Export limit exceeded: 420998 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26246 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-35866 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-04-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_dump_full_key() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF. | ||||
| CVE-2024-46725 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-04-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix out-of-bounds write warning Check the ring type value to fix the out-of-bounds write warning | ||||
| CVE-2013-2596 | 4 Linux, Motorola, Qualcomm and 1 more | 10 Linux Kernel, Android, Atrix Hd and 7 more | 2026-04-21 | 7.8 High |
| Integer overflow in the fb_mmap function in drivers/video/fbmem.c in the Linux kernel before 3.8.9, as used in a certain Motorola build of Android 4.1.2 and other products, allows local users to create a read-write memory mapping for the entirety of kernel memory, and consequently gain privileges, via crafted /dev/graphics/fb0 mmap2 system calls, as demonstrated by the Motochopper pwn program. | ||||
| CVE-2017-1000253 | 3 Centos, Linux, Redhat | 8 Centos, Linux Kernel, Enterprise Linux and 5 more | 2026-04-21 | 7.8 High |
| Linux distributions that have not patched their long-term kernels with https://git.kernel.org/linus/a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (committed on April 14, 2015). This kernel vulnerability was fixed in April 2015 by commit a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (backported to Linux 3.10.77 in May 2015), but it was not recognized as a security threat. With CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE enabled, and a normal top-down address allocation strategy, load_elf_binary() will attempt to map a PIE binary into an address range immediately below mm->mmap_base. Unfortunately, load_elf_ binary() does not take account of the need to allocate sufficient space for the entire binary which means that, while the first PT_LOAD segment is mapped below mm->mmap_base, the subsequent PT_LOAD segment(s) end up being mapped above mm->mmap_base into the are that is supposed to be the "gap" between the stack and the binary. | ||||
| CVE-2016-5198 | 5 Apple, Google, Linux and 2 more | 9 Macos, Android, Chrome and 6 more | 2026-04-21 | 8.8 High |
| V8 in Google Chrome prior to 54.0.2840.90 for Linux, and 54.0.2840.85 for Android, and 54.0.2840.87 for Windows and Mac included incorrect optimisation assumptions, which allowed a remote attacker to perform arbitrary read/write operations, leading to code execution, via a crafted HTML page. | ||||
| CVE-2017-5030 | 6 Apple, Debian, Google and 3 more | 10 Macos, Debian Linux, Android and 7 more | 2026-04-21 | 8.8 High |
| Incorrect handling of complex species in V8 in Google Chrome prior to 57.0.2987.98 for Linux, Windows, and Mac and 57.0.2987.108 for Android allowed a remote attacker to execute arbitrary code via a crafted HTML page. | ||||
| CVE-2017-5070 | 5 Apple, Google, Linux and 2 more | 9 Macos, Android, Chrome and 6 more | 2026-04-21 | 8.8 High |
| Type confusion in V8 in Google Chrome prior to 59.0.3071.86 for Linux, Windows, and Mac, and 59.0.3071.92 for Android, allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. | ||||
| CVE-2014-3153 | 6 Canonical, Linux, Opensuse and 3 more | 13 Ubuntu Linux, Linux Kernel, Opensuse and 10 more | 2026-04-21 | 7.8 High |
| The futex_requeue function in kernel/futex.c in the Linux kernel through 3.14.5 does not ensure that calls have two different futex addresses, which allows local users to gain privileges via a crafted FUTEX_REQUEUE command that facilitates unsafe waiter modification. | ||||
| CVE-2016-5195 | 7 Canonical, Debian, Fedoraproject and 4 more | 24 Ubuntu Linux, Debian Linux, Fedora and 21 more | 2026-04-21 | 7.0 High |
| Race condition in mm/gup.c in the Linux kernel 2.x through 4.x before 4.8.3 allows local users to gain privileges by leveraging incorrect handling of a copy-on-write (COW) feature to write to a read-only memory mapping, as exploited in the wild in October 2016, aka "Dirty COW." | ||||
