Search

Search Results (427991 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-127220 2026-11-17 5.3 Medium
Kadence Security plugin for WordPress (better-wp-security) before 10.0.6.1 contains a brute-force protection bypass vulnerability that allows unauthenticated attackers to evade per-host login lockouts by exploiting IPv6 address handling in ITSEC_Lib::get_ip(), which keys failed-login counters on the full 128-bit IPv6 address rather than a /64 prefix. Attackers who control a routed IPv6 /64 can send each login attempt from a new address within that prefix, resetting the per-host counter each time to perform password spraying and username enumeration, and can similarly evade the auto_ban_admin immediate ban via address rotation.
CVE-2026-124017 2026-11-17 6.7 Medium
Phison E12 and E18 PCIe SSD controllers contain a Secure Boot bypass vulnerability that allows a privileged local attacker to inject persistent boot-patch tuples into the unsigned, CRC-protected flash ID page read by the BootROM. By overwriting a fuse-derived RAM variable via a crafted patch entry using Phison Vendor Specific Commands, an attacker can force CRC-only firmware verification instead of signature checking, enabling an unsigned firmware image to load and creating a persistent controller-level implant that survives firmware reinstallation and operates below the host operating system.
CVE-2026-121716 1 Junegunn 1 Fzf 2026-11-17 7 High
fzf is a command-line fuzzy finder. Prior to 0.74.5, bin/fzf-tmux validates separately supplied layout sizes but does not validate attached -l and -u layout values before Bash arithmetic expansion, allowing command substitution in a crafted operand to execute as the invoking user during option parsing. The same validation failure lets space-bearing popup geometry options -x, -y, -w, -h, and -p reach an unquoted tmux popup option string and inject additional tmux flags. Exploitation requires less-trusted project configuration, a wrapper, or a plugin to supply the poisoned value and requires the victim to invoke fzf-tmux; normal values are usually trusted, and the script has been superseded by built-in tmux options. This issue is fixed in version 0.74.5.
CVE-2026-119293 1 Signalwire 1 Freeswitch 2026-11-17 N/A
FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. In 1.11.2 and earlier, rtp_common_read() in src/switch_rtp.c uses one session-wide autoadj_tally to learn RTP sources that differ from the address negotiated in SDP. An unauthenticated remote attacker who sends plaintext RTP during call setup can make packets from one or more non-advertised sources reach the threshold before the legitimate endpoint, causing FreeSWITCH to adopt the source of the threshold-crossing packet as the media peer. The attacker can then receive call audio, inject media, and deny media to the legitimate endpoint without being on the media path. FreeSWITCH 1.11.2 adds two opt-in controls, but both default to zero and the release remains affected unless both are configured before RTP session creation. This vulnerability is fixed in 1.11.2.
CVE-2026-117552 1 Typecho 1 Typecho 2026-11-17 6.5 Medium
Typecho before 1.3.1-rc contains a server-side request forgery vulnerability in the XML-RPC pingback.ping method where checkSafeHost() validates a hostname's resolved IP once but the subsequent outbound request performs an independent DNS resolution, creating a TOCTOU window exploitable via DNS rebinding. An unauthenticated attacker can configure a domain to return a benign IP at validation time and an internal address (loopback, RFC1918, or cloud metadata IP) at request time, causing the server to issue blind SSRF requests to arbitrary internal hosts and ports.
CVE-2026-113781 1 Espressif 1 Esp-idf 2026-11-17 7.1 High
ESP-IDF is the Espressif Internet of Things (IoT) Development Framework. Prior to 5.2.8, 5.3.6, 5.5.6, and 6.0.3, the Bluedroid BLE Mesh GATT server read handler bt_mesh_bta_gatts_cb in esp_ble_mesh stores a signed attribute-read callback length in an unsigned 16-bit variable. A negative ATT error code is therefore interpreted as a very large successful length and used for a memory copy from a small stack buffer into the GATT response structure. A remote attacker within Bluetooth LE range who can connect to an exposed PB-GATT provisioning or Mesh Proxy service can trigger a failed attribute read with a crafted request. On devices where the affected attributes are accessible without pairing, exploitation requires neither pairing nor user interaction; access requirements depend on device configuration. The resulting out-of-bounds read and stack-based buffer overflow corrupts the Bluetooth host task stack, causing a crash and device restart and potentially further memory corruption. The issue affects devices built with CONFIG_BT_BLUEDROID_ENABLED=y and BLE Mesh GATT enabled; the NimBLE host path is not affected. This issue is fixed in versions 5.2.8, 5.3.6, 5.5.6, and 6.0.3.
