| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent uninitialized lcn caused by zero len
syzbot reported a uninit-value in ntfs_iomap_begin [1].
Since runs was not touched yet, run_lookup_entry() immediately fails
and returns false, which makes the value of "*len" 0.
Simultaneously, the new value and err value are also 0, causing the
logic in attr_data_get_block_locked() to jump directly to ok, ultimately
resulting in *lcn being triggered before it is set [1].
In ntfs_iomap_begin(), the check for a 0 value in clen is moved forward
to before updating lcn to avoid this [1].
[1]
BUG: KMSAN: uninit-value in ntfs_iomap_begin+0x8c0/0x1460 fs/ntfs3/inode.c:825
ntfs_iomap_begin+0x8c0/0x1460 fs/ntfs3/inode.c:825
iomap_iter+0x9b7/0x1540 fs/iomap/iter.c:110
Local variable lcn created at:
ntfs_iomap_begin+0x15d/0x1460 fs/ntfs3/inode.c:786 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix durable fd leak on ClientGUID mismatch in durable v2 open
ksmbd_lookup_fd_cguid() returns a ksmbd_file with its refcount
incremented via ksmbd_fp_get(). parse_durable_handle_context() in
the DURABLE_REQ_V2 case properly releases this reference on every
path inside the ClientGUID-match branch, either by calling
ksmbd_put_durable_fd() or by transferring ownership to dh_info->fp
for a successful reconnect. However, when an entry exists in the
global file table with the same CreateGuid but a different
ClientGUID, the code simply falls through to the new-open path
without dropping the reference obtained from ksmbd_lookup_fd_cguid().
Per MS-SMB2 section 3.3.5.9.10 ("Handling the
SMB2_CREATE_DURABLE_HANDLE_REQUEST_V2 Create Context"), the server
MUST locate an Open whose Open.CreateGuid matches the request's
CreateGuid AND whose Open.ClientGuid matches the ClientGuid of the
connection that received the request. If no such Open is found, the
server MUST continue with the normal open execution phase. A
CreateGuid hit with a ClientGUID mismatch is therefore the
"Open not found" case: proceeding with a new open is correct, but
the reference obtained purely as a side effect of the lookup must
not be leaked.
Repeated requests that hit this mismatch pin global_ft entries,
prevent __ksmbd_close_fd() from ever running for the corresponding
files, and defeat the durable scavenger, leading to long-lived
resource leaks.
Release the reference in the mismatch path and clear dh_info->fp so
subsequent logic does not mistake a non-matching lookup result for
a reconnect target. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: v: stop OGMv2 on disabled interface
When a batadv_hard_iface is disabled, its mesh_iface pointer is set to
NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via
batadv_v_ogm_queue_on_if() for interfaces that have since lost their
mesh_iface association. This results in a NULL pointer dereference when
batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the
now NULL hard_iface->mesh_iface to retrieve the batadv_priv.
It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that
it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was
called. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: fix NULL deref in rds_ib_send_cqe_handler() on masked atomic completion
rds_ib_xmit_atomic() always programs a masked atomic opcode
(IB_WR_MASKED_ATOMIC_CMP_AND_SWP or IB_WR_MASKED_ATOMIC_FETCH_AND_ADD)
for every RDS atomic cmsg. But the completion-side switch in
rds_ib_send_unmap_op() only handles the non-masked opcodes, so a masked
atomic completion falls through to default and returns rm == NULL while
send->s_op is left set. rds_ib_send_cqe_handler() then dereferences the
NULL rm via rm->m_final_op, oopsing in softirq context. An unprivileged
AF_RDS sendmsg() of an atomic cmsg over an active RDS/IB connection
triggers it; on hardware that natively accepts masked atomics (mlx4,
mlx5) no extra setup is needed.
RDS/IB: rds_ib_send_unmap_op: unexpected opcode 0xd in WR!
Oops: general protection fault [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000190-0x0000000000000197]
RIP: rds_ib_send_cqe_handler+0x25c/0xb10 (net/rds/ib_send.c:282)
Call Trace:
<IRQ>
rds_ib_send_cqe_handler (net/rds/ib_send.c:282)
poll_scq (net/rds/ib_cm.c:274)
rds_ib_tasklet_fn_send (net/rds/ib_cm.c:294)
tasklet_action_common (kernel/softirq.c:943)
handle_softirqs (kernel/softirq.c:573)
run_ksoftirqd (kernel/softirq.c:479)
</IRQ>
Kernel panic - not syncing: Fatal exception in interrupt
Handle the masked atomic opcodes in the same case as the non-masked
ones: they map to the same struct rds_message.atomic union member, so
the existing container_of()/rds_ib_send_unmap_atomic() body is correct
for them. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: clear current gateway during teardown
batadv_gw_node_free() removes the gateway list entries during mesh teardown,
but it does not clear the currently selected gateway. This leaves stale
gateway state behind across cleanup and can break a later mesh recreation.
