Export limit exceeded: 55228 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (55228 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74466 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used. | ||||
| CVE-2026-74417 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix integer overflow in radeon_align_pitch() radeon_align_pitch() has the same kind of overflow issue as the old amdgpu helper: both the alignment round-up add and the final 'aligned * cpp' calculation can overflow signed int. If that wraps, radeon_mode_dumb_create() can end up returning an invalid pitch or creating a zero-sized dumb buffer. Fix this by using check_add_overflow() for the alignment round-up and check_mul_overflow() for the final pitch calculation, returning 0 on overflow. Also reject zero pitch and size in radeon_mode_dumb_create(). Found via AST-based call-graph analysis using sqry. | ||||
| CVE-2026-74391 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Bound synthetic-field strings with seq_buf The synthetic field helpers build a prefixed synthetic variable name and a generated hist command in fixed MAX_FILTER_STR_VAL buffers. The current code appends those strings with raw strcat(), so long key lists, field names, or saved filters can run past the end of the staging buffers. Build both strings with seq_buf and propagate -E2BIG if either the synthetic variable name or the generated command exceeds MAX_FILTER_STR_VAL. This keeps the existing tracing-side limit while using the helper intended for bounded command construction. [ sdr: Moved struct seq_buf *s for upside-down x-mas tree formatting ] | ||||
| CVE-2026-74350 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-74341 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix heap overflow from oversized firmware HAL response The firmware response dispatcher copies all synchronous HAL responses into the 4096-byte hal_buf without validating the response length. A response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow with firmware-controlled content. Add a bounds check on the response length. | ||||
| CVE-2026-74291 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: topology: Check PCM and DAI name strings before use Topology objects store several PCM and DAI names in fixed-size UAPI arrays. Other topology parser paths validate these fields with bounded strnlen() checks before using them as C strings, but the PCM and DAI paths still pass some fixed-size arrays directly to strlen(), devm_kstrdup(), DAI lookup, and diagnostic prints. A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream capability name can therefore make the parser read past the end of the fixed-size field. Reject unterminated PCM and DAI name fields before consuming them as C strings. | ||||
| CVE-2026-74269 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | ||||
| CVE-2026-72488 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: soundwire: fix bug in sdw_add_element_group_count found by syzkaller The original implementation caused an out-of-bounds memory access in the sdw_add_element_group_count for-loop when i == num. for (i = 0; i <= num; i++) { if (rate == group->rates[i] && lane == group->lanes[i]) ... To fix this error, the function now checks for existing rate/lane entries in the group(a function parameter) using a for-loop before adding them. No functional changes apart from this fix. | ||||
| CVE-2026-72470 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: resize log->one_page_buf when adopting on-disk page size log_replay() allocates log->one_page_buf using the page size that was chosen from the host PAGE_SIZE: log->one_page_buf = kmalloc(log->page_size, GFP_NOFS); Later, when a restart area is found, the log page size recorded on disk is adopted: t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size); if (log->page_size != t32) { log->l_size = log->orig_file_size; log->page_size = norm_file_page(t32, &log->l_size, t32 == DefaultLogPageSize); } If the on-disk page size is larger than the size used for the initial allocation, log->page_size grows but one_page_buf is left at its original, smaller size. A subsequent unaligned read_log_page() then reads log->page_size bytes into the undersized scratch buffer: page_buf = page_off ? log->one_page_buf : *buffer; err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf, log->page_size, NULL, &log->read_ahead); overflowing the allocation. This is reachable when mounting a dirty NTFS volume whose log was formatted with a page size larger than the buffer initially allocated on the mounting host (for example a 64K-log volume mounted on a host that allocated a 4K scratch buffer). Grow one_page_buf when the adopted on-disk page size exceeds the size used for the initial allocation. On krealloc() failure the original buffer is left intact and freed by the existing error path. | ||||