| CVE-2010-3904 | 6 Canonical, Linux, Opensuse and 3 more | 8 Ubuntu Linux, Linux Kernel, Opensuse and 5 more | 2026-04-21 | 7.8 High |
| The rds_page_copy_user function in net/rds/page.c in the Reliable Datagram Sockets (RDS) protocol implementation in the Linux kernel before 2.6.36 does not properly validate addresses obtained from user space, which allows local users to gain privileges via crafted use of the sendmsg and recvmsg system calls. | ||||
| CVE-2025-71230 | 1 Linux | 1 Linux Kernel | 2026-04-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfs: ensure sb->s_fs_info is always cleaned up When hfs was converted to the new mount api a bug was introduced by changing the allocation pattern of sb->s_fs_info. If setup_bdev_super() fails after a new superblock has been allocated by sget_fc(), but before hfs_fill_super() takes ownership of the filesystem-specific s_fs_info data it was leaked. Fix this by freeing sb->s_fs_info in hfs_kill_super(). | ||||
| CVE-2025-71237 | 1 Linux | 1 Linux Kernel | 2026-04-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: Fix potential block overflow that cause system hang When a user executes the FITRIM command, an underflow can occur when calculating nblocks if end_block is too small. Since nblocks is of type sector_t, which is u64, a negative nblocks value will become a very large positive integer. This ultimately leads to the block layer function __blkdev_issue_discard() taking an excessively long time to process the bio chain, and the ns_segctor_sem lock remains held for a long period. This prevents other tasks from acquiring the ns_segctor_sem lock, resulting in the hang reported by syzbot in [1]. If the ending block is too small, typically if it is smaller than 4KiB range, depending on the usage of the segment 0, it may be possible to attempt a discard request beyond the device size causing the hang. Exiting successfully and assign the discarded size (0 in this case) to range->len. Although the start and len values in the user input range are too small, a conservative strategy is adopted here to safely ignore them, which is equivalent to a no-op; it will not perform any trimming and will not throw an error. [1] task:segctord state:D stack:28968 pid:6093 tgid:6093 ppid:2 task_flags:0x200040 flags:0x00080000 Call Trace: rwbase_write_lock+0x3dd/0x750 kernel/locking/rwbase_rt.c:272 nilfs_transaction_lock+0x253/0x4c0 fs/nilfs2/segment.c:357 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2569 [inline] nilfs_segctor_thread+0x6ec/0xe00 fs/nilfs2/segment.c:2684 [ryusuke: corrected part of the commit message about the consequences] | ||||
| CVE-2025-39822 | 1 Linux | 1 Linux Kernel | 2026-04-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: fix signedness in this_len calculation When importing and using buffers, buf->len is considered unsigned. However, buf->len is converted to signed int when committing. This can lead to unexpected behavior if the buffer is large enough to be interpreted as a negative value. Make min_t calculation unsigned. | ||||
| CVE-2025-71233 | 1 Linux | 1 Linux Kernel | 2026-04-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Avoid creating sub-groups asynchronously The asynchronous creation of sub-groups by a delayed work could lead to a NULL pointer dereference when the driver directory is removed before the work completes. The crash can be easily reproduced with the following commands: # cd /sys/kernel/config/pci_ep/functions/pci_epf_test # for i in {1..20}; do mkdir test && rmdir test; done BUG: kernel NULL pointer dereference, address: 0000000000000088 ... Call Trace: configfs_register_group+0x3d/0x190 pci_epf_cfs_work+0x41/0x110 process_one_work+0x18f/0x350 worker_thread+0x25a/0x3a0 Fix this issue by using configfs_add_default_group() API which does not have the deadlock problem as configfs_register_group() and does not require the delayed work handler. [mani: slightly reworded the description and added stable list] | ||||
