| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm()
In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to
&matrix_mdev->pqap_hook before the update locks are acquired and the
mdev list is checked for a conflicting assignment. If another mdev is
already attached to the same KVM instance, the function returns -EPERM
without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook
pointing at the failing matrix_mdev instead of the mdev that legitimately
owns the KVM.
Since matrix_mdev->kvm is never set on this error path,
vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev
is later closed. If matrix_mdev is subsequently freed, any PQAP
instruction executed by the guest will dereference the stale pointer
through pqap_hook_rwsem, resulting in a use-after-free.
Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm()
function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check
for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine
whether it belongs to another mdev. This will alleviate the need to iterate
the matrix_dev->mdev_list list to see if the kvm object is assigned to
another mdev.This was introduced in v3 to alleviate the need to take the
mdevs_lock while iterating the list; however, this did not prevent a
potential race condition.
The pqap_hook_rwsem(write) is now performed inside
get_update_locks_for_kvm(), which is updated to acquire
pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering
is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem
in read mode while srcu is held under vcpu->mutex, establishing the
dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read).
The pqap_hook_rwsem is now released inside the
release_update_locks_for_kvm(), which is updated to release
pqap_hook_rwsem(write) between mdevs_lock and kvm->lock.
Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved
after release_update_locks_for_kvm(). Previously it was called while
kvm->lock was held; if it were ever the last reference, kvm_destroy_vm()
would run under kvm->lock, which would deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects
In order to traverse or add/remove ap_matrix_mdev objects in the
matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held.
There are two functions that access the list without holding the mutex:
vfio_ap_mdev_probe function
~~~~~~~~~~~~~~~~~~~~~~~~~~~
The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock
mutex to guard the add of a newly created ap_matrix_mdev object to the
matrix_dev->mdev_list. This mutex does not protect list access; its purpose
is to guard against concurrent access to fields contained in an
ap_matrix_mdev object. This could lead to kernel memory corruption or
use-after-free if another mdev is created or removed concurrently.
The adding of an ap_matrix_mdev object to matrix_dev->mdev_list
is now guarded by the matrix_dev->guests_lock which is the correct
way to protect against concurrent mdev_list access.
Also removed the following two lines of code because the matrix_mdev is
allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger
and cfg_chg_trigger are already zero-initialised when the struct is
allocated before the call to vfio_register_emulated_iommu_dev. This
prevents a window whereby these triggers are set to NULL after
the device is exposed to userspace.
matrix_mdev->req_trigger = NULL;
matrix_mdev->cfg_chg_trigger = NULL;
vfio_ap_mdev_for_queue function
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The status_show function that supports display of the status attribute of
the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue
function which iterates the matrix_dev->mdev_list to find the object
representing the queue device whose status is to be displayed. In order to
traverse this list, the matrix_dev->guests_lock mutex must be held.
To fix this, the guests_lock mutex is taken prior to taking the
matrix_dev->mdevs_lock mutex in the status_show function. It is taken
there rather than the vfio_ap_mdev_for_queue function - where it is
needed - because it must be taken prior to the mdevs_lock mutex in order to
adhere to the proper locking order and prevent a lockdep splat; also
because the mdevs_lock is needed there to access fields within
the matrix_mdev object in that function.
See the vfio-ap-locking.rst in the linux kernel tree. |
| In the Linux kernel, the following vulnerability has been resolved:
media: saa7164: fix cleanup on resource allocation failure
saa7164_dev_setup() adds the device to the global saa7164_devlist before
requesting the PCI BAR memory regions.
If get_resources() fails, saa7164_dev_setup() decrements the device count
and returns an error, but leaves the device on saa7164_devlist. The probe
error path then frees the device, leaving a dangling entry on the global
list.
Reuse the existing MMIO mapping error path to remove the device from
saa7164_devlist and decrement the device count before returning.
Also release BAR0 if it was successfully requested but the BAR2 request
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Quiesce response IRQ before freeing request queue
qla2xxx_delete_qpair() deletes the request queue before the response
queue. qla25xx_delete_req_que() frees the request queue memory
(kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is
only released later, in qla25xx_free_rsp_que(). In that window the
response interrupt can still fire, qla2xxx_msix_rsp_q() queues
qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue()
dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the
status path), a use-after-free.
The cancel_work_sync() added for the qpair teardown lives in the
response free path, which runs after the request queue is already freed,
so it does not protect rsp->req.
