Export limit exceeded: 417647 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28353 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98838 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vt: skip screen update for DEC alignment test on backgroup consoles [BUG] Recently, we encountered a KASAN warning as follows: BUG: KASAN: slab-out-of-bounds in fb_pad_aligned_buffer+0x11f/0x140 Read of size 1 at addr ff1100015fd9f6a4 by task tty_fbcon_oob/1239 CPU: 7 UID: 0 PID: 1239 Comm: tty_fbcon_oob Not tainted 7.3.0-rc1 #100 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 Call Trace: <TASK> ... kasan_report+0xf0/0x120 fb_pad_aligned_buffer+0x11f/0x140 ccw_putcs+0x86c/0xa80 fbcon_putcs+0x338/0x410 do_update_region+0x21d/0x450 do_con_write+0x1e0e/0x4880 con_write+0x13/0x80 n_tty_write+0x374/0x1010 file_tty_write.isra.0+0x404/0x7a0 ... reproduce: 1) open /dev/tty0, set a KDFONTOP ioctl with op.op = KD_FONT_OP_SET, op.width = 8 and op.height = 16 (visible VC1) 2) open /dev/tty1, set a KDFONTOP ioctl with op.op = KD_FONT_OP_SET, op.width = 28 and op.height = 24 (invisible VC2) 3) echo 3 > /sys/devices/virtual/graphics/fbcon/rotate_all 4) write EShash8(esc hash8) to tty1 [CAUSE] All VCs render to the framebuffer. setfont only modifies the target VC's font without resizing the framebuffer backing buffer (par->rotated.buf); the buffer is only resized for the visible VC (fbcon_do_set_font -> ... -> vc_do_resize -> update_screen). This relies on the con_should_update() check performed before every update_region(). However, the ESC # 8 path (do_con_trol -> do_update_region) omits the con_should_update() check. After changing the font size of an invisible VC, do_update_region() fills using the new font size against a buffer that was never resized, causing an out-of-bounds access. [FIX] Only push the update when the console is visible and not blanked, add the con_should_update() check in the do_con_trol() like every other call site of do_update_region() (update_region(), invert_screen(), ...). | ||||
| CVE-2026-98819 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: validate DDC record lengths Parse DDC record lengths in unsigned storage so 0xFF does not wrap. Reject records smaller than the mandatory three-byte header, records exceeding U8_MAX, and records exceeding remaining firmware bytes before issuing Intel_Write_DDC. This issue was reported by Claude Mythos. | ||||
| CVE-2026-98794 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: filter some flags received in the backup server While the IPVS SYNC protocol is not secure by design we can still protect the backup server from messages that can wreak havoc. This commit addresses problems from received connection flags or their combinations. We now drop messages as follows: 1. the NO_CPORT+TEMPLATE combination allows lookups for normal connections to hit template which can break in many ways. While the master does not sync connections with NO_CPORT flag, i.e. before they are established, we still accept NO_CPORT without TEMPLATE. 2. ONE_PACKET: it is not sent by master, so we do not expect it in backup. Before now it was ignored by IP_VS_CONN_F_BACKUP_MASK for protocol v1 while protocol v0 created connections that are not hashed and dropped immediately. Better to apply the IP_VS_CONN_F_BACKUP_MASK also to the flags from v0 messages for consistency with v1. | ||||
| CVE-2026-98745 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: signal: Forbid non-streaming SVE payload on SME-only systems When system_supports_sme() is true but system_supports_sve() is false, restoring a specifically crafted SVE signal context can result in the task erroneously having non-streaming SVE state. Subsequent attempts to manipulate the task's FPSIMD/SVE/SME state can result in a variety of problems, including fatal EL1 UNDEFs. In such configurations, the kernel always creates an SVE signal context when delivering a signal, and this can only be in one of two states: (1) SVE_SIG_FLAG_SM is set, and an SVE payload is present containing streaming mode SVE state. The recorded VL is the task's live streaming VL. (2) SVE_SIG_FLAG_SM is clear, and an SVE payload is not present. The FPSIMD context contains the non-streaming mode FPSIMD state. The recorded VL is 0. Currently restore_sve_fpsimd_context() correctly rejects cases where SVE_SIG_FLAG_SM is set and an SVE payload is not present, but fails to reject cases where SVE_SIG_FLAG_SM is clear and an SVE payload is present. Consequently, restore_sve_fpsimd_context() can place the task in a state where it has non-streaming SVE state even when this is not supported by HW. For example, this can cause a later EL1 UNDEF when the kernel attempts to restore