Clear bat_priv->gw.curr_gw before walking the gateway list so the selected
gateway reference is dropped as part of teardown. |
| Adobe Experience Manager Forms JEE versions LTS SP1, 6.5.24.0 and earlier are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a high-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field. Scope is changed. |
| Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via crafted Flash content, as possibly exploited in the wild in May 2011 by a Microsoft Office document with an embedded .swf file. |
| IBM WebSphere Application Server 9.0, and 8.5 is vulnerable to server-side request forgery (SSRF) with the Ajax Proxy configured. This may allow an attacker to send unauthorized requests from the system, resulting in a security bypass or information disclosure. |
| IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. |
| IBM WebSphere Application Server 8.5 and 9.0 could allow a remote attacker to bypass authentication and gain unauthorized access to JAX-WS applications. |
| IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. |
| IBM WebSphere Application Server 9.0 and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to HTTP request smuggling. A remote attacker could smuggle a specially crafted request to the application server thereby allowing the attacker to bypass security controls, spoof identity, escalate privilege, and expose sensitive information. |
| A vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android, WebClient (Client signaling, API sync loop, config management modules) allows Privilege Abuse.
This vulnerability is associated with program files src/rendezvous_mediator.Rs, src/hbbs_http/sync.Rs and program routines API sync loop, api-server config handling.
This issue affects RustDesk Client: through 1.4.8. |
| Use of Password Hash With Insufficient Computational Effort, Improper Restriction of Excessive Authentication Attempts vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android (Client login, peer authentication modules) allows Password Brute Forcing.
The authentication proof is SHA256(SHA256(password + salt) + challenge), where both the salt and the challenge are generated entirely by the server with no client-side nonce, and the hash uses no slow key-derivation function. A rogue or on-path API/relay server (see CVE-2026-30794 / CVE-2026-30797) can issue a chosen salt and challenge, capture the resulting proof, and recover the password offline. The capture-replay claim (CWE-294) is withdrawn: the challenge is regenerated per connection (challenge = Config::get_auto_password(6)), so a captured proof is not replayable against the legitimate server. The 1.4.7 OTP brute-force limiter and the existing LOGIN_FAILURES counter constrain only ONLINE attempts and do not address offline recovery.
This vulnerability is associated with program files src/client.rs and program routines handle_hash(), handle_login_from_ui() (login proof construction).
This issue affects RustDesk Client: through 1.4.8. |
| Insufficient Verification of Data Authenticity, Improper Handling of Exceptional Conditions vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android (Heartbeat sync loop, strategy processing modules) allows Protocol Manipulation.
This vulnerability is associated with program files src/hbbs_http/sync.Rs and program routines stop-service handler in heartbeat loop.
This issue affects RustDesk Client: through 1.4.8. |
| A vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android, WebClient (Strategy sync, HTTP API client, config options engine modules) allows Application API Message Manipulation via Man-in-the-Middle.
This vulnerability is associated with program files src/hbbs_http/sync.Rs, hbb_common/src/config.Rs and program routines Strategy merge loop in sync.Rs, Config::set_options().
This issue affects RustDesk Client: through 1.4.8. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Reject empty multisync extension to prevent infinite loop
v3d_get_extensions() walks a userspace-provided singly-linked list of
ioctl extensions without any bound on the chain length. A local user
can craft a self-referential extension (ext->next == &ext) with zero
in_sync_count and out_sync_count, which bypasses the existing duplicate-
extension guard:
if (se->in_sync_count || se->out_sync_count)
return -EINVAL;
The guard never fires because v3d_get_multisync_post_deps() returns
immediately when count is zero, leaving both fields at zero on every
iteration. The result is an infinite loop in kernel context, blocking
the calling thread and pegging a CPU core indefinitely.
Fix this by rejecting a multisync extension where both in_sync_count
and out_sync_count are zero in v3d_get_multisync_submit_deps(). An
empty multisync carries no synchronization information and serves no
useful purpose, so returning -EINVAL for such an extension is the
correct defense against this attack vector. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix held lock freed on hfsplus_fill_super()
hfsplus_fill_super() calls hfs_find_init() to initialize a search
structure, which acquires tree->tree_lock. If the subsequent call to
hfsplus_cat_build_key() fails, the function jumps to the out_put_root
error label without releasing the lock. The later cleanup path then
frees the tree data structure with the lock still held, triggering a
held lock freed warning.
