Export limit exceeded: 420997 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (420997 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46095 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: raise barrier before state machine transition Move the barrier raise operation before calling llbitmap_state_machine() in both llbitmap_start_write() and llbitmap_start_discard(). This ensures the barrier is in place before any state transitions occur, preventing potential race conditions where the state machine could complete before the barrier is properly raised. | ||||
| CVE-2026-46094 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access The bounds check for the next xattr entry in check_xattrs() uses (void *)next >= end, which allows next to point within sizeof(u32) bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4 bytes via *(__u32 *)(entry), which can overrun the valid xattr region. For example, if next lands at end - 1, the check passes since next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1, accessing 3 bytes beyond the valid region. Fix this by changing the check to (void *)next + sizeof(u32) > end, ensuring there is always enough space for the IS_LAST_ENTRY() read on the subsequent iteration. | ||||
| CVE-2026-46092 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: check for PCI upstream bridge existence pci_upstream_bridge() returns NULL if the device is on a root bus. If 8821CE is installed in the system with such a PCI topology, the probing routine will crash. This has probably been unnoticed as 8821CE is mostly supplied in laptops where there is a PCI-to-PCI bridge located upstream from the device. However the card might be installed on a system with different configuration. Check if the bridge does exist for the specific workaround to be applied. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. | ||||
| CVE-2026-46091 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: heed coherency rules In a control request, the USB request structure can be subject to DMA on some HCs. Hence it must obey the rules for DMA coherency. Allocate it separately. | ||||
| CVE-2026-46089 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: do not forget to endio for partial discard requests As reported by Qu Wenruo and Avinesh Kumar, the following getconf PAGESIZE 65536 blkdiscard -p 4k /dev/zram0 takes literally forever to complete. zram doesn't support partial discards and just returns immediately w/o doing any discard work in such cases. The problem is that we forget to endio on our way out, so blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to end_bio label, which does bio_endio(). | ||||
| CVE-2026-46088 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names() snd_ctl_elem_init_enum_names() advances pointer p through the names buffer while decrementing buf_len. If buf_len reaches zero but items remain, the next iteration calls strnlen(p, 0). While strnlen(p, 0) returns 0 and would hit the existing name_len == 0 error path, CONFIG_FORTIFY_SOURCE's fortified strnlen() first checks maxlen against __builtin_dynamic_object_size(). When Clang loses track of p's object size inside the loop, this triggers a BRK exception panic before the return value is examined. Add a buf_len == 0 guard at the loop entry to prevent calling fortified strnlen() on an exhausted buffer. Found by kernel fuzz testing through Xiaomi Smartphone. | ||||
| CVE-2026-46086 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: use a stable FDB dst snapshot in RCU readers Local FDB entries can be rewritten in place by `fdb_delete_local()`, which updates `f->dst` to another port or to `NULL` while keeping the entry alive. Several bridge RCU readers inspect `f->dst`, including `br_fdb_fillbuf()` through the `brforward_read()` sysfs path. These readers currently load `f->dst` multiple times and can therefore observe inconsistent values across the check and later dereference. In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change `f->dst` after the NULL check and before the `port_no` dereference, leading to a NULL-ptr-deref. Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()` with `WRITE_ONCE()` so the readers and writer use matching access patterns. | ||||
