| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
char: applicom: fix NULL pointer dereference in ac_ioctl
Discovered by Atuin - Automated Vulnerability Discovery Engine.
In ac_ioctl, the validation of IndexCard and the check for a valid
RamIO pointer are skipped when cmd is 6. However, the function
unconditionally executes readb(apbs[IndexCard].RamIO + VERS) at the
end.
If cmd is 6, IndexCard may reference a board that does not exist
(where RamIO is NULL), leading to a NULL pointer dereference.
Fix this by skipping the readb access when cmd is 6, as this
command is a global information query and does not target a specific
board context. |
| In the Linux kernel, the following vulnerability has been resolved:
net: broadcom: bcm4908_enet: update TX stats after actual transmission
Queueing packets doesn't guarantee their transmission. Update TX stats
after hardware confirms consuming submitted data.
This also fixes a possible race and NULL dereference.
bcm4908_enet_start_xmit() could try to access skb after freeing it in
the bcm4908_enet_poll_tx(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode
Currently, whenever there is a need to transmit an Action frame,
the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to
firmware. The P2P interfaces were available when wpa_supplicant is managing
the wlan interface.
However, the P2P interfaces are not created/initialized when only hostapd
is managing the wlan interface. And if hostapd receives an ANQP Query REQ
Action frame even from an un-associated STA, the brcmfmac driver tries
to use an uninitialized P2P vif pointer for sending the IOVAR to firmware.
This NULL pointer dereferencing triggers a driver crash.
[ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[...]
[ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 1417.075653] Call trace:
[ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac]
[ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac]
[ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211]
[ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211]
[ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158
[ 1417.076302] genl_rcv_msg+0x220/0x2a0
[ 1417.076317] netlink_rcv_skb+0x68/0x140
[ 1417.076330] genl_rcv+0x40/0x60
[ 1417.076343] netlink_unicast+0x330/0x3b8
[ 1417.076357] netlink_sendmsg+0x19c/0x3f8
[ 1417.076370] __sock_sendmsg+0x64/0xc0
[ 1417.076391] ____sys_sendmsg+0x268/0x2a0
[ 1417.076408] ___sys_sendmsg+0xb8/0x118
[ 1417.076427] __sys_sendmsg+0x90/0xf8
[ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40
[ 1417.076465] invoke_syscall+0x50/0x120
[ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0
[ 1417.076506] do_el0_svc+0x24/0x38
[ 1417.076525] el0_svc+0x30/0x100
[ 1417.076548] el0t_64_sync_handler+0x100/0x130
[ 1417.076569] el0t_64_sync+0x190/0x198
[ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000)
Fix this, by always using the vif corresponding to the wdev on which the
Action frame Transmission request was initiated by the userspace. This way,
even if P2P vif is not available, the IOVAR is sent to firmware on AP vif
and the ANQP Query RESP Action frame is transmitted without crashing the
driver.
Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev()
to brcmf_p2p_attach(). Because the former function would not get executed
when only hostapd is managing wlan interface, and it is not safe to do
reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior
init_completion().
And in the brcmf_p2p_tx_action_frame() function, the condition check for
P2P Presence response frame is not needed, since the wpa_supplicant is
properly sending the P2P Presense Response frame on the P2P-GO vif instead
of the P2P-Device vif.
[Cc stable] |
| In the Linux kernel, the following vulnerability has been resolved:
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
When kmalloc() fail to allocate memory in kasprintf(), fn_1 or fn_2 will
be NULL, and strcmp() will cause null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
of: unittest: fix null pointer dereferencing in of_unittest_find_node_by_name()
when kmalloc() fail to allocate memory in kasprintf(), name
or full_name will be NULL, strcmp() will cause
null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/powerplay/psm: Fix memory leak in power state init
Commit 902bc65de0b3 ("drm/amdgpu/powerplay/psm: return an error in power
state init") made the power state init function return early in case of
failure to get an entry from the powerplay table, but it missed to clean up
the allocated memory for the current power state before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: led-core: Fix refcount leak in of_led_get()
class_find_device_by_of_node() calls class_find_device(), it will take
the reference, use the put_device() to drop the reference when not need
anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sunplus: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value,
1. the memory allocated in mmc_alloc_host() will be leaked
2. null-ptr-deref will happen when calling mmc_remove_host()
in remove function spmmc_drv_remove() because deleting not
added device.
