandatory security controls. | ||||
| CVE-2026-133553 | 2 Red Hat, Redhat | 6 Enterprise Linux, Enterprise Linux, Hardened Images and 3 more | 2026-11-20 | 7.8 High |
| A flaw was found in crun. When copying files onto a tmpfs mounted with tmpcopyup, crun opens the destination a second time by name. A container that shares a writable volume with the container being created can change that path between the two lookups, so crun copies image files onto host files, including files under /proc/sys. | ||||
| CVE-2026-133487 | 1 Nodejs | 1 Undici | 2026-11-20 | 6.3 Medium |
| A security flaw has been discovered in nodejs undici up to 7.24.0. This affects the function Object.assign of the file balanced-pool.js of the component BalancedPool. The manipulation results in improperly controlled modification of object prototype attributes. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 7.24.1 is able to mitigate this issue. The patch is identified as 0d7ec33ff37563d3e7c98d11d7bca736f330d156. You should upgrade the affected component. | ||||
| CVE-2026-99566 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: assoc_array: keep gc's cleanup out of the live tree on allocation failure assoc_array_gc() builds a copy of the tree. Where the copy reaches a shortcut, it allocates the copy of the shortcut with kmalloc_flex(), fills it with memcpy(), links it into the new tree, and only then allocates the copy of the node after it. The memcpy() leaves the new shortcut's next_node pointing at the old tree's node, so if that second allocation fails, the cleanup, assoc_array_destroy_subtree() on the new tree, follows the new shortcut into the old tree, and the BUG_ON() on the old node's back pointer fires. Allocate the node first, and the shortcut once the node exists, freeing the node again if the shortcut cannot be allocated. A copied shortcut is then only linked into the new tree when the copy of its node is there to follow it. Nothing else changes: with no allocation failing, the trees gc builds are the same as before. Found by a userspace test that makes each allocation of each operation fail in turn. | ||||
| CVE-2026-99567 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: assoc_array: don't chain a new shortcut onto an existing one When a full node's leaves and the new key all share the node's segment, assoc_array_insert_into_terminal_node() replaces the node with a shortcut to a pair of new nodes. If the node is itself the target of a shortcut, the new shortcut is installed as that shortcut's next node, and a shortcut leading to a shortcut is something nothing expects: assoc_array_walk() indexes the second one as a node, and assoc_array_apply_edit() hits the BUG_ON() in the loop that adjusts nr_leaves_on_branch, on that same insertion. Deletion gets a node there. When the subtree below a shortcut shrinks enough, assoc_array_delete() collapses it into one node below the shortcut, and the leaves it collects can all share that node's segment. The next key that shares it too takes this path. Eighteen insertions and a deletion are enough: sixteen keys that agree on bits 0-11, one that leaves them at bit 8 and is deleted again, and one more that agrees with the sixteen. Have the new shortcut replace the one in front of the node as well. assoc_array_insert_shortcut() gives it that shortcut's back pointer and parent slot, so the caller installs it where that one was, and excises the old shortcut along with the node, which takes a second entry in excised_meta[]. The new shortcut's index key comes from the new key up to the new skip level, so it covers what the old one did. Found by a userspace test doing random insertions and deletions on keys that share long prefixes; a targeted case builds a shortcut, deletes down to the collapse and inserts one more key. | ||||
| CVE-2026-99568 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd/iova_bitmap: Ensure that iova_bitmap_set() handles the full IOVA Generally userspace is going to step the dirty bitmap through the IOVA space. However if the bitmap ends in the middle of a large PTE this is problematic. The first step will clear the dirty bit and report dirty to the end of its bitmap while the second step will see the clear'd dirty and report clean for the start of the bitmap. If it happens this ends up losing dirties. Further this function is missing bounds checking so if this does happen ther is a good chance it will write memory beyond what the userspace was expecting. Return an error code if this illegal condition happens. | ||||
| CVE-2026-99569 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 3.6 Low |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: release a removed xattr node in roll-forward recovery When xattrs shrink enough to fit in the inline xattr area, write_all_xattrs() truncates the xattr node and clears i_xattr_nid. If the file is then fsynced without a checkpoint, only the inode block is written, with i_xattr_nid of 0. Roll-forward recovery starts from the checkpointed inode, whose i_xattr_nid still points to the old xattr node. f2fs_recover_inline_xattr() copies only the inline xattr area, and f2fs_update_inode() writes the old i_xattr_nid back. So the inode keeps the stale xattr node: - The node block is never released, and fsck reports "nonzero bytes in xattr space after end of list". - If the inline xattr list ends exactly at the end of the inline area, its terminator is read from the stale node, and the removed xattrs come back after recovery. When the fsynced inode has no xattr node but the checkpointed one has, release the old xattr node as truncate_node() does: check its block address, invalidate the block and drop its node cache, which may still be dirty. | ||||
