Export limit exceeded: 22833 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22879 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80560 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openrisc: signal: do not restore privileged SR bits on sigreturn restore_sigcontext() copies the whole supervision register (SR) from the signal frame and only clears SPR_SR_SM before the value is reloaded into the hardware SR (through ESR and l.rfe) on the return to user space. All other SR bits are left under user control. An unprivileged task can thus return from a signal handler through a crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the CPU performs no translation or protection on data accesses, so the task gains read and write access to arbitrary physical memory, a local privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH and the cache-enable bits are exposed the same way. The ptrace GPR regset already refuses any change to SR for exactly this reason. Restore only the arithmetic flag bits (F, CY, OV) from the signal frame and take every privileged control bit from the SR the kernel saved on signal entry. Verified with qemu-system-or1k -M or1k-sim: before this change an unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the same PoC receives SIGSEGV and physical memory is unchanged. | ||||
| CVE-2026-74744 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvlan: inherit needed_headroom and needed_tailroom from phy_dev ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying phy_dev (or stacked lower device) requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. | ||||
| CVE-2026-74745 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: avoid deadlock when canceling IRQ affinity notifier Unregistering IRQ affinity notifiers waits for the callback synchronously. bnxt takes the netdev instance lock in the notifier (to restart the queue) and cancels the work under the same lock. This may obviously deadlock. Move the restart to the async service task. The queue restart isn't super time sensitive. Store the new TPH tag, schedule the task. Safely canceling the service task is already ironed out. In bnxt_request_irq() the order of registering notifier, affinity and initial TPH programming has to be inverted. I think it was racy previously since user may trigger an update as soon as notifier is installed. There's a small known gap - if pcie_tph_get_cpu_st() fails at init and the target tag is 0 we may miss programming the entry. This does not seem worth fixing, the code has skip-on-failure all over the place, anyway. | ||||
| CVE-2026-74750 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: defer key slot crypto freeing to workqueue Key slots are released through a kref and the existing release path frees the AEAD transforms from an RCU callback. That is not safe for all crypto implementations: crypto_free_aead can sleep, for example when an async or hardware implementation has teardown work to complete. Use queue_rcu_work for key-slot release. This keeps the RCU grace period needed by lockless key-slot readers, but runs the actual crypto teardown from workqueue context where sleeping is allowed. Once the rcu_work callback runs, pre-existing RCU readers are gone, and the final kref put already proves that no transform user remains, so the worker can release the AEAD transforms and free the slot directly. The previous patch drains ovpn_wq during module exit, so queued key-slot teardown work cannot outlive module text. | ||||
| CVE-2026-74753 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf: Reject exited events as group leaders perf_event_remove_on_exec() sets remove-on-exec events to the EXIT state and detaches their group relationships. The event's file descriptor can remain open, however, and perf_event_open() currently accepts that event as a group leader because its early validation rejects only REVOKED and DEAD events. A new sibling can consequently be linked to the detached leader. When the leader is closed, perf_group_detach() observes that its PERF_ATTACH_GROUP bit is already clear and skips the new sibling. The sibling then retains a group_leader pointer to the freed event. Reject group leaders in the EXIT state. Perform the check while holding the shared context mutex so that an exec in the target task cannot detach the leader between validation and group attachment. [peterz: make the earlier test fully consistent] | ||||
| CVE-2026-74746 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: publish GC-visible tuple last nf_flow_table_iterate() only treats original-direction tuple nodes as owning entries. Publishing the original node first lets GC observe and free a flow while flow_offload_add() is still inserting the reply node. Publish the reply node first and the original node last so GC never sees a partially installed flow. KASAN can trigger slab-use-after-free read and write reports in the flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del, flow_offload_lookup, etc.). | ||||
| CVE-2026-74748 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix refcount race between list:set GC and swap __ip_set_put_byindex() resolved the index to a set pointer under RCU, then took ip_set_ref_lock in __ip_set_put() to decrement set->ref. ip_set_swap() holds that same lock while swapping both the ip_set_list slots and the two sets' ref counters, so it can interleave between the dereference and the lock acquisition, leaving the caller to decrement a set whose reference already moved to the other index and hit BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq, which the nfnl mutex does not serialize against swap: an expiring list:set member calls list_set_del() -> ip_set_put_byindex() while IPSET_CMD_SWAP runs on the referenced sets. Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap() already does, keeping the refcount tied to the index rather than to a stale set pointer. kernel BUG at net/netfilter/ipset/ip_set_core.c:685! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870) Call Trace: <IRQ> list_set_del (net/netfilter/ipset/ip_set_list_set.c:159) set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181) list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578) call_timer_fn (kernel/time/timer.c:1748) __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374) run_timer_softirq (kernel/time/timer.c:2405) </IRQ> Kernel panic - not syncing: Fatal exception in interrupt | ||||