the task's ZCR_EL1 value: | # ./sme-sigcontext-to-sve | Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP | Modules linked in: | CPU: 0 UID: 0 PID: 131 Comm: sme-sigcontext- Not tainted 7.3.0-rc1 #1 PREEMPT | Hardware name: linux,dummy-virt (DT) | pstate: 61402009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : fpsimd_restore_current_state+0x258/0x458 | lr : exit_to_user_mode_loop+0xb8/0x188 | sp : ffff80008056be40 | x29: ffff80008056be40 x28: fff00000c1670000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: ffff80008056bec0 x22: 0000000000000008 x21: 0000000000000040 | x20: 0000000000000081 x19: 0000000008800010 x18: 0000000000000000 | x17: 0000fffffd412570 x16: 0000000000001000 x15: 0000fffffd4123b0 | x14: 0000fffffd412780 x13: 0000fffffd412be8 x12: 0000000047435300 | x11: 0000fffffd412570 x10: 0000000000000000 x9 : 0000000045585401 | x8 : fff00000c18a6c44 x7 : 0000000000000000 x6 : 0000000000000002 | x5 : 0000000000000002 x4 : ffff800080568000 x3 : 0000000000000001 | x2 : 0000000008800010 x1 : fff00000c1670000 x0 : 0000000008800000 | Call trace: | fpsimd_restore_current_state+0x258/0x458 (P) | exit_to_user_mode_loop+0xb8/0x188 | el0_svc+0x1cc/0x1d0 | el0t_64_sync_handler+0xa0/0xe4 | el0t_64_sync+0x198/0x19c | Code: d5384101 f9400020 53175c03 36b80de0 (d5381202) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: Oops - Undefined instruction: Fatal exception in interrupt | Kernel Offset: 0x291fb1000000 from 0xffff800080000000 | PHYS_OFFSET: 0x40000000 | CPU features: 0x0,00000000,0052802f,ffb88f43,3afcf73f | Memory Limit: none Rework restore_sve_fpsimd_context() to reject cases where SVE_SIG_FLAG_SM is clear and an SVE payload is not present. As parse_user_sigframe() rejects SVE signal frames when neither SVE nor SME are supported, it isn't necessary for restore_sve_fpsimd_context() to handle the case where neither are supported. | ||||
| CVE-2026-98732 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 3.4 Low |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: fix buffer over-read in btintel_hw_error() The "Exception info %s" print uses skb->data + 1, but the 12-byte payload is not guaranteed to be NUL-terminated and can be read past its end. Bound the print with "%.*s" and skb->len - 1. | ||||
| CVE-2026-98726 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix underflow in ANA log bounds checks The number of ANA groups advertised through Identify Controller sizes the ANA log buffer. The ANA log header and group descriptors independently supply the number of groups and namespace IDs to parse. Both bounds checks subtract an untrusted object size from ana_log_size before comparing the current offset. If the object is larger than the buffer, the size_t subtraction underflows and lets the parser read beyond ana_log_buf. Check the current offset before the first subtraction and compare each object size with the remaining buffer instead. This rejects inconsistent ANA data before dereferencing a truncated group descriptor or walking an oversized namespace ID array. | ||||
| CVE-2026-98687 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Reject oversized XDomain properties responses tb_xdp_properties_request() allocates room for 45 data dwords in its 252-byte response buffer. The XDomain length field is six bits wide, however, and a malicious peer can set it to 63. After the fixed response fields are subtracted, the driver treats this as 48 data dwords. Commit 322e93448d90 ("thunderbolt: Clamp XDomain response data copy to allocation size") only bounds the copy against data_len. If data_len is at least 48, memcpy() reads 192 bytes from the 180-byte res->data array, causing a 12-byte heap out-of-bounds read. Commit 4db2bd2ed478 ("thunderbolt: Limit XDomain response copy to actual frame size") limits the earlier copy but does not constrain this header-derived length. Reject response data lengths that exceed the allocated source buffer before copying them into the assembled property block. | ||||
| CVE-2026-98660 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: pressure: bmp280: fix out-of-bounds access in sampling frequency lookup The sampling frequency tables store each frequency as an integer part and a fractional part in micro units. num_sampling_freq_avail is initialized to the number of flattened integer elements because read_avail() returns the table as a flat array. bmp280_write_sampling_frequency(), however, indexes the same table as a two-dimensional array and uses num_sampling_freq_avail as the number of rows. Convert the flattened element count back to the number of rows before iterating over the table. | ||||
