| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell PowerStore SDNAS contains an OS Command Injection vulnerability that could allow an attacker with internal network access to execute arbitrary commands as root on the NAS node. |
| In JetBrains TeamCity before 2026.2 remote code execution on build agents was possible via service message injection in build configuration names |
| In JetBrains TeamCity before 2026.2, 2026.1.4 stored XSS in the JVM update warning on the Agent Summary page was possible |
| In JetBrains TeamCity before 2026.2 stored XSS on the Duplicates report tab was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in build statistics charts was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS on the build Issues tab was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.4 stored XSS in the Xcode runner configuration selection was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the Finish Build Trigger editor was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.5 stored XSS on the external Kotlin DSL editor status page was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the Promote build dialog for dependent builds was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the Agent Statistics tooltip was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the checkout rules editor was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the build Report Tab dialog was possible |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the project Report Tab dialog was possible |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pnfs: bound the CB_NOTIFY_DEVICEID array count before allocating
decode_devicenotify_args() hands the server's notification count
straight to kmalloc_objs() as the array length, without checking it
against the message that carried it. Bound it the way nfs4xdr.c bounds
an attribute length, against xdr_stream_remaining(). |
| In the Linux kernel, the following vulnerability has been resolved:
pnfs/blocklayout: Complete a device upcall when the pipe is closed
Once blkmapd has read a whole upcall, rpc_pipe_read() unlinks the
message from every pipe list, so the purges in rpc_pipe_release()
and rpc_close_pipes() no longer reach it. bl_upcall_ops supplies no
.release_pipe callback, and bl_pipe_destroy_msg() returns without
completing the upcall because a downcall is expected to follow. A
daemon that exits between the read and the write therefore strands
its waiter: bl_resolve_deviceid() sleeps in wait_for_completion()
and never returns, and it holds nn->bl_mutex across that wait, so
every later device resolution in the net namespace blocks behind
it.
Add a .release_pipe that completes an upcall blkmapd has consumed
and left unanswered. Completing an upcall retires it, so a message
the framework has already purged is no longer in flight and is not
completed a second time here. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate SMB1 EA list bounds before parsing
CIFSSMBQAllEAs() checks the server-provided EA list length by adding it
to the response pointer. On 32-bit systems, a positive length can wrap
the pointer and pass the comparison. The parser then walks outside the
received response while reading the next FEA header.
A response with a list length of 0x40000000 reproduces this as a native
i386 page fault and kernel panic from listxattr() against an SMB1
server.
Check that the EA list starts within the SMB byte area before reading
its header. Keep its length unsigned and compare it with the bytes left
in the response without pointer addition.
SMB1 is not negotiated by default and requires an explicit vers=1.0
mount. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate NT transaction response layout and offsets
validate_ntransact() assumes that the response uses the fixed 18-word NT
transaction layout. A different WordCount makes get_bcc() locate the byte
count at a different offset from pSMBr->ByteCount, allowing the subsequent
bounds checks to use inconsistent response boundaries.
The function also turns the 32-bit ParameterOffset and DataOffset fields
into pointers before checking their bounds. On a 32-bit client, a large
offset can wrap the pointer below end_of_smb and pass the one-sided pointer
comparison. The caller then dereferences the parameter pointer or copies
from the data pointer.
Require the expected WordCount before reading the byte count. Check each
offset and count against the received SMB length as integers before forming
either pointer. Use subtraction after validating the offset so that the
range checks cannot overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject short or out-of-range FIND response parameters
CIFSFindFirst() and CIFSFindNext() read the SearchHandle, SearchCount,
EndofSearch and LastNameOffset of a TRANS2_FIND_FIRST2 or
TRANS2_FIND_NEXT2 response at ParameterOffset. validate_t2() bounds
the offset at 1024 and ParameterCount below 512, and nothing compares
them with the number of bytes SendReceive() copied into the buffer or
with the size of the response parameters. smb_init() places the
request and the response in the same cifs_request allocation and
cifs_buf_get() clears only the start of it, so a short response with a
ParameterOffset past its end has the search handle, the entry count,
the end-of-search flag and the last-entry offset read out of the
request that was just sent, or out of whatever the allocation held
before, and a ParameterCount smaller than the parameters has them read
past the end of the parameter block. The reads stay inside the
allocation, but what they return is not part of the response, and
CIFSFindFirst() then hands back a search handle the server never sent.
That handle is sent back to the server in the next FIND_NEXT2 or
FIND_CLOSE2, so two bytes of the buffer leak at an offset the server
picks.
SMB1 is not negotiated by default; reaching this code requires an
explicit vers=1.0 mount.
Reject a response whose parameter area is smaller than the response
parameters or extends past the received length, returning smb_EIO2()
with a new smb_eio_traces value for each of the two responses, like
the other response checks this file gained since v6.19. Backports to
trees before v6.19 need smb_EIO2() replaced with -EINVAL and the
trace.h hunk dropped.
A conforming server is not affected. The parameter block of a
transaction response is part of the SMB, so ParameterOffset +
ParameterCount cannot exceed the smbCalcSize() bytes that
SendReceive() copies, and the response parameters are 10 bytes for
FIND_FIRST2 and 8 bytes for FIND_NEXT2, which is what
T2_FFIRST_RSP_PARMS and T2_FNEXT_RSP_PARMS hold.
This patch depends on "smb: client: reject FIND data areas that run
past the received response", whose declarations it extends. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject FIND data areas that run past the received response
CIFSFindFirst() and CIFSFindNext() take the directory entries of a
TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response from DataOffset for
DataCount bytes. validate_t2() bounds DataOffset at 1024 and
ParameterCount + DataCount by the byte count, and nothing compares
DataOffset + DataCount with the number of bytes SendReceive() copied
into the buffer.
smb_init() places the request and the response in the same
cifs_request allocation and cifs_buf_get() clears only the start of
it, so a short response whose data area extends past its end has
srch_entries_start point at bytes of the request that was just sent,
or at whatever the allocation held before, and those bytes are parsed
as directory entries. cifs_readdir() and find_cifs_entry() walk the
entries with nxt_dir_entry(), which checks every entry but the first
of a response against the end of the SMB; cifs_query_path_info() and
cifs_backup_query_path_info() read the first entry with no check at
all. Those reads stay inside the allocation, but what they return is
not part of the response. The last entry, which LastNameOffset locates
relative to the data area, is bounded against the received response
by an earlier patch of this series, as is every entry that
cifs_fill_dirent() parses; the walk itself and the two query functions
are not.
SMB1 is not negotiated by default; reaching this code requires an
explicit vers=1.0 mount.
Reject a response whose data area extends past the received length,
with the -EINVAL that validate_t2() returns for the other malformed
transaction responses. cifs_query_path_info() and
cifs_backup_query_path_info() still read a whole entry from a data
area that may be smaller than one; that is not changed here.
A conforming server is not affected. The data block of a transaction
response is part of the SMB, so DataOffset + DataCount cannot exceed
the smbCalcSize() bytes that SendReceive() copies; coalesce_t2()
appends each secondary response to the data area and adds its length
to both DataCount and the byte count, which keeps that relation. |