Release the response-queue interrupt and flush qpair->q_work before
deleting the request queue, so no late completion can reach the freed
request queue. Clearing have_irq makes the subsequent
qla25xx_free_rsp_que() skip its free_irq(), and the firmware
queue-delete order (request then response) is preserved; the
request-delete mailbox completes on the default vector and is unaffected
by dropping the qpair response interrupt early. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add TLB flush after MES queue eviction/suspension
MES (Micro Engine Scheduler) does not perform heavy-weight TLB
invalidation after unmapping queues, unlike HWS which does this
automatically. This causes a race condition where in-flight DMA
descriptors can access memory that has been unmapped, leading to page
faults and GPU queue hangs during SVM page migration.
The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest
failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU
compute queue hangs with packets submitted but never consumed.
Add kfd_flush_tlb() calls after MES queue removal in two locations:
- evict_process_queues_cpsch(): after all queues removed during eviction
- suspend_queues(): after debug/criu queue suspension (with mem_fence barrier)
This ensures all in-flight memory accesses from unmapped queues are
flushed before memory is freed or migrated.
(cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix error path at svm_migrate_copy_to_ram
If page migration from device to sys ram fails for some reasons driver needs
release and unlock allocated system pages. To do that driver should use page
physical address, or pfn, then get struct page*. Current driver uses dma
address(for adev) that is not correct with IOMMU enabled, or even in general.
The patch releases and unlocks allocated system pages based on where migration
failed by struct page* of sys ram pages. Also dma_unmap correspodent system
ram pages at error path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: unsubscribe the channel-kill event before the fence context
nouveau_channel_del() tears the fence context down first and only drops
the channel-kill subscription later, in the middle of the nvif object
teardown:
if (chan->fence)
nouveau_fence(chan->cli->drm)->context_del(chan);
...
nvif_object_dtor(&chan->vram);
nvif_event_dtor(&chan->kill);
The subscribed handler is nouveau_channel_killed(), which calls
nouveau_channel_kill() and from there nouveau_fence_context_kill() on
chan->fence. A kill event delivered in that window takes fctx->lock and
walks fctx->pending on a fence context that context_del() has already
freed.
Nothing reaches this below Fermi today, because the subscription is
gated on FERMI_CHANNEL_GPFIFO and nothing kills a channel there. On
Fermi and newer the window is real but narrow, since a kill has to land
exactly while the channel is being destroyed. That is reason enough on
its own, which is why this carries a Fixes: tag. The last patch in this
series subscribes Tesla channels as well; nothing kills those today, so
it does not widen the exposure now, but it is the groundwork for a
recovery path that would, and the ordering is better fixed before that
lands than alongside it.
Drop the subscription before anything it depends on is torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix tree connection use-after-free in smb2_tree_connect()
ksmbd_tree_conn_connect() publishes a new tree connection in
sess->tree_conns with a single reference and returns its pointer to
smb2_tree_connect(). The handler continues to initialize the object and
build the response after publication. A concurrent session logoff can
erase the connection and drop that reference, freeing the object while
the handler still uses it.
BUG: KASAN: slab-use-after-free in smb2_tree_connect+0xe3d/0xf90
smb2_tree_connect (fs/smb/server/smb2pdu.c:2872)
handle_ksmbd_work
process_one_work
worker_thread
kthread
After xa_store() succeeds, take a second reference before releasing
tree_conns_lock. The original reference belongs to the xarray entry and
the second belongs to the creating smb2_tree_connect() handler.
Keep the references balanced in every path:
- On normal exit or an error after publication, smb2_tree_connect()
drops its creator reference. Error cleanup also calls
ksmbd_tree_conn_disconnect(), which drops the xarray reference only if
it removes the exact entry.
- SMB2 TREE_DISCONNECT uses the same helper to remove the entry and drop
its xarray reference. The request's existing lookup reference remains
owned by the request and is released by the existing cleanup.
- Session LOGOFF removes each entry and drops its xarray reference. If
it wins the race, later cleanup sees that the entry is gone and does
not drop that reference again.
To enforce this ownership, claim the disconnected state and erase the
exact entry atomically under tree_conns_lock. This guarantees one drop
for the xarray reference and one drop by each in-flight user, regardless
of which teardown path wins. If logoff removes the entry before
initialization completes, fail the connect instead of marking the
detached object TREE_CONNECTED. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix responder UAF on IB_QP_MAX_DEST_RD_ATOMIC modify_qp
rxe_qp_from_attr() handles IB_QP_MAX_DEST_RD_ATOMIC outside the
IB_QP_STATE path, so it holds no state_lock and runs while the responder
task rxe_receiver() (recv_task on rxe_wq) is live. A modify_qp() setting
only that attribute calls free_rd_atomic_resources() then
alloc_rd_atomic_resources(), swapping qp->resp.resources[] while
rxe_prepare_res()/find_resource() walk it; free_rd_atomic_resources()
also leaves the cached pointer qp->resp.res dangling. A local
unprivileged user can race the free/realloc into a use-after-free in
rxe_receiver() (local DoS).