| CVE-2026-46084 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: Disable RX steering on RSS QP destroy When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss() destroys the RX WQ objects but does not disable vPort RX steering in firmware. This leaves stale steering configuration that still points to the destroyed RX objects. If traffic continues to arrive (e.g. peer VM is still transmitting) and the VF interface is subsequently brought up (mana_open), the firmware may deliver completions using stale CQ IDs from the old RX objects. These CQ IDs can be reused by the ethernet driver for new TX CQs, causing RX completions to land on TX CQs: WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false) WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails) Fix this by disabling vPort RX steering before destroying RX WQ objects. Note that mana_fence_rqs() cannot be used here because the fence completion is delivered on the CQ, which is polled by user-mode (e.g. DPDK) and not visible to the kernel driver. Refactor the disable logic into a shared mana_disable_vport_rx() in mana_en, exported for use by mana_ib, replacing the duplicate code. The ethernet driver's mana_dealloc_queues() is also updated to call this common function. | ||||
| CVE-2026-46083 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: fix resource leaks on device setup failure Make sure to call controller cleanup() if spi_setup() fails while registering a device to avoid leaking any resources allocated by setup(). | ||||
| CVE-2026-46082 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0 INVLPGA should cause a #UD when EFER.SVME is not set. Add a check to properly inject #UD when EFER.SVME=0. [sean: tag for stable@] | ||||
| CVE-2026-46080 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: split transactions in dio completion to avoid credit exhaustion During ocfs2 dio operations, JBD2 may report warnings via following call trace: ocfs2_dio_end_io_write ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ocfs2_try_to_merge_extent ocfs2_extend_rotate_transaction ocfs2_extend_trans jbd2__journal_restart start_this_handle output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449 To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to handle extents in a batch of transaction. Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode should only be removed from the orphan list after the extent tree update is complete. This ensures that if a crash occurs in the middle of extent tree updates, we won't leave stale blocks beyond EOF. This patch also changes the logic for updating the inode size and removing orphan, making it similar to ext4_dio_write_end_io(). Both operations are performed only when everything looks good. Finally, thanks to Jans and Joseph for providing the bug fix prototype and suggestions. | ||||
| CVE-2026-46079 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rbd: fix null-ptr-deref when device_add_disk() fails do_rbd_add() publishes the device with device_add() before calling device_add_disk(). If device_add_disk() fails after device_add() succeeds, the error path calls rbd_free_disk() directly and then later falls through to rbd_dev_device_release(), which calls rbd_free_disk() again. This double teardown can leave blk-mq cleanup operating on invalid state and trigger a null-ptr-deref in __blk_mq_free_map_and_rqs(), reached from blk_mq_free_tag_set(). Fix this by following the normal remove ordering: call device_del() before rbd_dev_device_release() when device_add_disk() fails after device_add(). That keeps the teardown sequence consistent and avoids re-entering disk cleanup through the wrong path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. We reproduced the bug on v7.0 with a real Ceph backend and a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. The reproducer confines failslab injections to the __add_disk() range and injects fail-nth while mapping an RBD image through /sys/bus/rbd/add_single_major. On the unpatched kernel, fail-nth=4 reliably triggered the fault: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 UID: 0 PID: 273 Comm: bash Not tainted 7.0.0-01247-gd60bc1401583 #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__blk_mq_free_map_and_rqs+0x8c/0x240 Code: 00 00 48 8b 6b 60 41 89 f4 49 c1 e4 03 4c 01 e5 45 85 ed 0f 85 0a 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 e9 48 c1 e9 03 <80> 3c 01 00 0f 85 31 01 00 00 4c 8b 6d 00 4d 85 ed 0f 84 e2 00 00 RSP: 0018:ff1100000ab0fac8 EFLAGS: 00000246 RAX: dffffc0000000000 RBX: ff1100000c4806a0 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: ff1100000c4806f4 RBP: 0000000000000000 R08: 0000000000000001 R09: ffe21c000189001b R10: ff1100000c4800df R11: ff1100006cf37be0 R12: 0000000000000000 R13: 0000000000000000 R14: ff1100000c480700 R15: ff1100000c480004 FS: 00007f0fbe8fe740(0000) GS:ff110000e5851000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe53473b2e0 CR3: 0000000012eef000 CR4: 00000000007516f0 PKRU: 55555554 Call Trace: <TASK> blk_mq_free_tag_set+0x77/0x460 do_rbd_add+0x1446/0x2b80 ? __pfx_do_rbd_add+0x10/0x10 ? lock_acquire+0x18c/0x300 ? find_held_lock+0x2b/0x80 ? sysfs_file_kobj+0xb6/0x1b0 ? __pfx_sysfs_kf_write+0x10/0x10 kernfs_fop_write_iter+0x2f4/0x4a0 vfs_write+0x98e/0x1000 ? expand_files+0x51f/0x850 ? __pfx_vfs_write+0x10/0x10 ksys_write+0xf2/0x1d0 ? __pfx_ksys_write+0x10/0x10 do_syscall_64+0x115/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0fbea15907 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffe22346ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000058 RCX: 00007f0fbea15907 RDX: 0000000000000058 RSI: 0000563ace6c0ef0 RDI: 0000000000000001 RBP: 0000563ace6c0ef0 R08: 0000563ace6c0ef0 R09: 6b6435726d694141 R10: 5250337279762f78 R11: 0000000000000246 R12: 0000000000000058 R13: 00007f0fbeb1c780 R14: ff1100000c480700 R15: ff1100000c480004 </TASK> With this fix applied, rerunning the reproducer over fail-nth=1..256 yields no KASAN reports. [ idryomov: rename err_out_device_del -> err_out_device ] | ||||
| CVE-2026-46071 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Avoid clearing VMCB_LBR in vmcb12 svm_copy_lbrs() always marks VMCB_LBR dirty in the destination VMCB. However, nested_svm_vmexit() uses it to copy LBRs to vmcb12, and clearing clean bits in vmcb12 is not architecturally defined. Move vmcb_mark_dirty() to callers and drop it for vmcb12. This also facilitates incoming refactoring that does not pass the entire VMCB to svm_copy_lbrs(). | ||||
| CVE-2026-46069 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup() The mwifiex_adapter_cleanup() function uses timer_delete() (non-synchronous) for the wakeup_timer before the adapter structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If the wakeup_timer callback (wakeup_timer_fn) is executing when mwifiex_adapter_cleanup() is called, the callback will continue to access adapter fields (adapter->hw_status, adapter->if_ops.card_reset, etc.) which may be freed by mwifiex_free_adapter() called later in the mwifiex_remove_card() path. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. | ||||
| CVE-2026-46068 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx The bounce buffers are allocated with __get_free_pages() using BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error path and nx842_crypto_free_ctx() release the buffers with free_page(). Use free_pages() with the matching order instead. | ||||
| CVE-2026-46066 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix num_ops off-by-one when crypto allocation fails move_dirty_folio_in_page_array() may fail if the file is encrypted, the dirty folio is not the first in the batch, and it fails to allocate a bounce buffer to hold the ciphertext. When that happens, ceph_process_folio_batch() simply redirties the folio and flushes the current batch -- it can retry that folio in a future batch. However, if this failed folio is not contiguous with the last folio that did make it into the batch, then ceph_process_folio_batch() has already incremented `ceph_wbc->num_ops`; because it doesn't follow through and add the discontiguous folio to the array, ceph_submit_write() -- which expects that `ceph_wbc->num_ops` accurately reflects the number of contiguous ranges (and therefore the required number of "write extent" ops) in the writeback -- will panic the kernel: BUG_ON(ceph_wbc->op_idx + 1 != req->r_num_ops); This issue can be reproduced on affected kernels by writing to fscrypt-enabled CephFS file(s) with a 4KiB-written/4KiB-skipped/repeat pattern (total filesize should not matter) and gradually increasing the system's memory pressure until a bounce buffer allocation fails. Fix this crash by decrementing `ceph_wbc->num_ops` back to the correct value when move_dirty_folio_in_page_array() fails, but the folio already started counting a new (i.e. still-empty) extent. The defect corrected by this patch has existed since 2022 (see first `Fixes:`), but another bug blocked multi-folio encrypted writeback until recently (see second `Fixes:`). The second commit made it into 6.18.16, 6.19.6, and 7.0-rc1, unmasking the panic in those versions. This patch therefore fixes a regression (panic) introduced by cac190c7674f. | ||||
