Export limit exceeded: 26234 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 420527 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (420527 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-39736 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock When netpoll is enabled, calling pr_warn_once() while holding kmemleak_lock in mem_pool_alloc() can cause a deadlock due to lock inversion with the netconsole subsystem. This occurs because pr_warn_once() may trigger netpoll, which eventually leads to __alloc_skb() and back into kmemleak code, attempting to reacquire kmemleak_lock. This is the path for the deadlock. mem_pool_alloc() -> raw_spin_lock_irqsave(&kmemleak_lock, flags); -> pr_warn_once() -> netconsole subsystem -> netpoll -> __alloc_skb -> __create_object -> raw_spin_lock_irqsave(&kmemleak_lock, flags); Fix this by setting a flag and issuing the pr_warn_once() after kmemleak_lock is released. | ||||
| CVE-2025-39724 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250: fix panic due to PSLVERR When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70 | ||||
| CVE-2025-39721 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - flush misc workqueue during device shutdown Repeated loading and unloading of a device specific QAT driver, for example qat_4xxx, in a tight loop can lead to a crash due to a use-after-free scenario. This occurs when a power management (PM) interrupt triggers just before the device-specific driver (e.g., qat_4xxx.ko) is unloaded, while the core driver (intel_qat.ko) remains loaded. Since the driver uses a shared workqueue (`qat_misc_wq`) across all devices and owned by intel_qat.ko, a deferred routine from the device-specific driver may still be pending in the queue. If this routine executes after the driver is unloaded, it can dereference freed memory, resulting in a page fault and kernel crash like the following: BUG: unable to handle page fault for address: ffa000002e50a01c #PF: supervisor read access in kernel mode RIP: 0010:pm_bh_handler+0x1d2/0x250 [intel_qat] Call Trace: pm_bh_handler+0x1d2/0x250 [intel_qat] process_one_work+0x171/0x340 worker_thread+0x277/0x3a0 kthread+0xf0/0x120 ret_from_fork+0x2d/0x50 To prevent this, flush the misc workqueue during device shutdown to ensure that all pending work items are completed before the driver is unloaded. Note: This approach may slightly increase shutdown latency if the workqueue contains jobs from other devices, but it ensures correctness and stability. | ||||
| CVE-2025-39713 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: rainshadow-cec: fix TOCTOU race condition in rain_interrupt() In the interrupt handler rain_interrupt(), the buffer full check on rain->buf_len is performed before acquiring rain->buf_lock. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition, as rain->buf_len is concurrently accessed and modified in the work handler rain_irq_work_handler() under the same lock. Multiple interrupt invocations can race, with each reading buf_len before it becomes full and then proceeding. This can lead to both interrupts attempting to write to the buffer, incrementing buf_len beyond its capacity (DATA_SIZE) and causing a buffer overflow. Fix this bug by moving the spin_lock() to before the buffer full check. This ensures that the check and the subsequent buffer modification are performed atomically, preventing the race condition. An corresponding spin_unlock() is added to the overflow path to correctly release the lock. This possible bug was found by an experimental static analysis tool developed by our team. | ||||
| CVE-2025-39701 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: pfr_update: Fix the driver update version check The security-version-number check should be used rather than the runtime version check for driver updates. Otherwise, the firmware update would fail when the update binary had a lower runtime version number than the current one. [ rjw: Changelog edits ] | ||||
| CVE-2025-39681 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper Since 923f3a2b48bd ("x86/resctrl: Query LLC monitoring properties once during boot") resctrl_cpu_detect() has been moved from common CPU initialization code to the vendor-specific BSP init helper, while Hygon didn't put that call in their code. This triggers a division by zero fault during early booting stage on our machines with X86_FEATURE_CQM* supported, where get_rdt_mon_resources() tries to calculate mon_l3_config with uninitialized boot_cpu_data.x86_cache_occ_scale. Add the missing resctrl_cpu_detect() in the Hygon BSP init helper. [ bp: Massage commit message. ] | ||||