Drain recv_task around the swap with rxe_disable_task()/rxe_enable_task(),
as rxe_qp_reset() already does when tearing this array down, re-enabling
only after alloc_rd_atomic_resources() succeeds so the responder never
resumes against a NULL qp->resp.resources on the ENOMEM path. Also clear
qp->resp.res in free_rd_atomic_resources(), like the rxe_resp.c
completion paths.
Reproduced under KASAN; the slab-use-after-free in rxe_receiver() is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: xilinx: Shutdown and free rx mailbox channel
A mbox rx channel is requested using mbox_request_channel_byname() in
probe. In remove callback, the rx mailbox channel is cleaned up when the
rx_chan is NULL due to incorrect condition check. The mailbox channel is
not shutdown and it can receive messages even after the device removal.
This leads to use after free. Also the channel resources are not freed.
Fix this by checking the rx_chan correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data
The OSS sequencer processes the input MIDI bytes into a sequencer
event to be dispatched later (in snd_seq_oss_midi_putc() called from
snd_seq_oss_process_event()). When it's a SysEx data, the event
record contains data.ext.ptr pointer to the original SysEx bytes, and
the referred data is copied into the pool afterwards at dispatching.
The problem is that, if the sequencer port gets closed concurrently
before the dispatch, the OSS sequencer core also releases the
resources (in snd_seq_oss_midi_check_exit_port()), while the pending
event may hold a stale pointer, eventually leading to a UAF at a later
dispatch.
Fortunately, there is already a refcounting mechanism (snd_use_lock_t)
for the OSS MIDI device access, and for addressing the issue above, we
just need to extend the refcount until the event gets dispatched.
This patch extends snd_seq_oss_process_event() to give back the
refcount object, which is in turn released after calling the sequencer
dispatcher with the given event in the caller side.
According to the original report, KASAN report as below:
KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470
RIP: 0033:0x7f2cb66a6340
Read of size 6
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_seq_event_dup+0x40c/0x470 (?:?)
kasan_check_range+0x10c/0x1c0 (?:?)
__asan_memcpy+0x27/0x70 (?:?)
snd_seq_event_dup+0x9/0x470 (?:?)
snd_seq_client_enqueue_event+0x139/0x240 (?:?)
_raw_spin_unlock_irqrestore+0x4b/0x60 (?:?)
snd_seq_kernel_client_enqueue+0x102/0x120 (?:?)
snd_seq_oss_write+0x416/0x4e0 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
odev_write+0x3b/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
__mutex_unlock_slowpath+0x129/0x510 (?:?)
ksys_write+0xe1/0x180 (?:?)
mutex_unlock+0x16/0x20 (?:?)
odev_ioctl+0x65/0xc0 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy()
TIPC UDP media bearer teardown calls dst_cache_destroy() on its
replicast caches before calling synchronize_net() to wait for
concurrent RCU readers (transmitters) to finish:
static void cleanup_bearer(struct work_struct *work)
{
...
list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) {
dst_cache_destroy(&rcast->dst_cache);
list_del_rcu(&rcast->list);
kfree_rcu(rcast, rcu);
}
...
dst_cache_destroy(&ub->rcast.dst_cache);
udp_tunnel_sock_release(ub->sk);
synchronize_net();
...
}
This is highly buggy because dst_cache_destroy() immediately frees the
per-CPU cache memory (free_percpu()) and releases the cached dst
entries without any synchronization.
If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another
CPU under RCU protection, it can call dst_cache_get() concurrently,
leading to:
1. Use-After-Free on the per-CPU cache pointer itself (crash).
2. "rcuref - imbalanced put()" warning if it attempts to release a
dst that was concurrently released by dst_cache_destroy().
Furthermore, calling kfree(ub) immediately after synchronize_net() without
closing the socket first (or waiting after closing it) leaves a window
where a concurrent receiver (tipc_udp_recv()) could start after
synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs.
To fix this, we must defer dst_cache_destroy() and kfree(ub) until after
we have ensured that no more readers can see the bearer/socket and all
existing readers have finished:
1. Defer rcast entry destruction (both dst_cache_destroy() and kfree())
to an RCU callback using call_rcu_hurry().