| CVE-2026-74751 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: riscv: lib: Fix ZBB strnlen reading past count boundary The ZBB-optimized strnlen loop loads one word ahead before checking the aligned boundary: REG_L t1, SZREG(t0) // load next word addi t0, t0, SZREG // advance orc.b t1, t1 bgeu t0, t4, 4f // boundary check AFTER load where t4 = (s + count) & -SZREG. When s is aligned and count is a multiple of SZREG, t4 equals s + count and the loop loads a full word starting at exactly s + count. If s + count falls on a page boundary with the next page unmapped, this faults. Fix by computing the aligned boundary from the last valid byte (s + count - 1) instead of s + count. This makes the loop stop at the word containing the last valid byte rather than potentially loading the word after it. The count == 0 case is already handled by the beqz early exit. Also add a pre-loop guard (bgeu t0, t4) for the case where all valid bytes fit within the first word. With the adjusted boundary, t4 can equal t0, and entering the loop with stale register state from the first-word processing would produce incorrect results. The final minu clamp ensures the result is still correct when the last loaded word extends past s + count - 1 within the same aligned word. | ||||
| CVE-2026-74754 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: pair EH runtime PM get and put shost->eh_noresume is currently consulted twice in one error handling iteration: once before scsi_autopm_get_host() and once again before scsi_autopm_put_host(). That is racy when a PM-triggered error path flips shost->eh_noresume while the SCSI EH thread is still running. The problem flow looks like this: PM path ufshcd_set_dev_pwr_mode() shost->eh_noresume = 1 ufshcd_execute_start_stop <-- trigger EH ... shost->eh_noresume = 0 EH path scsi_error_handler() if (!shost->eh_noresume) scsi_autopm_get_host() <-- skipped ... if (!shost->eh_noresume) scsi_autopm_put_host() <-- executed later In that case one EH iteration can skip autoresume on entry and still drop a runtime PM reference on exit. That leaves an unmatched runtime PM put and can trigger a runtime PM usage count underflow. Fix this by making eh_noresume a regular bool so it can be accessed with READ_ONCE() and WRITE_ONCE(). Snapshot it once per EH iteration and use that snapshot for both runtime PM get and put decisions. | ||||
| CVE-2026-80721 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: ensure no dangling hcon references in iso_conn After iso_conn_del(), ISO sockets should not dereference the hcon any more. Currently, clearing iso_conn::hcon relies on iso_conn_del() releasing the last reference to the iso_conn. Simplify this by explicitly clearing conn->hcon in iso_conn_del(), to avoid more complex reasoning on races about who holds the last reference. | ||||
| CVE-2026-80690 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Initialize hba->rpmbs list in ufshcd Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL pointer dereference in the device teardown path if ufs_rpmb_probe() fails. | ||||
| CVE-2026-80643 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Fix call trace due to missing release() When unloading the igen6_edac driver, there is a call trace: Device '(null)' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst. WARNING: drivers/base/core.c:2567 at device_release+0x84/0x90, CPU#5: rmmod/127209 ... RIP: 0010:device_release+0x84/0x90 Call Trace: <TASK> kobject_put+0x8c/0x220 put_device+0x17/0x30 igen6_unregister_mcis+0xa2/0xe0 [igen6_edac] igen6_remove+0x82/0xb0 [igen6_edac] ... Fix the call trace by providing empty release() functions for the memory controller devices. | ||||
| CVE-2026-80615 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dst_metadata: fix false-positive memcpy overflow in tun_dst_unclone kmalloc_flex() in metadata_dst_alloc() sets __counted_by for the structure to the options_len, which is then initialized to zero. Later, we're initializing the structure by copying the tunnel info together with the options, and this triggers a warning for a potential memcpy overflow, since the compiler estimates that the options can't fit into the structure, even though the memory for them is actually allocated. memcpy: detected buffer overflow: 104 byte write of buffer size 96 WARNING: CPU: X PID: Y at lib/string_helpers.c:1036 __fortify_report skb_tunnel_info_unclone+0x179/0x190 geneve_xmit+0x7fe/0xe00 The issue is triggered when built with clang and source fortification. Fix that by doing the copy in two stages: first - the main data with the options_len, then the options. This way the correct length should be known at the time of the copy. It would be better if the options_len never changed after allocation, but the allocation code is a little separate from the initialization and it would be awkward and potentially dangerous to return a struct with options_len set to a non-zero value from the metadata_dst_alloc(). Another option would be to use ip_tunnel_info_opts_set(), but it is doing too many unnecessary operations for the use case here. | ||||
| CVE-2026-80598 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix out-of-bounds read in decompress_lznt decompress_lznt() does not validate array index bounds before accessing the decompression table. A corrupted NTFS3 image with invalid compressed data can trigger an out-of-bounds read. Add index bounds checking to prevent the OOB access. | ||||
| CVE-2026-53362 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: account for fraggap on the paged allocation path In __ip6_append_data(), when the paged-allocation branch is taken (MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are computed as alloclen = fragheaderlen + transhdrlen; pagedlen = datalen - transhdrlen; datalen already includes fraggap (datalen = length + fraggap). When fraggap is non-zero, this is not the first skb and transhdrlen is zero. The fraggap bytes carried over from the previous skb are copied just past the fragment headers in the new skb's linear area. The linear area is therefore undersized by fraggap bytes while pagedlen is overstated by the same amount, and the copy writes past skb->end into the trailing skb_shared_info. An unprivileged user can trigger this via a UDPv6 socket using MSG_MORE together with MSG_SPLICE_PAGES. The bad accounting was introduced by commit 773ba4fe9104 ("ipv6: avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix __ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative copy value caused -EINVAL to be returned. That later commit allowed MSG_SPLICE_PAGES to proceed in this case, making the corruption triggerable. The non-paged branch sets alloclen to fraglen, which already accounts for fraggap because datalen does. Bring the paged branch in line by adding fraggap to alloclen and subtracting it from pagedlen. After this adjustment, copy no longer collapses to -fraggap on the paged path, so remove the stale comment describing that old arithmetic. Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES case, remove the MSG_SPLICE_PAGES exception from the negative copy check. | ||||