Fix this by checking the return value of mmc_add_host(). Moreover,
I fixed the error handling path of spmmc_drv_probe() to clean up. |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix memory leak in wx_setup_rx_resources
When wx_alloc_page_pool() failed in wx_setup_rx_resources(), it doesn't
release DMA buffer. Add dma_free_coherent() in the error path to release
the DMA buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: vringh: Fix copy_to_iter return value check
The return value of copy_to_iter can't be negative, check whether the
copied length is equal to the requested length instead of checking for
negative values. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix memory leak when removing provided buffers
When removing provided buffers, io_buffer structs are not being disposed
of, leading to a memory leak. They can't be freed individually, because
they are allocated in page-sized groups. They need to be added to some
free list instead, such as io_buffers_cache. All callers already hold
the lock protecting it, apart from when destroying buffers, so had to
extend the lock there. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: KVM: Fix NULL pointer dereference
After commit 45c7e8af4a5e3f0bea4ac209 ("MIPS: Remove KVM_TE support") we
get a NULL pointer dereference when creating a KVM guest:
[ 146.243409] Starting KVM with MIPS VZ extensions
[ 149.849151] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000300, epc == ffffffffc06356ec, ra == ffffffffc063568c
[ 149.849177] Oops[#1]:
[ 149.849182] CPU: 3 PID: 2265 Comm: qemu-system-mip Not tainted 6.4.0-rc3+ #1671
[ 149.849188] Hardware name: THTF CX TL630 Series/THTF-LS3A4000-7A1000-ML4A, BIOS KL4.1F.TF.D.166.201225.R 12/25/2020
[ 149.849192] $ 0 : 0000000000000000 000000007400cce0 0000000000400004 ffffffff8119c740
[ 149.849209] $ 4 : 000000007400cce1 000000007400cce1 0000000000000000 0000000000000000
[ 149.849221] $ 8 : 000000240058bb36 ffffffff81421ac0 0000000000000000 0000000000400dc0
[ 149.849233] $12 : 9800000102a07cc8 ffffffff80e40e38 0000000000000001 0000000000400dc0
[ 149.849245] $16 : 0000000000000000 9800000106cd0000 9800000106cd0000 9800000100cce000
[ 149.849257] $20 : ffffffffc0632b28 ffffffffc05b31b0 9800000100ccca00 0000000000400000
[ 149.849269] $24 : 9800000106cd09ce ffffffff802f69d0
[ 149.849281] $28 : 9800000102a04000 9800000102a07cd0 98000001106a8000 ffffffffc063568c
[ 149.849293] Hi : 00000335b2111e66
[ 149.849295] Lo : 6668d90061ae0ae9
[ 149.849298] epc : ffffffffc06356ec kvm_vz_vcpu_setup+0xc4/0x328 [kvm]
[ 149.849324] ra : ffffffffc063568c kvm_vz_vcpu_setup+0x64/0x328 [kvm]
[ 149.849336] Status: 7400cce3 KX SX UX KERNEL EXL IE
[ 149.849351] Cause : 1000000c (ExcCode 03)
[ 149.849354] BadVA : 0000000000000300
[ 149.849357] PrId : 0014c004 (ICT Loongson-3)
[ 149.849360] Modules linked in: kvm nfnetlink_queue nfnetlink_log nfnetlink fuse sha256_generic libsha256 cfg80211 rfkill binfmt_misc vfat fat snd_hda_codec_hdmi input_leds led_class snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_pcm snd_timer snd serio_raw xhci_pci radeon drm_suballoc_helper drm_display_helper xhci_hcd ip_tables x_tables
[ 149.849432] Process qemu-system-mip (pid: 2265, threadinfo=00000000ae2982d2, task=0000000038e09ad4, tls=000000ffeba16030)
[ 149.849439] Stack : 9800000000000003 9800000100ccca00 9800000100ccc000 ffffffffc062cef4
[ 149.849453] 9800000102a07d18 c89b63a7ab338e00 0000000000000000 ffffffff811a0000
[ 149.849465] 0000000000000000 9800000106cd0000 ffffffff80e59938 98000001106a8920
[ 149.849476] ffffffff80e57f30 ffffffffc062854c ffffffff811a0000 9800000102bf4240
[ 149.849488] ffffffffc05b0000 ffffffff80e3a798 000000ff78000000 000000ff78000010
[ 149.849500] 0000000000000255 98000001021f7de0 98000001023f0078 ffffffff81434000
[ 149.849511] 0000000000000000 0000000000000000 9800000102ae0000 980000025e92ae28
[ 149.849523] 0000000000000000 c89b63a7ab338e00 0000000000000001 ffffffff8119dce0
[ 149.849535] 000000ff78000010 ffffffff804f3d3c 9800000102a07eb0 0000000000000255
[ 149.849546] 0000000000000000 ffffffff8049460c 000000ff78000010 0000000000000255
[ 149.849558] ...