Using call_rcu_hurry() ensures the dst entries are released quickly.
2. Release the bearer socket using udp_tunnel_sock_release() (stops
new receive readers).
3. Call synchronize_net() to wait for all outstanding RCU readers
(both transmit and receive) to finish.
4. Now that it is safe, call dst_cache_destroy() on the main bearer
cache, and free ub.
Note: 3) and 4) can be changed later in net-next to also use
call_rcu_hurry() and get rid of the synchronize_net() latency. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: hold L2CAP conn across debugfs control
get_l2cap_conn() looks up an LE hci_conn under hdev protection, but
then drops that protection before reading hcon->l2cap_data and before
lowpan_control_write() later dereferences conn->hcon. A disconnect or
device close can tear down the same L2CAP connection in that window.
The buggy scenario involves two paths, with each column showing the order
within that path:
6LoWPAN control write: HCI disconnect/device close:
1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches
and hcon->l2cap_data. the L2CAP disconnect callback.
2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears
protection and returns conn. hcon->l2cap_data and drops the
L2CAP connection reference.
3. lowpan_control_write() reads 3. hci_conn_del() removes and drops
conn->hcon. the HCI connection.
Take a reference to the L2CAP connection with
l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that
reference after the debugfs command's last use of conn. This mirrors the
existing L2CAP ACL receive-side handoff and keeps the connection
dereferenceable after leaving hdev protection. Export the existing helper
so the bluetooth_6lowpan module can use the same lifetime primitive.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520
The buggy address belongs to the object at ffff888111b9d000 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of freed 1024-byte region
[ffff888111b9d000, ffff888111b9d400)
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__debugfs_file_get+0xf7/0x400
full_proxy_write+0x9e/0xd0
vfs_write+0x1b0/0x810
ksys_write+0xd2/0x170
dnotify_flush+0x32/0x220
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
l2cap_conn_add+0x45/0x520
l2cap_chan_connect+0xac6/0xd90
l2cap_sock_connect+0x216/0x350
__sys_connect+0x101/0x130
__x64_sys_connect+0x40/0x50
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
hci_conn_hash_flush+0xc0/0x140
hci_dev_close_sync+0x41a/0xb00
hci_dev_close+0x12f/0x160
hci_sock_ioctl+0x157/0x570
sock_do_ioctl+0xf7/0x210
sock_ioctl+0x32f/0x490
__x64_sys_ioctl+0xc7/0x110
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
kasan_record_aux_stack+0xa7/0xc0
insert_work+0x32/0x100
__queue_work+0x262/0xa60
queue_work_on+0xad/0xb0
l2cap_connect_cfm+0x4ef/0x670
hci_le_remote_feat_complete_evt+0x247/0x430
hci_event_packet+0x360/0x6f0
hci_rx_work+0x2ae/0x7a0
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix stale skb->prev after async crypto steals a GSO segment
skb_gso_segment() leaves the segment list head with ->prev pointing at
the last segment, an invariant validate_xmit_skb_list() relies on when
it sets its tail pointer (tail = skb->prev).
When validate_xmit_xfrm() walks a GSO list and some segments are stolen
by async crypto (->xmit() returns -EINPROGRESS), those segments are
unlinked from the list but the head ->prev is never updated. If the
last segment is the one stolen, the returned head still has ->prev
pointing at it, even though it is now owned by the crypto engine and may
be freed. validate_xmit_skb_list() later does tail->next = skb, writing
through that stale pointer -- a use-after-free.
Repoint skb->prev at the last retained segment before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: defer link RX stats percpu free to RCU
sta_remove_link() frees a removed MLO link's RX stats percpu buffer right
away, but defers only the link container to RCU:
sta_info_free_link(&alloc->info);
kfree_rcu(alloc, rcu_head);
The RX fast path reads link_sta under rcu_read_lock and writes the percpu
stats. A reader that resolved link_sta before the removal keeps the
pointer. The container stays alive from the kfree_rcu, so the read still
works. But the percpu block it points to is already freed. This needs
uses_rss. That is when pcpu_rx_stats exists.
The full STA teardown frees the deflink stats only after
synchronize_net(). The link removal path had no such barrier. The race is
hard to win in practice, but the free should still wait for RCU.
Free the link together with its data from a single RCU callback, so the
percpu block is reclaimed only after readers drain. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF in sock clone early bailouts
Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage
before bailouts that access it"), sk_clone() performs an initial
shallow copy of the socket field ->sk_bpf_storage via sock_copy()
for the cloned socket newsk.
