| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject short SESSION_SETUP responses
smb2_check_message() accepts frames shorter than struct smb2_pdu when
the SMB2 status is non-zero, before the minimum-PDU check added by
b4694f269e66d. A 64-byte STATUS_MORE_PROCESSING_REQUIRED SESSION_SETUP
response is therefore accepted even though it cannot contain the
SecurityBufferOffset and SecurityBufferLength fields.
The parser then reads those fields from stale bytes left in the reused
receive buffer by an earlier frame. With a long stale
SecurityBufferLength, decode_ntlmssp_challenge() copies up to about
64 KB from beyond the receive object and sends the data back to the
server in the NTLMv2 AUTHENTICATE target info.
Reject short MPR SESSION_SETUP responses before the short-error path,
and validate SecurityBufferOffset + SecurityBufferLength against the
received response length before decoding the challenge.
The ordering bypass is not new: the short-error early return predates
b4694f269e66d, and the unvalidated SecurityBufferLength read predates
the 2016 raw NTLMSSP split in 166cea4dc3a4, so all supported stable
trees are affected. Reproduced on 6.6.87.2; the path is unchanged on
mainline. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer connection scavenging while session locks are busy
The expiration worker holds conn_list_lock for reading while checking
for authenticated sessions. Without this change, the check can wait for
conn->session_lock or sessions_table_lock.
In destroy_previous_session(), the status updates after
ksmbd_conn_wait_idle_sess() run with both session locks held for
writing. Both the KSMBD_SESS_GOOD error path and the
KSMBD_SESS_NEED_SETUP success path call ksmbd_all_conn_set_status(),
which takes conn_list_lock for reading.
A writer queued on conn_list_lock can block these new read acquisitions.
The worker then waits for a session lock held by
destroy_previous_session(), which waits behind the writer. The writer
cannot proceed until the worker releases conn_list_lock.
Try both session locks instead of waiting in the scavenging check. Keep
the connection when either lock is busy and let the periodic worker
retry later. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: hold a connection reference for each session channel
ksmbd_session_unregister() removes a session from the global and per-
connection tables before dropping the table reference. A concurrent
reference holder can keep the session and its channel list alive after
those removals.
Connection cleanup can no longer find the unpublished session to remove its
channels. Since a channel only stores a raw conn pointer, the connection
can be freed while another session reference holder is still accessing it,
for example during SMB3.1.1 binding or a procfs read.
Take a connection reference when registering a channel and release it on
insertion failure, channel removal, or final session destruction. Keep the
channels and signing keys until the session is destroyed so a response can
still be signed after the session has been unregistered. |
| The Link Library plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'link_description' parameter in all versions up to, and including, 7.10.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This exploit requires the site administrator to have enabled the non-default 'Convert [] to <> in Link Description and Notes' (use_html_tags) setting; when this option is off, the bracket-to-angle-bracket conversion never runs and the payload is never reconstructed into executable HTML. |
| The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to Authentication Bypass via Account Takeover in all versions up to, and including, 5.7.6. This is due to the `OsModel::build_conditions_query()` function in `lib/models/model.php` comparing WHERE-clause values against the literal strings `'IS NULL'` and `'IS NOT NULL'` and concatenating a match directly into SQL without binding it as a parameter, a flaw that neither `sanitize_text_field()` nor the 5.7.5 `is_scalar()` hardening guard closes, since both pass the scalar sentinel through unchanged. This makes it possible for unauthenticated attackers to send `params[password_reset_token]=IS NOT NULL` to the public `customer_cabinet__change_password` AJAX route to match every non-null `account_nonse` value, resolving to the lowest-id customer and overwriting that customer's password to an attacker-chosen value — granting full access to their bookings, orders, and PII, and, when the `wp_users_as_customers` option is enabled, takeover of the linked WordPress subscriber or customer-role account. The attacker can first identify the target customer's email by sending `params[order_intent_key]=IS NOT NULL` to the public `steps__start_from_order_intent` route, which returns the name and email from the first matching order intent, and can then self-arm the required 15-minute password-reset freshness window by triggering a reset for that customer directly. |