| CVE-2025-38562 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-04-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference error in generate_encryptionkey If client send two session setups with krb5 authenticate to ksmbd, null pointer dereference error in generate_encryptionkey could happen. sess->Preauth_HashValue is set to NULL if session is valid. So this patch skip generate encryption key if session is valid. | ||||
| CVE-2025-40016 | 1 Linux | 1 Linux Kernel | 2026-04-20 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero unique ID. ``` Each Unit and Terminal within the video function is assigned a unique identification number, the Unit ID (UID) or Terminal ID (TID), contained in the bUnitID or bTerminalID field of the descriptor. The value 0x00 is reserved for undefined ID, ``` If we add a new entity with id 0 or a duplicated ID, it will be marked as UVC_INVALID_ENTITY_ID. In a previous attempt commit 3dd075fe8ebb ("media: uvcvideo: Require entities to have a non-zero unique ID"), we ignored all the invalid units, this broke a lot of non-compatible cameras. Hopefully we are more lucky this time. This also prevents some syzkaller reproducers from triggering warnings due to a chain of entities referring to themselves. In one particular case, an Output Unit is connected to an Input Unit, both with the same ID of 1. But when looking up for the source ID of the Output Unit, that same entity is found instead of the input entity, which leads to such warnings. In another case, a backward chain was considered finished as the source ID was 0. Later on, that entity was found, but its pads were not valid. Here is a sample stack trace for one of those cases. [ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd [ 20.830206] usb 1-1: Using ep0 maxpacket: 8 [ 20.833501] usb 1-1: config 0 descriptor?? [ 21.038518] usb 1-1: string descriptor 0 read error: -71 [ 21.038893] usb 1-1: Found UVC 0.00 device <unnamed> (2833:0201) [ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized! [ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized! [ 21.042218] ------------[ cut here ]------------ [ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0 [ 21.043195] Modules linked in: [ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444 [ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 21.044639] Workqueue: usb_hub_wq hub_event [ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0 [ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00 [ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246 [ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1 [ 21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290 [ 21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000 [ 21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003 [ 21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000 [ 21.049648] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 21.050271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0 [ 21.051136] PKRU: 55555554 [ 21.051331] Call Trace: [ 21.051480] <TASK> [ 21.051611] ? __warn+0xc4/0x210 [ 21.051861] ? media_create_pad_link+0x2c4/0x2e0 [ 21.052252] ? report_bug+0x11b/0x1a0 [ 21.052540] ? trace_hardirqs_on+0x31/0x40 [ 21.052901] ? handle_bug+0x3d/0x70 [ 21.053197] ? exc_invalid_op+0x1a/0x50 [ 21.053511] ? asm_exc_invalid_op+0x1a/0x20 [ 21.053924] ? media_create_pad_link+0x91/0x2e0 [ 21.054364] ? media_create_pad_link+0x2c4/0x2e0 [ 21.054834] ? media_create_pad_link+0x91/0x2e0 [ 21.055131] ? _raw_spin_unlock+0x1e/0x40 [ 21.055441] ? __v4l2_device_register_subdev+0x202/0x210 [ 21.055837] uvc_mc_register_entities+0x358/0x400 [ 21.056144] uvc_register_chains+0x1 ---truncated--- | ||||
| CVE-2025-40103 | 1 Linux | 1 Linux Kernel | 2026-04-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix refcount leak for cifs_sb_tlink Fix three refcount inconsistency issues related to `cifs_sb_tlink`. Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to be called after successful calls to `cifs_sb_tlink()`. Three calls fail to update refcount accordingly, leading to possible resource leaks. | ||||