| CVE-2026-98454 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix create context out-of-bounds reads smb2_parse_contexts() validates the complete create-context area but does not limit each record to its Next field before dispatching it. A malformed chain can therefore expose bytes beyond the current context to a handler. The QFid handler also used a full response-structure cast although it only reads DiskFileId. The SMB2/SMB3 lease parsers made the same layout assumption: they read LeaseState and LeaseFlags at canonical offsets rather than at DataOffset. A valid non-canonical DataOffset could therefore yield unrelated in-bounds data, while a short DataLength was still accepted. Limit each context to its Next value, reject offsets before the context header, and reject malformed chains. Bound the name range by the current context and do not dispatch a known handler when DataLength is zero. Read the QFid DiskFileId only when the context data covers that field. Parse the lease context from DataOffset and require DataLength to match the v1 or v2 lease_context size used by ksmbd. A size mismatch skips lease parsing without failing the open. | ||||
| CVE-2026-98377 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vlan: require the MAC header to be present in __vlan_insert_inner_tag() __vlan_insert_inner_tag() only guarantees head room via skb_cow_head(), never that mac_len bytes of MAC header are present. Its ETH_HLEN wrappers - __vlan_insert_tag() under skb_vlan_push(), and vlan_insert_tag() under validate_xmit_vlan() on the generic transmit path - therefore rewrite the first 16 bytes at skb->data: a 12-byte memmove plus two 2-byte stores at +12 and +14. No caller supplies the bound, while the pop helpers use skb_ensure_writable()/pskb_may_pull(). An IFF_TUN device has hard_header_len == 0, so packet_snd() accepts a one-byte AF_PACKET/SOCK_RAW frame. The first vlan push only sets a hwaccel tag; the next - clsact "action vlan push" or bpf_skb_vlan_push() - enters the helper with skb->len still 1. The head comes from skbuff_small_head without __GFP_ZERO, so each push drags bytes from beyond skb->tail into the frame. After three the one-byte send leaves as 13 bytes carrying 11 bytes of uninitialised slab: 0000: 5a b3 62 12 80 88 ff ff 00 b3 62 12 81 `------------------------------' only 0x5a was sent; the rest is slab, here the top 56 bits of a linear-map address Require the MAC header the helper rewrites to be present, so such a frame is dropped rather than transmitted. | ||||
| CVE-2026-98375 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/netfront: drop RX packets with a short Ethernet header handle_incoming_queue() pulls pull_to bytes into the head before calling eth_type_trans(). pull_to is the length of the first RX slot, capped at RX_COPY_THRESHOLD, and that length comes from the backend. Nothing checks it against ETH_HLEN. If the first slot is shorter than ETH_HLEN and more slots follow, the head ends up shorter than an Ethernet header while skb->len is longer, and eth_type_trans() BUG()s in __skb_pull(). If the whole packet is shorter than ETH_HLEN, eth_type_trans() reads the header past the end of the data instead. Pull at least ETH_HLEN, and drop the packet if that fails, which also drops packets too short to hold an Ethernet header. This also checks the return value of the pull, which was ignored. | ||||
| CVE-2026-98193 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject TKIP frames without a full MIC libipw_michael_mic_verify() assumes that an skb contains an eight-byte Michael MIC. A short TKIP frame makes the unsigned payload length wrap, causing michael_mic() to read past the skb. Check that the MIC is present before verifying it, and use the existing MICHAEL_MIC_LEN constant for all MIC lengths in the verifier. | ||||
| CVE-2026-98171 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs Fix several related bounds checking and pointer lifecycle issues in receive_encrypted_standard()'s handling of compound encrypted frames: - Clear next_buffer after assigning it to server->bigbuf. A stale next_buffer pointer can lead to a use-after-free on subsequent error paths. - Update pdu_length to the decrypted plaintext size (buf_size). Using the pre-decryption length allows NextCommand to point into stale ciphertext residue. - Reject next_cmd values smaller than MID_HEADER_SIZE(server). - Fix an integer overflow in the upper bound check by verifying pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the trailing slice is large enough for a header. | ||||