| CVE-2025-39678 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Ensure sock->metric_tbl_addr is non-NULL If metric table address is not allocated, accessing metrics_bin will result in a NULL pointer dereference, so add a check. | ||||
| CVE-2025-39676 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla4xxx: Prevent a potential error pointer dereference The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error, but qla4xxx_ep_connect() returns error pointers. Propagating the error pointers will lead to an Oops in the caller, so change the error pointers to NULL. | ||||
| CVE-2025-38732 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_reject: don't leak dst refcount for loopback packets recent patches to add a WARN() when replacing skb dst entry found an old bug: WARNING: include/linux/skbuff.h:1165 skb_dst_check_unset include/linux/skbuff.h:1164 [inline] WARNING: include/linux/skbuff.h:1165 skb_dst_set include/linux/skbuff.h:1210 [inline] WARNING: include/linux/skbuff.h:1165 nf_reject_fill_skb_dst+0x2a4/0x330 net/ipv4/netfilter/nf_reject_ipv4.c:234 [..] Call Trace: nf_send_unreach+0x17b/0x6e0 net/ipv4/netfilter/nf_reject_ipv4.c:325 nft_reject_inet_eval+0x4bc/0x690 net/netfilter/nft_reject_inet.c:27 expr_call_ops_eval net/netfilter/nf_tables_core.c:237 [inline] .. This is because blamed commit forgot about loopback packets. Such packets already have a dst_entry attached, even at PRE_ROUTING stage. Instead of checking hook just check if the skb already has a route attached to it. | ||||
| CVE-2025-38729 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Validate UAC3 power domain descriptors, too UAC3 power domain descriptors need to be verified with its variable bLength for avoiding the unexpected OOB accesses by malicious firmware, too. | ||||
| CVE-2025-38725 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix_devices: add phy_mask for ax88772 mdio bus Without setting phy_mask for ax88772 mdio bus, current driver may create at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f. DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy device will bind to net phy driver. This is creating issue during system suspend/resume since phy_polling_mode() in phy_state_machine() will directly deference member of phydev->drv for non-main phy devices. Then NULL pointer dereference issue will occur. Due to only external phy or internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud the issue. | ||||
| CVE-2025-38721 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: fix refcount leak on table dump There is a reference count leak in ctnetlink_dump_table(): if (res < 0) { nf_conntrack_get(&ct->ct_general); // HERE cb->args[1] = (unsigned long)ct; ... While its very unlikely, its possible that ct == last. If this happens, then the refcount of ct was already incremented. This 2nd increment is never undone. This prevents the conntrack object from being released, which in turn keeps prevents cnet->count from dropping back to 0. This will then block the netns dismantle (or conntrack rmmod) as nf_conntrack_cleanup_net_list() will wait forever. This can be reproduced by running conntrack_resize.sh selftest in a loop. It takes ~20 minutes for me on a preemptible kernel on average before I see a runaway kworker spinning in nf_conntrack_cleanup_net_list. One fix would to change this to: if (res < 0) { if (ct != last) nf_conntrack_get(&ct->ct_general); But this reference counting isn't needed in the first place. We can just store a cookie value instead. A followup patch will do the same for ctnetlink_exp_dump_table, it looks to me as if this has the same problem and like ctnetlink_dump_table, we only need a 'skip hint', not the actual object so we can apply the same cookie strategy there as well. | ||||
| CVE-2025-38709 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: loop: Avoid updating block size under exclusive owner Syzbot came up with a reproducer where a loop device block size is changed underneath a mounted filesystem. This causes a mismatch between the block device block size and the block size stored in the superblock causing confusion in various places such as fs/buffer.c. The particular issue triggered by syzbot was a warning in __getblk_slow() due to requested buffer size not matching block device block size. Fix the problem by getting exclusive hold of the loop device to change its block size. This fails if somebody (such as filesystem) has already an exclusive ownership of the block device and thus prevents modifying the loop device under some exclusive owner which doesn't expect it. | ||||