| CVE-2026-23106 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: timekeeping: Adjust the leap state for the correct auxiliary timekeeper When __do_ajdtimex() was introduced to handle adjtimex for any timekeeper, this reference to tk_core was not updated. When called on an auxiliary timekeeper, the core timekeeper would be updated incorrectly. This gets caught by the lock debugging diagnostics because the timekeepers sequence lock gets written to without holding its associated spinlock: WARNING: include/linux/seqlock.h:226 at __do_adjtimex+0x394/0x3b0, CPU#2: test/125 aux_clock_adj (kernel/time/timekeeping.c:2979) __do_sys_clock_adjtime (kernel/time/posix-timers.c:1161 kernel/time/posix-timers.c:1173) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) Update the correct auxiliary timekeeper. | ||||
| CVE-2026-23065 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: Fix memory leak in wbrf_record() The tmp buffer is allocated using kcalloc() but is not freed if acpi_evaluate_dsm() fails. This causes a memory leak in the error path. Fix this by explicitly freeing the tmp buffer in the error handling path of acpi_evaluate_dsm(). | ||||
| CVE-2026-23018 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: release path before initializing extent tree in btrfs_read_locked_inode() In btrfs_read_locked_inode() we are calling btrfs_init_file_extent_tree() while holding a path with a read locked leaf from a subvolume tree, and btrfs_init_file_extent_tree() may do a GFP_KERNEL allocation, which can trigger reclaim. This can create a circular lock dependency which lockdep warns about with the following splat: [6.1433] ====================================================== [6.1574] WARNING: possible circular locking dependency detected [6.1583] 6.18.0+ #4 Tainted: G U [6.1591] ------------------------------------------------------ [6.1599] kswapd0/117 is trying to acquire lock: [6.1606] ffff8d9b6333c5b8 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1625] but task is already holding lock: [6.1633] ffffffffa4ab8ce0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x195/0xc60 [6.1646] which lock already depends on the new lock. [6.1657] the existing dependency chain (in reverse order) is: [6.1667] -> #2 (fs_reclaim){+.+.}-{0:0}: [6.1677] fs_reclaim_acquire+0x9d/0xd0 [6.1685] __kmalloc_cache_noprof+0x59/0x750 [6.1694] btrfs_init_file_extent_tree+0x90/0x100 [6.1702] btrfs_read_locked_inode+0xc3/0x6b0 [6.1710] btrfs_iget+0xbb/0xf0 [6.1716] btrfs_lookup_dentry+0x3c5/0x8e0 [6.1724] btrfs_lookup+0x12/0x30 [6.1731] lookup_open.isra.0+0x1aa/0x6a0 [6.1739] path_openat+0x5f7/0xc60 [6.1746] do_filp_open+0xd6/0x180 [6.1753] do_sys_openat2+0x8b/0xe0 [6.1760] __x64_sys_openat+0x54/0xa0 [6.1768] do_syscall_64+0x97/0x3e0 [6.1776] entry_SYSCALL_64_after_hwframe+0x76/0x7e [6.1784] -> #1 (btrfs-tree-00){++++}-{3:3}: [6.1794] lock_release+0x127/0x2a0 [6.1801] up_read+0x1b/0x30 [6.1808] btrfs_search_slot+0x8e0/0xff0 [6.1817] btrfs_lookup_inode+0x52/0xd0 [6.1825] __btrfs_update_delayed_inode+0x73/0x520 [6.1833] btrfs_commit_inode_delayed_inode+0x11a/0x120 [6.1842] btrfs_log_inode+0x608/0x1aa0 [6.1849] btrfs_log_inode_parent+0x249/0xf80 [6.1857] btrfs_log_dentry_safe+0x3e/0x60 [6.1865] btrfs_sync_file+0x431/0x690 [6.1872] do_fsync+0x39/0x80 [6.1879] __x64_sys_fsync+0x13/0x20 [6.1887] do_syscall_64+0x97/0x3e0 [6.1894] entry_SYSCALL_64_after_hwframe+0x76/0x7e [6.1903] -> #0 (&delayed_node->mutex){+.+.}-{3:3}: [6.1913] __lock_acquire+0x15e9/0x2820 [6.1920] lock_acquire+0xc9/0x2d0 [6.1927] __mutex_lock+0xcc/0x10a0 [6.1934] __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1944] btrfs_evict_inode+0x20b/0x4b0 [6.1952] evict+0x15a/0x2f0 [6.1958] prune_icache_sb+0x91/0xd0 [6.1966] super_cache_scan+0x150/0x1d0 [6.1974] do_shrink_slab+0x155/0x6f0 [6.1981] shrink_slab+0x48e/0x890 [6.1988] shrink_one+0x11a/0x1f0 [6.1995] shrink_node+0xbfd/0x1320 [6.1002] balance_pgdat+0x67f/0xc60 [6.1321] kswapd+0x1dc/0x3e0 [6.1643] kthread+0xff/0x240 [6.1965] ret_from_fork+0x223/0x280 [6.1287] ret_from_fork_asm+0x1a/0x30 [6.1616] other info that might help us debug this: [6.1561] Chain exists of: &delayed_node->mutex --> btrfs-tree-00 --> fs_reclaim [6.1503] Possible unsafe locking scenario: [6.1110] CPU0 CPU1 [6.1411] ---- ---- [6.1707] lock(fs_reclaim); [6.1998] lock(btrfs-tree-00); [6.1291] lock(fs_reclaim); [6.1581] lock(&del ---truncated--- | ||||