| A flaw was found in the SAML HTTP-Redirect binding implementation of Keycloak. The issue occurs because the server processes percent-encoded parameter names (like %53AMLResponse) while the signature verification logic only checks literal parameter names. An attacker can use this discrepancy to provide a crafted, unsigned SAML message that the server processes instead of a legitimately signed one, leading to full account takeover of federated users. |
| A vulnerability was found in ESEngine DeepSeek-Reasonix up to 1.33.0. Impacted is the function loadGitStatus of the file build.rs of the component Build Script Execution. Performing a manipulation results in permission issues. The attack may be initiated remotely. Upgrading to version 1.34.0 is recommended to address this issue. The patch is named a54659c2c5b0f4e57aae2b44d41f421c6a71e8cf. You should upgrade the affected component. |
| In JetBrains TeamCity before 2026.1 remote code execution was possible via Perforce connection settings |
| Missing Authorization vulnerability in Wpmet Metform metform allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Metform: from n/a through 4.3.3. |
| Cross-Site Request Forgery (CSRF) vulnerability in Passionate Programmer Peter WP Data Access wp-data-access allows Cross Site Request Forgery.This issue affects WP Data Access: from n/a through 5.5.90. |
| Missing Authorization vulnerability in HivePress HivePress hivepress allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects HivePress: from n/a through 1.8.1. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Crocoblock JetEngine jet-engine allows Stored XSS.This issue affects JetEngine: from n/a through 3.9.0.2. |
| Treeio through 2.0 contains an insecure deserialization vulnerability in UpdateRecord.get_format_strings and ModuleSetting.loads that allows staff users to execute code via unverified pickle data. Attackers can store a crafted base64 pickle payload in an UpdateRecord format_strings field through the Django admin, executing Python code as the web server user when news feeds render. |
| libexpat through 2.10.0 contains an out-of-bounds read vulnerability in unknown_toUtf8() and unknown_toUtf16() in xmltok.c when handling application-registered unknown encodings. Attackers can supply a document ending in a truncated multibyte sequence so the convert callback reads past the parse buffer, leaking adjacent memory or crashing applications. |
| Frappe ERPNext before 15.121.4 and 16.x before 16.36.0 contains a missing authorization vulnerability in the whitelisted erpnext.buying.utils.get_linked_material_requests method lacking document or company permission checks. Authenticated users, including portal users or users without roles, can supply item codes to retrieve open Purchase-type Material Requests belonging to other companies. |
| Frappe ERPNext before 15.121.4 and 16.x before 16.36.0 contains a missing authorization vulnerability in the whitelisted get_bom_items and get_bom_diff methods that skip BOM read permission checks. Any authenticated user, including portal or no-role users, can call get_bom_items with a BOM name to retrieve every raw material, quantity, rate and cost. |
| Frappe ERPNext before 15.121.4 and 16.x before 16.36.0 contains a missing authorization vulnerability in erpnext.crm.utils.get_open_activities that exposes ToDo and Event records. Any authenticated user, including portal or no-role users, can supply arbitrary ref_doctype and ref_docname values to enumerate activities and private calendar event details. |
| Frappe ERPNext before 15.121.4 and 16.x before 16.36.0 contains a missing authorization vulnerability in the whitelisted get_linked_payments_for_doc method. Any authenticated user, including portal users, can supply arbitrary company, doctype, and docname values to read Payment Ledger Entry allocation data for other companies' invoices and vouchers. |
| Fraunhofer HHI VVdeC through 3.2.1 contains a heap out-of-bounds read vulnerability that allows attackers to crash the decoder by supplying a collocated picture of different resolution. Attackers can craft a VVC bitstream enabling TMVP with a smaller collocated reference picture, causing getColInfo to read past the colMotion allocation when error concealment is enabled. |
| Fraunhofer HHI VVdeC through 3.2.1 contains a NULL pointer dereference vulnerability in InterPrediction::xPredInterBlk that allows attackers to crash the decoder by switching SPS to enable reference wrap-around. Attackers can supply a crafted VVC bitstream activating a new SPS with sps_ref_wraparound_enabled_flag set, causing reads from missing PIC_RECON_WRAP buffers and denial of service. |
