| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks
check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks
it with newmap->possible_max_rank, which comes straight off the wire:
ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then
overwrites it with the size of the "in" set. Neither is bounded by
CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks
than the bitmap holds makes test_bit() read past the end of targets[]. The
clear_bit() loop above indexes the same bitmap, though it is additionally
bounded by mdsc->max_sessions. The map arrives on the monitor connection,
which is unauthenticated in legacy msgr mode.
CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the
reserved inode ranges in super.h are laid out one rank apart over that
span, so a map claiming more ranks is corrupt. Reject it where the rank
space is established rather than letting the count reach check_new_map().
BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968)
Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200)
check_new_map (fs/ceph/mds_client.c:5968)
ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060)
extra_mon_dispatch (fs/ceph/super.c:802)
mon_dispatch (net/ceph/mon_client.c:1483)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
The buggy address belongs to stack of task kworker/1:2/127
and is located at offset 288 in frame:
check_new_map (fs/ceph/mds_client.c:5846)
This frame has 1 object:
[32, 288) 'targets' |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: hold cl_lock in client_has_openowners()
client_has_openowners() walks clp->cl_openowners and reads so_stateids
without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under
cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched
creds can use-after-free the nfs4_openowner.
BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140
fs/nfsd/nfs4state.c:3718 client_has_openowners()
nfsd4_exchange_id
nfsd4_proc_compound
nfsd_dispatch
svc_process
Take clp->cl_lock while client_has_openowners() walks the openowner
list. |
| A improper certificate validation vulnerability in Fortinet FortiAnalyzer 8.0.0 through 8.0.1, FortiAnalyzer 7.6.0 through 7.6.7, FortiAnalyzer 7.4.0 through 7.4.11, FortiAnalyzer Cloud 8.0.1, FortiAnalyzer Cloud 7.6.0 through 7.6.7, FortiAnalyzer Cloud 7.4.1 through 7.4.11, FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11, FortiManager Cloud 8.0.1, FortiManager Cloud 7.6.0 through 7.6.7, FortiManager Cloud 7.4.1 through 7.4.11 may allow a MITM attacker to impersonate the radius server via a rogue RADIUS server. |
| Authorization bypass through user-controlled key in the localhost port-proxy (/p/<token>/) in Posit Software, PBC RStudio Server and Posit Workbench before 2026.08.0 allows remote authenticated users to reach web applications and other services bound to 127.0.0.1 under a different user's session, and to view their live rendered content and data, via a proxy URL constructed from the attacker's own port token for an arbitrary port number. The port token is a documented obfuscation measure and not an authorization boundary, and the proxy does not verify that the requested port belongs to the requesting user's session.
NOTE: exploitation requires an authenticated account on the same multi-user server and a target service listening on localhost at the time of access. Impact may be greater on hosts that co-locate additional privileged localhost services, and the bypass is not prevented by allow-shell=false; no setting restricts the port-proxy without disabling all application proxying. |
| Kalmia through 0.2.0 contains a privilege escalation vulnerability that allows low-privileged authenticated users to modify any account via the /kal-api/auth/user/edit endpoint. Attackers holding only read permission can set their admin flag and 'all' permission or reset an administrator's password to fully take over the instance. |
| Kalmia through 0.2.0 contains a stored cross-site scripting vulnerability that allows read-only authenticated users to upload HTML or SVG files via the upload-file endpoint without type restrictions. Attackers can share links to files served unauthenticated through the file get route, executing JavaScript in the admin origin to steal administrator JWTs from localStorage. |
| Tensei through 0.11.5 contains an unrestricted file upload vulnerability in the @tensei/media plugin that allows unauthenticated attackers to upload dangerous file types via the files/upload route. Attackers can set the multipart Content-Type to upload HTML or SVG files served from the application origin, causing stored cross-site scripting and storage consumption. |
| Tensei through 0.11.5 contains an open redirect vulnerability in the @tensei/social-auth SocialAuthCallbackController that allows unauthenticated attackers to redirect users by supplying an unvalidated clientCallback query parameter. Attackers can craft links to the /:provider/callback route that send victims to attacker-controlled sites for phishing and leak the issued temporary access token appended after login. |
| SQL injection vulnerability in the get_last_seen code-server session-state RPC in Posit Software, PBC Posit Workbench before 2026.08.0 allows authenticated users to read arbitrary data from the Workbench database via the sessionIds parameter.
NOTE: exploitation requires a valid authenticated session; no administrative privileges are needed. The vulnerability is limited to disclosure of database contents. |
| Apache WSS4J remembers the UsernameToken Nonce, the Timestamp and signature of a signed message, and the ID of a SAML 2.0 "OneTimeUse" assertion, so that a captured message cannot be accepted twice. It checked whether a value had already been seen, validated the message, and only then remembered the value, as two separate steps. If several copies of the same message were processed at the same time, they could all pass the check before any of them was remembered, and all be accepted. An attacker who obtained a valid message before the recipient first processed it could send several copies at once, so that the same authenticated request was executed more than once. Where a UsernameToken is not bound to the message by a signature, the copies could carry different message bodies. The attacker needs to obtain the message while it is still in transit; a message captured after it has been accepted cannot be replayed. Affects deployments with a replay cache configured, as Apache CXF has by default. The value is now checked and remembered in a single atomic step. Custom ReplayCache implementations should override the new ReplayCache.addIfAbsent method with an operation that is atomic in their underlying store. Users are recommended to upgrade to versions 4.0.3 or 3.0.7 or 2.4.5, which fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix app-instance non-durable supersede session UAF
ksmbd_close_fd_app_instance_id() supersedes a prior open that has the
same AppInstanceId. It reaches that open's session through opinfo->sess.