If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior
to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points
to the parent socket's BPF local storage. When newsk is subsequently
freed via sk_free(), the deallocation path (__sk_destruct() ->
bpf_sk_storage_free()) destroys the parent socket's BPF local storage,
leading to a use-after-free (UAF) on the parent socket.
Fix this by resetting newsk->sk_bpf_storage to NULL immediately after
sock_copy() in sk_clone(), and remove the now redundant initialization
from bpf_sk_storage_clone(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: pin conn during async oplock break notification
smb2_oplock_break_noti() and smb2_lease_break_noti() store a ksmbd_conn
pointer in an async ksmbd_work and then queue that work on ksmbd-io. The
work only increments conn->r_count, which prevents teardown from passing
the pending-request wait after the increment, but it does not pin the
struct ksmbd_conn object.
If connection teardown races with an oplock break notification, the last
conn reference can be dropped before the queued worker finishes. The
worker then uses the freed conn in ksmbd_conn_write() and
ksmbd_conn_r_count_dec().
Take a real conn reference when publishing the conn pointer to the async
work item, and drop it after the notification work has decremented
r_count. Apply the same lifetime rule to lease break notification, which
uses the same work->conn pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: tcp: unregister sysctl before tearing down listen socket
rds_tcp_exit_net() frees the per-netns RDS TCP listen socket via
rds_tcp_kill_sock() before unregistering the per-netns sysctl table. Since
rds_tcp_skbuf_handler() derives the netns from
rtn->rds_tcp_listen_sock->sk, a concurrent sysctl write can race with
netns teardown and dereference the freed socket/sk.
KASAN reports the race as:
BUG: KASAN: slab-use-after-free in rds_tcp_skbuf_handler+0x2aa/0x2e0
rds_tcp_skbuf_handler net/rds/tcp.c:721
proc_sys_call_handler fs/proc/proc_sysctl.c
vfs_write fs/read_write.c
__x64_sys_pwrite64 fs/read_write.c
Fix this by unregistering the RDS TCP sysctl table before calling
rds_tcp_kill_sock(). unregister_net_sysctl_table() prevents new sysctl
handlers from starting and waits for in-flight handlers to finish, so
the listen socket can then be released safely. The fix was tested
against the linked reproducer. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs35l41: Fix firmware load work teardown
cs35l41_hda creates ALSA controls whose private data points at the
cs35l41_hda object. The firmware load control can also queue
fw_load_work.
Those controls are not removed on component unbind, and device remove
only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
skipped when halo_initialized is false. With firmware_autostart
disabled, a firmware load can be requested before the DSP has been
initialized. If the component or device is removed before the queued
work runs, the worker can run after teardown and dereference driver
state that is no longer valid.
Track the created controls and remove them on unbind so no new control
callback can reach the driver data or queue more work. Then cancel
fw_load_work to drain any request that was already queued. Also cancel
the work unconditionally during device remove before runtime PM teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
netpoll: fix a use-after-free on shutdown path
There is a use-after-free error on netpoll, which is clearly detected by
KASAN.
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80
Read of size 1 at addr ... by task kworker/9:1
Workqueue: events queue_process
Call Trace:
skb_dequeue+0x1e/0xb0
queue_process+0x2c/0x600
process_scheduled_works+0x4b6/0x850
worker_thread+0x414/0x5a0
Allocated by task 242:
__netpoll_setup+0x201/0x4a0
netpoll_setup+0x249/0x550
enabled_store+0x32f/0x380
Freed by task 0:
kfree+0x1b7/0x540
rcu_core+0x3f8/0x7a0
The problem happens when there is a pending TX worker running in
parallel with the cleanup path.
This is what happens on netpoll shutdown path:
1) __netpoll_cleanup() is called
2) set dev->npinfo to NULL
3) call_rcu() with rcu_cleanup_netpoll_info()
3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with
cancel_delayed_work(), but doesn't wait for the worker to finish
4) and kfree(npinfo);
Because 3.1) doesn't really cancel the work, as the comment says "we
can't call cancel_delayed_work_sync here, as we are in softirq", the TX
worker can run after 4).
Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through
the work item via container_of().
Use disable_delayed_work_sync() to ensure the worker is completely
stopped and prevent any future re-arming attempts. Once npinfo is set
to NULL, senders will bail out and not queue new work. The disable flag
ensures any in-flight re-arming attempts also fail silently.
In the future, we can do the cleanup inline here without needing the
npinfo->rcu rcu_head, but that is net-next material. |