CVE-2026-102892 1 Opencti-platform 1 Opencti 2026-11-17 5.3 Medium
OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to 7.260416.0, public TAXII 2.1 collections configured with taxii_public set to true are served under the high-privilege SYSTEM_USER context rather than a restricted public-sharing user context. Unauthenticated requests can therefore bypass object markings, organization segregation, and authorized_members restrictions and retrieve restricted threat-intelligence objects that match the collection filters; a broad or absent filter can expose most of the database. Version 7.260416.0 remediates this issue for new configurations, but public-sharing configurations created before that version are not covered and are tracked separately in GHSA-25r9-q6rp-j7jw.
CVE-2026-118630 2026-11-17 N/A
Winmate HotTab Exposed Dangerous Function Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Winmate devices. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the HotTab driver. The issue results from an exposed dangerous function. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the kernel. Was ZDI-CAN-29948.
CVE-2026-126980 2026-11-17 N/A
Philips Hue Bridge HomeKit Observable Discrepancy Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of Philips Hue Bridge. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HomeKit Authentication service, which listens on TCP port 8080 by default. When processing crafted pairing requests, the service discloses internal information via an observable discrepancy between possible responses. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the device. Was ZDI-CAN-28470.
CVE-2026-126979 2026-11-17 N/A
Philips Hue Bridge HomeKit Accessory Protocol chacha20_decrypt Integer Underflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Philips Hue Bridge. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HomeKit Accessory Protocol service, which listens on TCP port 8080 by default. When parsing pairing requests, the process does not properly validate user-supplied data, which can result in an integer underflow before writing to memory. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28332.
CVE-2026-126978 2026-11-17 N/A
Philips Hue Bridge hap_pair_setup_handler Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Philips Hue Bridge. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HomeKit Accessory Protocol service, which listens on TCP port 8080 by default. When parsing pairing requests, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length, heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28434.
CVE-2026-126977 2026-11-17 N/A
Philips Hue Bridge HomeKit Pair-Setup Default Password Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of Philips Hue Bridge. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HomeKit Authentication service, which listens on TCP port 8080 by default. Crafted data in a pairing request can cause the device to allow authentication using a blank password. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-28323.
CVE-2026-126976 2026-11-17 N/A
llama.cpp MTMD Multimodal GGUF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of llama.cpp. User interaction is required to exploit this vulnerability in that the target must open a malicious file. The specific flaw exists within the parsing of audio multimodal projector GGUF files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute arbitrary code in the context of the current process. Was ZDI-CAN-30980.
CVE-2026-126975 2026-11-17 N/A
llama.cpp GGUF File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of llama.cpp. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of GGUF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute arbitrary code in the context of the current process. Was ZDI-CAN-34558.
CVE-2026-126974 2026-11-17 N/A
llama.cpp GGUF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of llama.cpp. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of GGUF files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before writing to memory. An attacker can leverage this vulnerability to execute arbitrary code in the context of the current process. Was ZDI-CAN-34553.
CVE-2026-126973 2026-11-17 N/A
KDE Gwenview PNG File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of KDE Gwenview. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PNG files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29373.
CVE-2026-126972 2026-11-17 N/A
KiCad Plugin Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of KiCad. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of plugin packages. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute arbitrary code in the context of the current user. Was ZDI-CAN-33085.
CVE-2026-130932 1 Google 1 Chrome 2026-11-17 8.8 High
Improper resource exposure in Core in Google Chrome on on Android prior to 158.0.8127.36 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High)
CVE-2026-130926 1 Google 1 Chrome 2026-11-17 8.8 High
Confused deputy in Sync in Google Chrome prior to 158.0.8127.36 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via crafted network traffic. (Chromium security severity: High)
CVE-2026-130947 1 Google 1 Chrome 2026-11-17 6.5 Medium
Integer overflow in Autofill in Google Chrome on on Android prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to obtain cross-origin data via a crafted HTML page. (Chromium security severity: Medium)