| CVE-2026-72382 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject undersized DACLs before parsing ACEs parse_dacl() limits the attacker-controlled ACE count by comparing it with the number of minimal ACEs that fit in the DACL size. The DACL size field is 16 bits, but the expression subtracts sizeof(struct smb_acl). Because sizeof() is unsigned, a DACL size smaller than the ACL header underflows to a large size_t. A malicious client can reach this with: SMB2_SET_INFO (InfoType=SMB2_O_INFO_SECURITY) -> smb2_set_info_sec() -> set_info_sec() -> parse_sec_desc() -> parse_dacl() -> init_acl_state(..., 0xffff) -> init_acl_state(..., 0xffff) -> kmalloc_objs(..., 0xffff) Thus a malformed security descriptor can make num_aces pass the guard and drive large temporary ACL state and pointer-array allocations. Reject DACLs smaller than struct smb_acl before doing the subtraction, so the ACE count check cannot be bypassed by the underflow. | ||||
| CVE-2026-72320 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_lookup: fix catchall element handling with inverted lookups nft_lookup_eval() decides whether a lookup matched (`found`) from the direct set lookup and priv->invert before falling back to the catchall element used by interval sets (e.g. nft_set_rbtree) for the open-ended default range. Since `found` is never recomputed after `ext` is replaced by the catchall lookup, inverted lookups (NFT_LOOKUP_F_INV, "!= @set") can wrongly match or wrongly skip the catchall element, producing the wrong verdict. Fold the catchall lookup into `ext` before computing `found`, matching the order already used by nft_objref_map_eval(). | ||||
| CVE-2026-72213 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb cgroup rsvd charge/uncharge mismatch In alloc_hugetlb_folio(), a single h_cg pointer is used for both the rsvd and non-rsvd hugetlb cgroup charges. When map_chg is set, hugetlb_cgroup_charge_cgroup_rsvd() stores the charged cgroup in h_cg, but the immediately following hugetlb_cgroup_charge_cgroup() overwrites h_cg with the non-rsvd cgroup pointer. As a result, hugetlb_cgroup_commit_charge_rsvd() stores the wrong (non-rsvd) cgroup pointer into the folio's rsvd slot. When the folio is later freed, free_huge_folio() unconditionally calls both hugetlb_cgroup_uncharge_folio() and hugetlb_cgroup_uncharge_folio_rsvd(). The rsvd uncharge reads back the wrong cgroup from the folio and decrements a counter that was never charged for that cgroup, causing a page_counter underflow: page_counter underflow: -512 nr_pages=512 WARNING: mm/page_counter.c:61 at page_counter_cancel Fix this by introducing a separate h_cg_rsvd pointer exclusively for the rsvd charge path, keeping the rsvd and non-rsvd charges fully independent through their charge, commit, and error uncharge paths. | ||||
| CVE-2026-72200 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: detect mapping-pairs LCN accumulator overflow The NTFS mapping-pairs parser accumulates relative LCN deltas in a signed integer. A corrupted attribute can drive that addition past the representable range. One corrupt runlist shape sets the accumulated LCN to S64_MAX and then adds a delta of 1 in the next mapping-pairs entry. Signed overflow is undefined and can turn an invalid runlist into a different set of physical clusters. Check the LCN addition for overflow before storing the next run. | ||||
| CVE-2026-72130 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: reject short AUTH_RECEIVE buffers nvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length after checking only that it is nonzero and matches the transfer length. In the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF initiator reach the fixed-size DH-HMAC-CHAP response builders with a kmalloc() buffer shorter than the response, so nvmet_auth_success1() and nvmet_auth_failure1() write past the allocation; both only WARN_ON the short length and then format the message anyway. Impact: A remote NVMe-oF initiator with access to an auth-enabled target can trigger a 16-byte heap out-of-bounds write via a one-byte AUTH_RECEIVE allocation length. Compute the minimum response length for the current DH-HMAC-CHAP step in nvmet_auth_receive_data_len() and report a zero data length when the host-supplied allocation length is shorter, so the existing zero-length check in nvmet_execute_auth_receive() rejects the command before any builder runs. The SUCCESS1 minimum is sizeof(struct nvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the response hash is written into the rval[] flexible-array tail, so the minimum is state dependent rather than a flat sizeof. CHALLENGE keeps its existing variable-length guard in nvmet_auth_challenge(). This is reachable only when in-band DH-HMAC-CHAP authentication is configured on the target. | ||||