| CVE-2026-80587 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid combining some incoming suboptions Some MPTCP suboptions are mutually exclusive according to the RFC8684, but also because in different places, the code doesn't expect some combinations to be present. That's specially true for suboptions that would be present twice, but with different attributes. The new restrictions are the same as the ones applied on the output side, with mptcp_write_options. The same rules can be reused with a small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks this option [1], which is not the case on Linux. Here are the rules: Which options can be used together? X: mutually exclusive O: often used together C: can be used together in some cases P: could be used together but we prefer not to (optimisations) | Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC | |------|------|------|------|------|------|------|------|------| | MPC |------|------|------|------|------|------|------|------| | MPJ | X |------|------|------|------|------|------|------| | DSS | X | X |------|------|------|------|------|------| | ADD | X | X | P |------|------|------|------|------| | RM | C | C | C | P |------|------|------|------| | PRIO | X | C | C | C | C |------|------|------| | FAIL | X | X | C | X | X | X |------|------| | FC | X | X | P | X | X | X | X |------| | RST | X | X | X | X | X | X | O | O | |------|------|------|------|------|------|------|------|------| The only difference is with the 'P': another stack could send and ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be allowed. A few points of attention: - In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is no reason to add it with a SYN. Note that even with a 4th ACK, it doesn't seem to be useful, except when IDs are known in advance via another channel. Better not to break that. - Now, combining both an MP_CAPABLE and an MP_JOIN will no longer result to a reject of the two options, but only the second suboption is ignored. That seems OK to do that for this unexpected error. At least now all inconsistent combinations are handled the same way. This could change later in next. This also means the explicit checks for having both MPC + MPJ in subflow.c will now be unreachable. That's fine, they will be removed in a follow-up patch. - In case of conflicting combinations, the extra suboption(s) is/are ignored: having such combinations either means the remote peer is buggy, or is evil. The simplest action is then taken in this case: stop processing the current suboption. - In mp_opt->suboptions, there is also a bit reserved to the checksum, which can be used in an MP_CAPABLE and a DSS. Each time a DSS option can be used in parallel with another option, the checksum can be set, so the verification is combined into a new OPTIONS_MPTCP_DSS macro. - An MP_CAPABLE ACK can carry a Data-Level Length, and an optional Checksum: they are the same as the ones found in a DSS, because a DSS cannot be used in parallel to an MP_CAPABLE. Similarly, even if there is room, a DSS cannot be used with an MP_JOIN. | ||||
| CVE-2026-80583 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: lpass-tx-macro: Fix enum kcontrol accesses The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but tx-macro was missed. On 64-bit kernels built with CONFIG_SND_CTL_DEBUG, the elem value sanity check catches the 4 bytes written past the enumerated item and every read of these controls fails with -EINVAL: snd-sm8250 sound: control 2:0:0:DEC0 MODE:0: access overflow | ||||
| CVE-2026-80572 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: byd - synchronize timer deletion before freeing private data byd_disconnect() uses timer_delete() before freeing the driver's private data. This does not wait for a running byd_clear_touch() callback, which dereferences the private data and its psmouse pointer. A callback racing with disconnect can therefore access the private data after it has been freed. The timer can also still be re-armed by byd_process_byte() while the disconnect is in progress. Use timer_shutdown_sync() before freeing the private data: it waits for a running callback and turns any later re-arm attempt into a no-op. | ||||
| CVE-2026-80562 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: ml-ioh: use raw_spinlock_t for the register lock ioh_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. ioh_irq_enable() and ioh_irq_disable() take the same lock from the .irq_enable/.irq_disable callbacks, which are likewise invoked with desc->lock held. Convert the register lock to raw_spinlock_t. The same lock also serializes the GPIO direction/value callbacks and the suspend/resume register save/restore, and those critical sections only perform short sequences of MMIO register accesses (ioread32()/iowrite32()); the .irq_set_type callback additionally emits a dev_warn() on an unsupported type. None of these are sleepable operations, so keeping this register lock non-sleeping is appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. This is the same fix as commit a02b8950d619 ("gpio: pch: use raw_spinlock_t for the register lock"); this driver shares the same structure as gpio-pch. | ||||
| CVE-2026-80552 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Ensure index for read/write regions are within range The introduction of the capability chain rightly clamped the region indexes to the range of the capabilities itself, but neglected to do so for the existing read/write regions which should also be enforced. | ||||