[ 149.849565] Call Trace:
[ 149.849567] [<ffffffffc06356ec>] kvm_vz_vcpu_setup+0xc4/0x328 [kvm]
[ 149.849586] [<ffffffffc062cef4>] kvm_arch_vcpu_create+0x184/0x228 [kvm]
[ 149.849605] [<ffffffffc062854c>] kvm_vm_ioctl+0x64c/0xf28 [kvm]
[ 149.849623] [<ffffffff805209c0>] sys_ioctl+0xc8/0x118
[ 149.849631] [<ffffffff80219eb0>] syscall_common+0x34/0x58
The root cause is the deletion of kvm_mips_commpage_init() leaves vcpu
->arch.cop0 NULL. So fix it by making cop0 from a pointer to an embedded
object. |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
In the j1939_tp_tx_dat_new() function, an out-of-bounds memory access
could occur during the memcpy() operation if the size of skb->cb is
larger than the size of struct j1939_sk_buff_cb. This is because the
memcpy() operation uses the size of skb->cb, leading to a read beyond
the struct j1939_sk_buff_cb.
Updated the memcpy() operation to use the size of struct
j1939_sk_buff_cb instead of the size of skb->cb. This ensures that the
memcpy() operation only reads the memory within the bounds of struct
j1939_sk_buff_cb, preventing out-of-bounds memory access.
Additionally, add a BUILD_BUG_ON() to check that the size of skb->cb
is greater than or equal to the size of struct j1939_sk_buff_cb. This
ensures that the skb->cb buffer is large enough to hold the
j1939_sk_buff_cb structure.
[mkl: rephrase commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: simplefb: Fix use after free in simplefb_detach_genpds()
The pm_domain cleanup can not be devres managed as it uses struct
simplefb_par which is allocated within struct fb_info by
framebuffer_alloc(). This allocation is explicitly freed by
unregister_framebuffer() in simplefb_remove().
Devres managed cleanup runs after the device remove call and thus can no
longer access struct simplefb_par.
Call simplefb_detach_genpds() explicitly from simplefb_destroy() like
the cleanup functions for clocks and regulators.
Fixes an use after free on M2 Mac mini during
aperture_remove_conflicting_devices() using the downstream asahi kernel
with Debian's kernel config. For unknown reasons this started to
consistently dereference an invalid pointer in v6.16.3 based kernels.
[ 6.736134] BUG: KASAN: slab-use-after-free in simplefb_detach_genpds+0x58/0x220
[ 6.743545] Read of size 4 at addr ffff8000304743f0 by task (udev-worker)/227
[ 6.750697]
[ 6.752182] CPU: 6 UID: 0 PID: 227 Comm: (udev-worker) Tainted: G S 6.16.3-asahi+ #16 PREEMPTLAZY
[ 6.752186] Tainted: [S]=CPU_OUT_OF_SPEC
[ 6.752187] Hardware name: Apple Mac mini (M2, 2023) (DT)
[ 6.752189] Call trace:
[ 6.752190] show_stack+0x34/0x98 (C)
[ 6.752194] dump_stack_lvl+0x60/0x80
[ 6.752197] print_report+0x17c/0x4d8
[ 6.752201] kasan_report+0xb4/0x100
[ 6.752206] __asan_report_load4_noabort+0x20/0x30
[ 6.752209] simplefb_detach_genpds+0x58/0x220
[ 6.752213] devm_action_release+0x50/0x98
[ 6.752216] release_nodes+0xd0/0x2c8
[ 6.752219] devres_release_all+0xfc/0x178
[ 6.752221] device_unbind_cleanup+0x28/0x168
[ 6.752224] device_release_driver_internal+0x34c/0x470
[ 6.752228] device_release_driver+0x20/0x38
[ 6.752231] bus_remove_device+0x1b0/0x380
[ 6.752234] device_del+0x314/0x820
[ 6.752238] platform_device_del+0x3c/0x1e8
[ 6.752242] platform_device_unregister+0x20/0x50
[ 6.752246] aperture_detach_platform_device+0x1c/0x30
[ 6.752250] aperture_detach_devices+0x16c/0x290
[ 6.752253] aperture_remove_conflicting_devices+0x34/0x50
...
