| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| A vulnerability on Mitel 6800 Series and 6900 Series SIP Phones through 6.3 SP3 HF4, 6900w Series SIP Phone through 6.3.3, and 6970 Conference Unit through 5.1.1 SP8 allows an authenticated attacker to conduct a buffer overflow attack due to insufficient bounds checking and input sanitization. A successful exploit could allow an attacker to gain access to sensitive information, modify system configuration or execute arbitrary commands within the context of the system. |
| Dzmitry Lukyanenka, member of the AXIS OS Bug Bounty Program, has found that the VAPIX API param.cgi was vulnerable to a race condition attack allowing for an attacker to block access to the web interface of the Axis device. Other API endpoints or services not making use of param.cgi are not affected.
Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| Buffer Overflow vulnerability in msoulier tftpy commit 467017b844bf6e31745138a30e2509145b0c529c allows a remote attacker to cause a denial of service via the parse function in the TftpPacketFactory class. |
| Npgsql is the .NET data provider for PostgreSQL. The `WriteBind()` method in `src/Npgsql/Internal/NpgsqlConnector.FrontendMessages.cs` uses `int` variables to store the message length and the sum of parameter lengths. Both variables overflow when the sum of parameter lengths becomes too large. This causes Npgsql to write a message size that is too small when constructing a Postgres protocol message to send it over the network to the database. When parsing the message, the database will only read a small number of bytes and treat any following bytes as new messages while they belong to the old message. Attackers can abuse this to inject arbitrary Postgres protocol messages into the connection, leading to the execution of arbitrary SQL statements on the application's behalf. This vulnerability is fixed in 4.0.14, 4.1.13, 5.0.18, 6.0.11, 7.0.7, and 8.0.3. |
| A post-authentication format string vulnerability in SonicOS management allows a remote attacker to crash a firewall and potentially leads to code execution. |
| Improper neutralization of special elements used in SQL command in some Intel(R) Neural Compressor software before version v3.0 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| A stack-buffer-overflow vulnerability exists in the read_charset_decl function of html2xhtml 1.3. This vulnerability occurs due to improper bounds checking when copying data into a fixed-size stack buffer. An attacker can exploit this vulnerability by providing a specially crafted input to the vulnerable function, causing a buffer overflow and potentially leading to arbitrary code execution, denial of service, or data corruption. |
| AMI (aka American Megatrends) NTFS driver 1.0.0 (fixed in late 2021 or early 2022) has a buffer overflow. This driver is, for example, used in certain ASUS devices. |
| On affected platforms running Arista EOS with 802.1X configured, certain conditions may occur where a dynamic ACL is received from the AAA server resulting in only the first line of the ACL being installed after an Accelerated Software Upgrade (ASU) restart.
Note: supplicants with pending captive-portal authentication during ASU would be impacted with this bug. |
| Buffer Copy without Checking Size of Input (CWE-120) in the Controller 6000 and Controller 7000 diagnostic web interface allows an authorised and authenticated operator to reboot the Controller, causing a Denial of Service. Gallagher recommend the diagnostic web page is not enabled (default is off) unless advised by Gallagher Technical support. This interface is intended only for diagnostic purposes.
This issue affects: Controller 6000 and Controller 7000 9.10 prior to vCR9.10.240816a (distributed in 9.10.1530 (MR2)), 9.00 prior to vCR9.00.240816a (distributed in 9.00.2168 (MR4)), 8.90 prior to vCR8.90.240816a (distributed in 8.90.2155 (MR5)), 8.80 prior to vCR8.80.240816b (distributed in 8.80.1938 (MR6)), all versions of 8.70 and prior. |
| The initial code parsing the manifest did not check the content of the file names yet later code assumed that it was checked and panicked when encountering illegal characters, resulting in a crash of Routinator. |
| A vulnerability was found in China Mobile P22g-CIac, ZXWT-MIG-P4G4V, ZXWT-MIG-P8G8V, GT3200-4G4P and GT3200-8G8P up to 20250305. It has been rated as critical. This issue affects some unknown processing of the component CLI su Command Handler. The manipulation leads to use of default credentials. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
|
Improper Input Validation vulnerability in Samsung Open Source escargot JavaScript engine allows Overflow Buffers.
However, it occurs in the test code and does not include in the release.
This issue affects escargot: 4.0.0.
|
| Yubico YubiKey 5.4.1 through 5.7.3 before 5.7.4 has an incorrect FIDO CTAP PIN/UV Auth Protocol Two implementation. It uses the signature length from CTAP PIN/UV Auth Protocol One, even when CTAP PIN/UV Auth Protocol Two was chosen, resulting in a partial signature verification. |
| The Access Manager 92xx in hardware revision K7 is based on Linux instead of Windows CE embedded in older hardware revisions. In this new hardware revision it was noticed that an SSH service is exposed on port 22. By analyzing the firmware of the devices, it was noticed that there are two users with hardcoded and weak passwords that can be used to access the devices via SSH. The passwords can be also guessed very easily. The password of at least one user is set to a random value after the first deployment, with the restriction that the password is only randomized if the configured date is prior to 2022. Therefore, under certain circumstances, the passwords are not randomized. For example, if the clock is never set on the device, the battery of the clock module has been changed, the Access Manager has been factory reset and has not received a time yet. |
| Insufficient parameter validation while allocating process space in the Trusted OS (TOS) may allow for a malicious userspace process to trigger an integer overflow, leading to a potential denial of service. |
| In certain Sonos products before S1 Release 11.12 and S2 release 15.9, the mt_7615.ko wireless driver does not properly validate an information element during negotiation of a WPA2 four-way handshake. This lack of validation leads to a stack buffer overflow. This can result in remote code execution within the kernel. This affects Amp, Arc, Arc SL, Beam, Beam Gen 2, Beam SL, and Five. |