| CVE-2026-46063 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/shstk: Prevent deadlock during shstk sigreturn During sigreturn the shadow stack signal frame is popped. The kernel does this by reading the shadow stack using normal read accesses. When it can't assume the memory is shadow stack, it takes extra steps to makes sure it is reading actual shadow stack memory and not other normal readable memory. It does this by holding the mmap read lock while doing the access and checking the flags of the VMA. Unfortunately that is not safe. If the read of the shadow stack sigframe hits a page fault, the fault handler will try to recursively grab another mmap read lock. This normally works ok, but if a writer on another CPU is also waiting, the second read lock could fail and cause a deadlock. Fix this by not holding mmap lock during the read access to userspace. Instead use mmap_lock_speculate_...() to watch for changes between dropping mmap lock and the userspace access. Retry if anything grabbed an mmap write lock in between and could have changed the VMA. These mmap_lock_speculate_...() helpers use mm::mm_lock_seq, which is only available when PER_VMA_LOCK is configured. So make X86_USER_SHADOW_STACK depend on it. On x86, PER_VMA_LOCK is a default configuration for SMP kernels. So drop support for the other configs under the assumption that the !SMP shadow stack user base does not exist. Currently there is a check that skips the lookup work when the SSP can be assumed to be on a shadow stack. While reorganizing the function, remove the optimization to make the tricky code flows more common, such that issues like this cannot escape detection for so long. | ||||
| CVE-2026-46060 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix IRQ cleanup on 6xxx probe failure When adf_dev_up() partially completes and then fails, the IRQ handlers registered during adf_isr_resource_alloc() are not detached before the MSI-X vectors are released. Since the device is enabled with pcim_enable_device(), calling pci_alloc_irq_vectors() internally registers pcim_msi_release() as a devres action. On probe failure, devres runs pcim_msi_release() which calls pci_free_irq_vectors(), tearing down the MSI-X vectors while IRQ handlers (for example 'qat0-bundle0') are still attached. This causes remove_proc_entry() warnings: [ 22.163964] remove_proc_entry: removing non-empty directory 'irq/143', leaking at least 'qat0-bundle0' Moving the devm_add_action_or_reset() before adf_dev_up() does not solve the problem since devres runs in LIFO order and pcim_msi_release(), registered later inside adf_dev_up(), would still fire before adf_device_down(). Fix by calling adf_dev_down() explicitly when adf_dev_up() fails, to properly free IRQ handlers before devres releases the MSI-X vectors. | ||||
| CVE-2026-46059 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use NextRIP as vmcb02's NextRIP after first L2 VMRUN For guests with NRIPS disabled, L1 does not provide NextRIP when running an L2 with an injected soft interrupt, instead it advances the current RIP before running it. KVM uses the current RIP as the NextRIP in vmcb02 to emulate a CPU without NRIPS. However, after L2 runs the first time, NextRIP will be updated by the CPU and/or KVM, and the current RIP is no longer the correct value to use in vmcb02. Hence, after save/restore, use the current RIP if and only if a nested run is pending, otherwise use NextRIP. Give soft_int_next_rip the same treatment, as it's the same logic, just for a narrower use case. [sean: give soft_int_next_rip the same treatment] | ||||
| CVE-2026-46051 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix soft lockup in retry_aligned_read() When retry_aligned_read() encounters an overlapped stripe, it releases the stripe via raid5_release_stripe() which puts it on the lockless released_stripes llist. In the next raid5d loop iteration, release_stripe_list() drains the stripe onto handle_list (since STRIPE_HANDLE is set by the original IO), but retry_aligned_read() runs before handle_active_stripes() and removes the stripe from handle_list via find_get_stripe() -> list_del_init(). This prevents handle_stripe() from ever processing the stripe to resolve the overlap, causing an infinite loop and soft lockup. Fix this by using __release_stripe() with temp_inactive_list instead of raid5_release_stripe() in the failure path, so the stripe does not go through the released_stripes llist. This allows raid5d to break out of its loop, and the overlap will be resolved when the stripe is eventually processed by handle_stripe(). | ||||