Fix this by adding the missing hfs_find_exit(&fd) call before jumping
to the out_put_root error label. This ensures that tree->tree_lock is
properly released on the error path.
The bug was originally detected on v6.13-rc1 using an experimental
static analysis tool we are developing, and we have verified that the
issue persists in the latest mainline kernel. The tool is specifically
designed to detect memory management issues. It is currently under active
development and not yet publicly available.
We confirmed the bug by runtime testing under QEMU with x86_64 defconfig,
lockdep enabled, and CONFIG_HFSPLUS_FS=y. To trigger the error path, we
used GDB to dynamically shrink the max_unistr_len parameter to 1 before
hfsplus_asc2uni() is called. This forces hfsplus_asc2uni() to naturally
return -ENAMETOOLONG, which propagates to hfsplus_cat_build_key() and
exercises the faulty error path. The following warning was observed
during mount:
=========================
WARNING: held lock freed!
7.0.0-rc3-00016-gb4f0dd314b39 #4 Not tainted
-------------------------
mount/174 is freeing memory ffff888103f92000-ffff888103f92fff, with a lock still held there!
ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0
2 locks held by mount/174:
#0: ffff888103f960e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.constprop.0+0x167/0xa40
#1: ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0
stack backtrace:
CPU: 2 UID: 0 PID: 174 Comm: mount Not tainted 7.0.0-rc3-00016-gb4f0dd314b39 #4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
debug_check_no_locks_freed+0x13a/0x180
kfree+0x16b/0x510
? hfsplus_fill_super+0xcb4/0x18a0
hfsplus_fill_super+0xcb4/0x18a0
? __pfx_hfsplus_fill_super+0x10/0x10
? srso_return_thunk+0x5/0x5f
? bdev_open+0x65f/0xc30
? srso_return_thunk+0x5/0x5f
? pointer+0x4ce/0xbf0
? trace_contention_end+0x11c/0x150
? __pfx_pointer+0x10/0x10
? srso_return_thunk+0x5/0x5f
? bdev_open+0x79b/0xc30
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? vsnprintf+0x6da/0x1270
? srso_return_thunk+0x5/0x5f
? __mutex_unlock_slowpath+0x157/0x740
? __pfx_vsnprintf+0x10/0x10
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? mark_held_locks+0x49/0x80
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? irqentry_exit+0x17b/0x5e0
? trace_irq_disable.constprop.0+0x116/0x150
? __pfx_hfsplus_fill_super+0x10/0x10
? __pfx_hfsplus_fill_super+0x10/0x10
get_tree_bdev_flags+0x302/0x580
? __pfx_get_tree_bdev_flags+0x10/0x10
? vfs_parse_fs_qstr+0x129/0x1a0
? __pfx_vfs_parse_fs_qstr+0x3/0x10
vfs_get_tree+0x89/0x320
fc_mount+0x10/0x1d0
path_mount+0x5c5/0x21c0
? __pfx_path_mount+0x10/0x10
? trace_irq_enable.constprop.0+0x116/0x150
? trace_irq_enable.constprop.0+0x116/0x150
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? kmem_cache_free+0x307/0x540
? user_path_at+0x51/0x60
? __x64_sys_mount+0x212/0x280
? srso_return_thunk+0x5/0x5f
__x64_sys_mount+0x212/0x280
? __pfx___x64_sys_mount+0x10/0x10
? srso_return_thunk+0x5/0x5f
? trace_irq_enable.constprop.0+0x116/0x150
? srso_return_thunk+0x5/0x5f
do_syscall_64+0x111/0x680
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ffacad55eae
Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 8
RSP: 002b
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: s3c64xx: fix NULL-deref on driver unbind
A change moving DMA channel allocation from probe() back to
s3c64xx_spi_prepare_transfer() failed to remove the corresponding
deallocation from remove().
Drop the bogus DMA channel release from remove() to avoid triggering a
NULL-pointer dereference on driver unbind.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: stop tp_meter sessions during mesh teardown
TP meter sessions remain linked on bat_priv->tp_list after the netlink
request has already finished. When the mesh interface is removed,
batadv_mesh_free() currently tears down the mesh without first draining
these sessions.
A running sender thread or a late incoming tp_meter packet can then keep
processing against a mesh instance which is already shutting down.
Synchronize tp_meter with the mesh lifetime by stopping all active
sessions from batadv_mesh_free() and waiting for sender threads to exit
before teardown continues. |