[ 6.752343]
[ 6.967409] Allocated by task 62:
[ 6.970724] kasan_save_stack+0x3c/0x70
[ 6.974560] kasan_save_track+0x20/0x40
[ 6.978397] kasan_save_alloc_info+0x40/0x58
[ 6.982670] __kasan_kmalloc+0xd4/0xd8
[ 6.986420] __kmalloc_noprof+0x194/0x540
[ 6.990432] framebuffer_alloc+0xc8/0x130
[ 6.994444] simplefb_probe+0x258/0x2378
...
[ 7.054356]
[ 7.055838] Freed by task 227:
[ 7.058891] kasan_save_stack+0x3c/0x70
[ 7.062727] kasan_save_track+0x20/0x40
[ 7.066565] kasan_save_free_info+0x4c/0x80
[ 7.070751] __kasan_slab_free+0x6c/0xa0
[ 7.074675] kfree+0x10c/0x380
[ 7.077727] framebuffer_release+0x5c/0x90
[ 7.081826] simplefb_destroy+0x1b4/0x2c0
[ 7.085837] put_fb_info+0x98/0x100
[ 7.089326] unregister_framebuffer+0x178/0x320
[ 7.093861] simplefb_remove+0x3c/0x60
[ 7.097611] platform_remove+0x60/0x98
[ 7.101361] device_remove+0xb8/0x160
[ 7.105024] device_release_driver_internal+0x2fc/0x470
[ 7.110256] device_release_driver+0x20/0x38
[ 7.114529] bus_remove_device+0x1b0/0x380
[ 7.118628] device_del+0x314/0x820
[ 7.122116] platform_device_del+0x3c/0x1e8
[ 7.126302] platform_device_unregister+0x20/0x50
[ 7.131012] aperture_detach_platform_device+0x1c/0x30
[ 7.136157] aperture_detach_devices+0x16c/0x290
[ 7.140779] aperture_remove_conflicting_devices+0x34/0x50
... |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix race between balance and cancel/pause
Syzbot reported a panic that looks like this:
assertion failed: fs_info->exclusive_operation == BTRFS_EXCLOP_BALANCE_PAUSED, in fs/btrfs/ioctl.c:465
------------[ cut here ]------------
kernel BUG at fs/btrfs/messages.c:259!
RIP: 0010:btrfs_assertfail+0x2c/0x30 fs/btrfs/messages.c:259
Call Trace:
<TASK>
btrfs_exclop_balance fs/btrfs/ioctl.c:465 [inline]
btrfs_ioctl_balance fs/btrfs/ioctl.c:3564 [inline]
btrfs_ioctl+0x531e/0x5b30 fs/btrfs/ioctl.c:4632
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The reproducer is running a balance and a cancel or pause in parallel.
The way balance finishes is a bit wonky, if we were paused we need to
save the balance_ctl in the fs_info, but clear it otherwise and cleanup.
However we rely on the return values being specific errors, or having a
cancel request or no pause request. If balance completes and returns 0,
but we have a pause or cancel request we won't do the appropriate
cleanup, and then the next time we try to start a balance we'll trip
this ASSERT.
The error handling is just wrong here, we always want to clean up,
unless we got -ECANCELLED and we set the appropriate pause flag in the
exclusive op. With this patch the reproducer ran for an hour without
tripping, previously it would trip in less than a few minutes. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle case when repair happens with dev-replace
[BUG]
There is a bug report that a BUG_ON() in btrfs_repair_io_failure()
(originally repair_io_failure() in v6.0 kernel) got triggered when
replacing a unreliable disk:
BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3
kernel BUG at fs/btrfs/extent_io.c:2380!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2
Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs]
Call Trace:
<TASK>
clean_io_failure+0x14d/0x180 [btrfs]
end_bio_extent_readpage+0x412/0x6e0 [btrfs]
? __switch_to+0x106/0x420
process_one_work+0x1c7/0x380
worker_thread+0x4d/0x380
? rescuer_thread+0x3a0/0x3a0
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
[CAUSE]
Before the BUG_ON(), we got some read errors from the replace target
first, note the mirror number (3, which is beyond RAID1 duplication,
thus it's read from the replace target device).
Then at the BUG_ON() location, we are trying to writeback the repaired
sectors back the failed device.