| CVE-2026-72106 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-ioctl: fix a possible overflow in list_version_get_info sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the output buffer - info->vers->version[0], info->vers->version[1], info->vers->version[2] and info->vers->next. This can cause buffer overflow. Fix this buffer overflow by replacing "sizeof(tt->version)" with "sizeof(struct dm_target_versions)". | ||||
| CVE-2026-68471 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ieee80211: validate MLE common info length ieee80211_mle_common_size() uses the first common-info octet as the common information length for all known MLE types. However, ieee80211_mle_size_ok() only validates that octet for Basic, Probe Request, and TDLS MLEs. Reconfiguration MLEs also skipped the length octet when calculating the minimum common size, and Priority Access MLEs skipped validation of the advertised common information length. Account for the Reconfiguration common-info length octet and validate the advertised common information length for all known MLE types. Keep unknown-type handling unchanged. [remove now misleading comment] | ||||
| CVE-2026-68453 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix buffer over-read in cca_cipher2protkey Add validation of both the actual key buffer size and token length fields in all the cca_check_sec*token() functions. Additionally check in cca_gencipherkey() for possible underflow with returned key size. The CCA token structures contain user-controlled len fields that were used in operations without proper validation against both the actual buffer size and minimum token structure size. An attacker could set this field larger than the actual buffer size, leading to reading beyond buffer boundaries. This may result in a kernel crash or exposure of memory via sending this as part of a request down to the crypto card. Also an attacker could have used a very small len value and thus enforce a buffer under-run which may produce similar effects as a over-read. So now a key must - key buf length must be at least sizeof the token struct - the key len field inside the token must fit into the range of sizeof key token struct ... key buf length | ||||
| CVE-2026-68445 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Prevent shader BO mappings from becoming writable vc4_gem_object_mmap() rejects a writable mapping of a validated shader BO, but leaves VM_MAYWRITE set. Userspace can map the BO read-only and then turn it writable with mprotect(). Validated shader BOs must stay read-only: the validator checks the instructions once and the GPU trusts them afterwards. A writable mapping lets userspace rewrite the code after validation, bypassing the validator. Clear VM_MAYWRITE on the read-only path so the mapping cannot be upgraded, as i915 already does for its read-only objects. | ||||
| CVE-2026-68293 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix MCIA register buffer overflow on 32 dword reads The MCIA register can return up to 32 dwords (128 bytes) when the device advertises the mcia_32dwords capability, but struct mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just 12 dwords (48 bytes) of data. mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then memcpy()s that many bytes out of the register, potentially reading past the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this is caught as a buffer overflow while reading the module EEPROM via ethtool: detected buffer overflow in memcpy kernel BUG at lib/string_helpers.c:1048! RIP: 0010:fortify_panic+0x13/0x20 Call Trace: mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core] mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core] mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core] eeprom_prepare_data+0xf3/0x170 ethnl_default_doit+0xf1/0x3b0 Extend the mcia_reg layout to 32 dwords. | ||||
| CVE-2026-68098 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound DACL dedup walk to copied ACEs set_ntacl_dacl() can stop copying ACEs before consuming the full input DACL when size accounting overflows. When that happens, num_aces reflects only the ACEs that were actually copied into the output DACL, but set_posix_acl_entries_dacl() still receives nt_num_aces and uses it to walk the existing ACE array during dedup. That makes the dedup walk scan past the copied ACE array and inspect buffer tail that does not contain valid ACEs. Split the two meanings currently carried by the NT ACE count. Pass the number of copied NT ACEs to bound the dedup walk, and preserve the original "input DACL had NT ACEs" state separately for the Everyone/default ACL fallback. This keeps the dedup walk aligned with the ACEs that are actually present in the rebuilt DACL. | ||||