| CVE-2025-38706 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime() snd_soc_remove_pcm_runtime() might be called with rtd == NULL which will leads to null pointer dereference. This was reproduced with topology loading and marking a link as ignore due to missing hardware component on the system. On module removal the soc_tplg_remove_link() would call snd_soc_remove_pcm_runtime() with rtd == NULL since the link was ignored, no runtime was created. | ||||
| CVE-2025-38701 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: do not BUG when INLINE_DATA_FL lacks system.data xattr A syzbot fuzzed image triggered a BUG_ON in ext4_update_inline_data() when an inode had the INLINE_DATA_FL flag set but was missing the system.data extended attribute. Since this can happen due to a maiciouly fuzzed file system, we shouldn't BUG, but rather, report it as a corrupted file system. Add similar replacements of BUG_ON with EXT4_ERROR_INODE() ii ext4_create_inline_data() and ext4_inline_data_truncate(). | ||||
| CVE-2025-38700 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocated In case of an ib_fast_reg_mr allocation failure during iSER setup, the machine hits a panic because iscsi_conn->dd_data is initialized unconditionally, even when no memory is allocated (dd_size == 0). This leads invalid pointer dereference during connection teardown. Fix by setting iscsi_conn->dd_data only if memory is actually allocated. Panic trace: ------------ iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12 iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers BUG: unable to handle page fault for address: fffffffffffffff8 RIP: 0010:swake_up_locked.part.5+0xa/0x40 Call Trace: complete+0x31/0x40 iscsi_iser_conn_stop+0x88/0xb0 [ib_iser] iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi] iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi] iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi] ? netlink_lookup+0x12f/0x1b0 ? netlink_deliver_tap+0x2c/0x200 netlink_unicast+0x1ab/0x280 netlink_sendmsg+0x257/0x4f0 ? _copy_from_user+0x29/0x60 sock_sendmsg+0x5f/0x70 | ||||
| CVE-2025-38695 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Check for hdwq null ptr when cleaning up lpfc_vport structure If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may occur before sli4_hba.hdwqs are allocated. This may result in a null pointer dereference when attempting to take the abts_io_buf_list_lock for the first hardware queue. Fix by adding a null ptr check on phba->sli4_hba.hdwq and early return because this situation means there must have been an error during port initialization. | ||||
| CVE-2025-38694 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: dib7090p: fix null-ptr-deref in dib7090p_rw_on_apb() In dib7090p_rw_on_apb, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add check on msg[0].len to prevent crash. Similar issue occurs when access msg[1].buf[0] and msg[1].buf[1]. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") | ||||
| CVE-2025-38693 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: w7090p: fix null-ptr-deref in w7090p_tuner_write_serpar and w7090p_tuner_read_serpar In w7090p_tuner_write_serpar, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add check on msg[0].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") | ||||
| CVE-2025-38692 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exfat: add cluster chain loop check for dir An infinite loop may occur if the following conditions occur due to file system corruption. (1) Condition for exfat_count_dir_entries() to loop infinitely. - The cluster chain includes a loop. - There is no UNUSED entry in the cluster chain. (2) Condition for exfat_create_upcase_table() to loop infinitely. - The cluster chain of the root directory includes a loop. - There are no UNUSED entry and up-case table entry in the cluster chain of the root directory. (3) Condition for exfat_load_bitmap() to loop infinitely. - The cluster chain of the root directory includes a loop. - There are no UNUSED entry and bitmap entry in the cluster chain of the root directory. (4) Condition for exfat_find_dir_entry() to loop infinitely. - The cluster chain includes a loop. - The unused directory entries were exhausted by some operation. (5) Condition for exfat_check_dir_empty() to loop infinitely. - The cluster chain includes a loop. - The unused directory entries were exhausted by some operation. - All files and sub-directories under the directory are deleted. This commit adds checks to break the above infinite loop. | ||||