This pointer is not refcounted.
Session teardown detaches durable handles before it frees the session.
It does not detach a non-durable open. That open still points at the
session through opinfo->sess after the session is freed. Another session
can supersede the open at the same time. The supersede then takes a
write lock through the stale pointer, in the freed session's file table.
BUG: KASAN: slab-use-after-free in _raw_write_lock+0x71/0xd0
Call Trace:
_raw_write_lock+0x71/0xd0
ksmbd_close_fd_app_instance_id+0xd9/0x670 [ksmbd]
smb2_open+0x3e10/0xd910 [ksmbd]
Freed by task 212:
ksmbd_session_destroy+0x38d/0x480 [ksmbd]
Fix this by looking the session up by opinfo->session_id. The lookup
returns a reference, as smb2_break_collect_channels() does. Recheck that
opinfo->sess still points at it before using it.
Do the lookup without m_lock held. destroy_previous_session() takes
m_lock under the session table lock, and taking them in the other order
here would deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix slab-out-of-bounds write in id_mode_to_cifs_acl()
In id_mode_to_cifs_acl(), while the chown branch reserves
sizeof(struct smb_ntsd) + 2 * sizeof(struct smb_sid) (plus
sizeof(struct smb_acl) and the worst-case ACE space after
commit 0ee150794c75 ("smb: client: fix heap overflow in DACL owner/group
rewrite")), the chmod branch only adds 2 * sizeof(struct smb_ace) or
5 * sizeof(struct smb_ace) to secdesclen (or 1 * sizeof(struct smb_ace)
on posix).
However, the chmod branch also invokes build_sec_desc() ->
copy_sec_desc(), which unconditionally writes the Owner SID at
pnntsd + sidsoffset and the Group SID at
pnntsd + sidsoffset + sizeof(struct smb_sid) (2 * 68 = 136 bytes total),
and set_chmod_dacl() always writes a struct smb_acl header (8 bytes)
even when the source descriptor has dacloffset == 0. When a security
descriptor has compact or overlapping Owner/Group SIDs (or
dacloffset == 0), calling chmod() under-allocates pnntsd and writes past
the end of the slab buffer.
Reserve sizeof(struct smb_acl) + 2 * sizeof(struct smb_sid) (plus
sizeof(struct smb_ntsd) on the posix path) in the chmod branch of
id_mode_to_cifs_acl(). |
| A use of hard-coded credentials vulnerability in Fortinet FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11 may allow an adjacent-network authenticated attacker with user permission to join the FGFM configuration-sync mesh of the affected FortiGate deployment via the default pre-shared key. |
| The Essential Addons for Elementor WordPress plugin before 6.8.7 does not restrict the post type or meta query an unauthenticated visitor can pass to its pagination endpoint, which could allow them to read content of non-public post types and recover the values of private custom fields on published posts. |
| The Welcart e-Commerce WordPress plugin before 2.12.6 does not properly sanitise and escape a parameter before using it in a SQL query, and strips the escaping it had applied before running the query, allowing users with the Editor role or higher to perform SQL injection attacks. |
| The Welcart e-Commerce WordPress plugin before 2.12.6 does not validate a user-supplied URL before using it in a redirect, allowing unauthenticated attackers to redirect users to arbitrary external websites. |
| The Welcart e-Commerce WordPress plugin before 2.12.6 does not properly verify authorization against the targeted product before processing SKU changes, because its capability check is not tied to the product being edited, allowing any authenticated user with Author-level access or higher to read, modify, create, delete and re-order the SKU data (including prices, confidential cost prices and stock levels) of any product, including those belonging to other users. |
| The Recipe Card Blocks Lite WordPress plugin before 3.6.4 does not sanitize and cast a block and shortcode attribute before concatenating it into SQL queries, allowing authenticated users with Contributor-level access or above to perform SQL injection attacks. |
| The Mage Eventpress plugin for WordPress is vulnerable to privilege escalation in versions up to, and including, 5.7.8 This is due to the mep_grant_shop_manager_access() function hooking user_has_cap and unconditionally granting manage_options whenever an attacker-controllable request marker matches — most notably $_GET['page'] starting with 'mep_' or 'mpwem_', which is never validated against an actually registered EventPress screen. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to elevate their privileges to Administrator by appending ?page=mep_x to core admin URLs (options-general. |
| The Recipe Card Blocks Lite WordPress plugin before 3.6.4 does not perform an authorization check before rendering posts through its recipe print feature, allowing unauthenticated users to disclose the title, ID and recipe content of unpublished posts, including drafts, pending, private and password-protected posts, that contain a recipe card block. Its optional "print only published posts" protection does not prevent this, because the status check is applied to a different post than the one ultimately rendered. |