| CVE-2026-98170 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs() In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is insufficient. It allows iteration to continue even if the remaining src_size is too small to contain a complete smb2_ea_info structure. Consequently, reads of ea_name_length and ea_value_length can occur out-of-bounds. Fix this by ensuring src_size >= sizeof(*src) before attempting to read any structure fields. Additionally, reject any next_entry_offset that is smaller than sizeof(*src) or that would advance the pointer beyond the available buffer. Note that for calls where the server returns a malformed EA list, the error returned to userspace changes from -ENODATA (getxattr) or -ERANGE (listxattr) to -EIO. This correctly signals a server protocol error rather than misleadingly indicating "attribute not present" or "output buffer too small". | ||||
| CVE-2026-98169 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential OOB read in smb3_enum_snapshots() If snapshot_array_size is smaller than GMT_TOKEN_SIZE, smb3_enum_snapshots() sets ret_data_len to sizeof(struct smb_snapshot_array) without verifying the actual length of the server's reply. Because SMB2_ioctl() places no lower bound on the server-supplied OutputCount and allocates retbuf to exactly that length, a short reply results in ret_data_len exceeding the size of retbuf. The subsequent copy_to_user() then reads past the end of retbuf, leaking adjacent slab memory to userspace. The subsequent clamp check is ineffective as it only reduces ret_data_len. Fix this by rejecting replies shorter than sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set to the 12-byte struct size rather than the 16-byte MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes is exactly what copy_to_user() attempts to read. | ||||
| CVE-2026-97587 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: store available counter mask as bitmap The available-counter mask was a single unsigned long, but iteration uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object. Filling with an unsigned-long bit at index 32 and above is also wrong. Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word into CFG_MATCH when checking events, when allocating an index, and when stopping all counters. Set the counter base to i times BITS_PER_LONG. Share the CFG_MATCH ecall through a small helper so the 32-bit argument split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits above XLEN set, so the first word alone is not enough. [pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] | ||||
| CVE-2026-97529 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[] The FC BSG transport allocates job->request via memdup_user() using the exact user-supplied request_len. For FC_BSG_HST_VENDOR, fc_bsg_host_dispatch() only guarantees request_len covers msgcode and vendor_id; it does not account for the vendor_cmd[] flexible array. qla2xxx then reads the command selector vendor_cmd[0] and, in several sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor command area without verifying request_len. A caller holding CAP_SYS_RAWIO can submit a short request whose vendor_id matches the host, triggering out-of-bounds heap reads (KASAN-detectable, and able to mis-select a command or panic). Add a central guard in qla2x00_process_vendor_specific() so the selector is always in bounds, restrict the early vendor_cmd[0] read in qla24xx_bsg_request() to sufficiently long vendor messages, and add request_len checks to the sub-handlers that read further: qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(), qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(), qla2x00_update_optrom(), qlafx00_mgmt_cmd() and qla28xx_validate_flash_image(). | ||||
| CVE-2026-97505 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store() Currently, the __resource_resize_store() allows writing to the resourceN_resize sysfs attribute to change a BAR's size without checking for capabilities, currently relying only on the file access check. Resizing a BAR modifies PCI device configuration and can disrupt active drivers. After the upcoming conversion to static attributes, it will also trigger resource file updates via sysfs_update_groups(). Add a CAP_SYS_ADMIN check to prevent unprivileged users from performing BAR resize operations. | ||||
| CVE-2026-97500 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: phy: check length before parsing PHY status IE Hardware might report PHY status IE with unexpected length, and parser might access out of range. Check the length ahead. | ||||
| CVE-2026-97494 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate and share PSP fw_pri_buf copies via psp_copy_fw Change psp_copy_fw from void to int: return -ENODEV when drm_dev_enter fails, and -EINVAL when the image size is zero or larger than the 1 MiB PSP private buffer. Replace open-coded memset/memcpy into fw_pri_buf with psp_copy_fw. | ||||