| CVE-2026-99572 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential reference count leak in do_garbage_collect() In do_garbage_collect(), we have reserved reference counts on summary cache of all segments, once gc_thread encounter freezing, we need to release all reference counts. | ||||
| CVE-2026-99573 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Stop the target vcpu when disabling LPIs Disabling LPIs is pretty nasty, as it directly messes with the AP list of the affected CPU, which could be running... This has the potential to lead to really bad behaviours, and we should not be doing that. Take example on the way the Active state is handled and simply pause the the vcpu so that we are sure it is in a quiescent state, and the state be safely manipulated. Nobody has any expectation of performance for this anyway. | ||||
| CVE-2026-99574 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: bound the SIT/NAT bitmaps by the checkpoint pack sit_ver_bitmap_bytesize and nat_ver_bitmap_bytesize are used as memcpy lengths into and out of sbi->ckpt, which is sized from cp_payload alone, and nothing compares either length against that allocation. sanity_check_ckpt() has checked these two fields since c77ec61ca0a4, which added them after a crafted image overran build_sit_info(). That check ties each length to a segment count; it never compares either against the allocation, which is the half this adds. Mounting over-reads in build_sit_info() and build_node_manager(), and the first checkpoint writes the same lengths back through the same pointers, so the over-read's contents reach the on-disk checkpoint. An unmount is enough; the filesystem does not have to be used. Bound both ends the way __bitmap_ptr() lays them out. The three branches differ, so a single sum of the two lengths would still admit a small overflow when cp_payload is non-zero. | ||||
| CVE-2026-99575 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: return -EIO for a lost inode block after cp_error After cp_error, dirty node caches are dropped without being written. If such an inode was never written, its NAT entry is still NEW_ADDR, and reading its inode block returns -ENOENT. f2fs_get_dnode_of_data() passes that -ENOENT up, and callers take it as a hole. Since the inode block is missing, the next offset can only advance one block, so fiemap walks block by block up to maxbytes, about 2^30 blocks, while holding the inode lock. It took hours in a power-off recovery test after shutdown and blocked unlink and umount on the file. Return -EIO instead of -ENOENT when the inode block itself is missing after cp_error or shutdown. A missing direct or indirect node is still reported as -ENOENT. | ||||
| CVE-2026-99576 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: zone: fix to avoid bio split on sequential zone In the block layer, bio_split_to_limits() splits a bio if it exceeds any underlying queue limits: 1. queue_max_sectors: Splits bios larger than the transfer limit. This limit is set by the device driver/DMA controller (max_hw_sectors) and device-mapper targets. When flushing dirty pages (governed by VFS writeback_chunk_size() and f2fs nr_pages_to_skip()), f2fs merges contiguous pages into bios up to 512KB (1024 sectors) or more without checking queue_max_sectors, which will be split if the device or DM target enforces a smaller limit. 2. queue_max_segments: Splits bios exceeding scatter-gather segment limits. f2fs allocates bios with up to 256 pages, exceeding the 128-segment limit of DM targets (dm-default-key/dm-crypt) if pages are discontiguous. 3. chunk_sectors: Splits bios crossing chunk/zone boundaries. In f2fs, section_size strictly matches zone_size, and block allocation never spans across section boundaries, so bios never cross chunk_sectors. Crucially, when bio_split_to_limits() splits a bio, bio_submit_split() submits the tail half via submit_bio_noacct() before returning the head half to the caller. On a sequential zoned device, this causes the tail bio to arrive at the zone write plug before the head: dm-3: zone 7: prepare_bio wp mismatch: bio sector 30720 offset 2048 != wp_offset 248, len 248 The write plug rejects the out-of-order tail with BLK_STS_IOERR, causing f2fs_stop_checkpoint() and remounting the filesystem read-only: 2026-09-30T22:09:23.725678+08:00 localhost kernel: CPU: 9 UID: 0 PID: 243 Comm: kworker/9:1H Not tainted 6.12.81-gb3ef518fb26d #5 2026-09-30T22:09:23.725750+08:00 localhost kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 2026-09-30T22:09:23.725753+08:00 localhost kernel: Workqueue: dm-3_zwplugs blk_zone_wplug_bio_work 2026-09-30T22:09:23.725756+08:00 localhost kernel: Call Trace: 2026-09-30T22:09:23.725758+08:00 localhost kernel: <TASK> 2026-09-30T22:09:23.725758+08:00 localhost kernel: dump_stack_lvl+0x4d/0x70 2026-09-30T22:09:23.725759+08:00 localhost kernel: f2fs_stop_checkpoint+0x1df/0x5d0 2026-09-30T22:09:23.725759+08:00 localhost kernel: ? blk_zone_wplug_bio_work+0x4eb/0x740 2026-09-30T22:09:23.725760+08:00 localhost kernel: f2fs_cache_write_end_io+0x545/0x6e0 2026-09-30T22:09:23.725761+08:00 localhost kernel: blk_zone_wplug_bio_work+0x4eb/0x740 2026-09-30T22:09:23.725762+08:00 localhost kernel: process_one_work+0x5c6/0xde0 2026-09-30T22:09:23.725764+08:00 localhost kernel: ? assign_work+0x124/0x4e0 2026-09-30T22:09:23.725765+08:00 localhost kernel: worker_thread+0x403/0xb70 2026-09-30T22:09:23.725765+08:00 localhost kernel: ? __kthread_parkme+0x82/0x140 2026-09-30T22:09:23.725766+08:00 localhost kernel: ? __pfx_worker_thread+0x10/0x10 2026-09-30T22:09:23.725766+08:00 localhost kernel: kthread+0x235/0x2e0 2026-09-30T22:09:23.725767+08:00 localhost kernel: ? recalc_sigpending+0x128/0x1d0 2026-09-30T22:09:23.725767+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10 2026-09-30T22:09:23.725769+08:00 localhost kernel: ret_from_fork+0x2f/0x70 2026-09-30T22:09:23.725769+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10 2026-09-30T22:09:23.725770+08:00 localhost kernel: ret_from_fork_asm+0x1a/0x30 2026-09-30T22:09:23.725771+08:00 localhost kernel: </TASK> 2026-09-30T22:09:23.725771+08:00 localhost kernel: F2FS-fs (dm-0): Stopped filesystem due to reason: 3 To prevent write bios destined for sequential zones from being split: 1. In __bio_alloc(), bound npages to bdev_max_segments(bdev) for writes to sequential zone areas. 2. In page_is_mergeable(), check queue_max_segments() and queue_max_sectors() for sequential zone areas, so f2fs will not merge beyond the queue limits. | ||||
| CVE-2026-99577 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: bound what the driver feeds the after-DTIM queue Frames routed to the high queue are transmitted right after DTIM beacons only, inside the ATIM window, while they wait in the shared TX page pool. The driver puts no limit on how many it hands over, so as long as one station dozes, any sustained broadcast or multicast traffic outruns the drain and empties the pool: measured on an RTL8822BU AP with a single client in power save and ~40 frames/s of mDNS chatter, the free page count at 0x240 goes from 1803 to 16 in about 100 seconds and stays there for as long as the traffic lasts. From that point every other transmit queues behind the backlog, authentication responses arrive too late for anyone to join, and the reserved page download fails ("error beacon valid"). The AP keeps beaconing and only a reboot recovers. Feed the high queue through a small budget that refills below the measured drain rate (about 3 frames per DTIM, ~15/s at dtim_period 2 on the default 2 TU ATIM window); whatever exceeds the budget leaves on its access category queue right away. The high queue backlog is now bounded by the burst size under any load, so the page pool cannot run dry, at the price that a dozing station may miss part of a broadcast storm. | ||||
| CVE-2026-99578 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery In AP mode every broadcast and multicast data frame is routed to TX_DESC_QSEL_HIGH, the after-DTIM queue, whether or not anybody is asleep. The firmware drains that queue at beacon pace, a dozen or so frames per second measured on RTL8822BU, while one associated client's mDNS/SSDP chatter alone exceeds that. The excess accumulates inside the chip until the shared TX page pool is exhausted (measured: 14 of 1803 pages left). From that point every host-sourced frame queues behind the backlog: authentication responses reach the air seconds after the client has given up, so no station can associate anymore, and the beacon reserved-page download fails the BCN_VALID poll ("error beacon valid") because it needs pages from the same pool. The AP keeps beaconing, so the failure looks like a silent RX stall and only a reboot recovers. mac80211 already decides when after-DTIM delivery is needed: it sets IEEE80211_TX_CTL_SEND_AFTER_DTIM on bmc frames only while at least one station is actually dozing. Honor that instead of routing unconditionally: flagged frames keep going through the high queue with the MORE_DATA and HGQMD handling introduced by commit 076f786a0ae1 ("wifi: rtw88: Fix AP mode incorrect DTIM behavior"), everything else leaves at line rate through the AC queues. This partially reverts the usb.c hunk of that commit, whose unconditional routing is what lets the backlog build up. On a bench AP (USB2, 20 MHz, WPA2, hostapd, a Windows client driven through disconnect/reconnect cycles): reconnects fail 0/5 on RTL8822BU and 0/3 on RTL8821CU before this change, and pass 10/10 and 5/5 with it, with the page pool staying healthy and no beacon errors logged. | ||||
| CVE-2026-99579 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: mm/shmem: honour F_SEAL_EXEC when an ACL is set The owner of a memfd sealed with F_SEAL_EXEC can still change its execute bits by setting a POSIX access ACL. With CONFIG_TMPFS_POSIX_ACL, this lets an unprivileged owner make a non-executable memfd executable, bypassing vm.memfd_noexec=2. simple_set_acl() updates i_mode directly, bypassing the seal check in shmem_setattr(). Add shmem_set_acl() to check the resulting mode. Share the F_SEAL_EXEC check with shmem_setattr() using memfd_check_seals_mode() in include/linux/memfd.h. Fix generated by an LLM and sent by Chris Mason in private. [ david: use common helper; simplify description ] | ||||