The check looks like this:
ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical,
&map_length, &bioc, mirror_num);
if (ret)
goto out_counter_dec;
BUG_ON(mirror_num != bioc->mirror_num);
But inside btrfs_map_block(), we can modify bioc->mirror_num especially
for dev-replace:
if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 &&
!need_full_stripe(op) && dev_replace->tgtdev != NULL) {
ret = get_extra_mirror_from_replace(fs_info, logical, *length,
dev_replace->srcdev->devid,
&mirror_num,
&physical_to_patch_in_first_stripe);
patch_the_first_stripe_for_dev_replace = 1;
}
Thus if we're repairing the replace target device, we're going to
trigger that BUG_ON().
But in reality, the read failure from the replace target device may be
that, our replace hasn't reached the range we're reading, thus we're
reading garbage, but with replace running, the range would be properly
filled later.
Thus in that case, we don't need to do anything but let the replace
routine to handle it.
[FIX]
Instead of a BUG_ON(), just skip the repair if we're repairing the
device replace target device. |
| In the Linux kernel, the following vulnerability has been resolved:
ping: Fix potentail NULL deref for /proc/net/icmp.
After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid
of rwlock"), we use RCU for ping sockets, but we should use spinlock
for /proc/net/icmp to avoid a potential NULL deref mentioned in
the previous patch.
Let's go back to using spinlock there.
Note we can convert ping sockets to use hlist instead of hlist_nulls
because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: ensure allocated iovec gets cleared for early failure
A previous commit reused the recyling infrastructure for early cleanup,
but this is not enough for the case where our internal caches have
overflowed. If this happens, then the allocated iovec can get leaked if
the request is also aborted early.
Reinstate the previous forced free of the iovec for that situation. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Destroy target device if coalesced MMIO unregistration fails
Destroy and free the target coalesced MMIO device if unregistering said
device fails. As clearly noted in the code, kvm_io_bus_unregister_dev()
does not destroy the target device.
BUG: memory leak
unreferenced object 0xffff888112a54880 (size 64):
comm "syz-executor.2", pid 5258, jiffies 4297861402 (age 14.129s)
hex dump (first 32 bytes):
38 c7 67 15 00 c9 ff ff 38 c7 67 15 00 c9 ff ff 8.g.....8.g.....
e0 c7 e1 83 ff ff ff ff 00 30 67 15 00 c9 ff ff .........0g.....
backtrace:
[<0000000006995a8a>] kmalloc include/linux/slab.h:556 [inline]
[<0000000006995a8a>] kzalloc include/linux/slab.h:690 [inline]
[<0000000006995a8a>] kvm_vm_ioctl_register_coalesced_mmio+0x8e/0x3d0 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:150
[<00000000022550c2>] kvm_vm_ioctl+0x47d/0x1600 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3323
[<000000008a75102f>] vfs_ioctl fs/ioctl.c:46 [inline]
[<000000008a75102f>] file_ioctl fs/ioctl.c:509 [inline]
[<000000008a75102f>] do_vfs_ioctl+0xbab/0x1160 fs/ioctl.c:696
[<0000000080e3f669>] ksys_ioctl+0x76/0xa0 fs/ioctl.c:713
[<0000000059ef4888>] __do_sys_ioctl fs/ioctl.c:720 [inline]
[<0000000059ef4888>] __se_sys_ioctl fs/ioctl.c:718 [inline]
[<0000000059ef4888>] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718
[<000000006444fa05>] do_syscall_64+0x9f/0x4e0 arch/x86/entry/common.c:290
[<000000009a4ed50b>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
BUG: leak checking failed |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Silence a warning in btf_type_id_size()
syzbot reported a warning in [1] with the following stacktrace:
WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
Call Trace:
<TASK>
map_check_btf kernel/bpf/syscall.c:1024 [inline]
map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198
__sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040
__do_sys_bpf kernel/bpf/syscall.c:5162 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5160 [inline]
__x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With the following btf
[1] DECL_TAG 'a' type_id=4 component_idx=-1
[2] PTR '(anon)' type_id=0
[3] TYPE_TAG 'a' type_id=2
[4] VAR 'a' type_id=3, linkage=static
and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG),
the following WARN_ON_ONCE in btf_type_id_size() is triggered:
if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) &&
!btf_type_is_var(size_type)))
return NULL;
Note that 'return NULL' is the correct behavior as we don't want
a DECL_TAG type to be used as a btf_{key,value}_type_id even
for the case like 'DECL_TAG -> STRUCT'. So there
is no correctness issue here, we just want to silence warning.
To silence the warning, I added DECL_TAG as one of kinds in
btf_type_nosize() which will cause btf_type_id_size() returning
NULL earlier without the warning.
[1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/ |
