| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the NetX Secure TLS client's ServerHello parser and DTLS client's HelloVerifyRequest parser read fields before checking that the message is long enough to contain them. A malicious server or an on-path attacker can make the client read up to three bytes past a handshake message, which can fault the client on targets with memory protection. |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the PPP IPCP code parses a peer's Configure-Nak without validating each option's length. A malicious PPP peer can stall the PPP thread indefinitely with a zero-length option, taking the link down, and can read back up to four bytes of packet-buffer memory per exchange with a short address option. |
| In Eclipse ThreadX NetX Duo versions 6.4.0 through 6.5.2.202603a, built with VLAN and SRP support, the MSRP parser uses the attribute list length from the received frame without comparing it with the packet length. An unauthenticated station on the same Layer 2 segment can send a short MSRP frame declaring a long list and make the MRP worker read far past the received packet, faulting it on targets with memory protection. |
| In isValid of ShimConverter.cpp, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Sogou Input Method for Windows contains a vulnerability in the configuration retrieval mechanism of its SGTool.exe component. The application retrieves configuration data over unencrypted HTTP connections, allowing an attacker capable of manipulating network traffic to replace legitimate server responses with malicious configurations. An attacker can exploit this vulnerability to instruct SGTool.exe to download attacker-controlled files to arbitrary locations, including paths used by legitimate application components. This can result in arbitrary code execution when the downloaded files are subsequently executed or loaded by the application. |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the TFTP client copies the message of a received ERROR packet without bounding the copy by the end of the datagram, and the TFTP server reads one byte past a minimal ERROR packet. A malicious TFTP server can make the client copy up to 64 bytes of adjacent packet-pool memory into the error string the application retrieves, or fault on targets with memory protection. |
| Pixar Animation Studio OpenUSD Crate File Parsing Double Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Pixar Animation Studio OpenUSD. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of USDC and USDZ files. The issue results from the lack of validating the existence of an object prior to performing further free operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-30428. |
| CSV formula injection vulnerability in the export functionality of the Coupa Supplier Portal SaaS platform. The vulnerability arises because certain user-controlled data, such as event names or templates within the Tenders module, are not properly validated or sanitised before being included in CSV files generated by the application. An attacker with low privileges can input specially crafted values that begin with characters interpreted as formulas by spreadsheet applications. When a victim downloads and opens the generated file in a compatible client, the content may be interpreted as a formula, potentially leading to unauthorised actions such as the execution of commands via mechanisms such as DDE, access to information, or interaction with system resources under the victim’s context. |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the DHCP client's option walk advances its offset one byte less than its read pointer for every option it skips. A DHCP server, or any host on the link that answers first, can make the client read up to about a kilobyte past the received message, and the same walk copies out-of-bounds bytes into the application's buffer when it retrieves a user option. |
| In multiple functions of hppsfilter.c, there is a possible out-of-bounds write due to a stack buffer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager loaders take a module image without its length and trust the sizes and offsets in its preamble. A crafted module image can declare a code size larger than the image to read, or gain access to, the memory that follows it, and can place its entry points outside its code. |
| Kore before 4.3.0 contains an integer underflow vulnerability in HTTP request body handling that allows unauthenticated attackers to bypass http_body_max by sending more body bytes than declared. Attackers can send oversized first segments over many concurrent POST, PUT or DELETE connections, wrapping content_length to grow buffers unbounded and exhaust worker memory. |
| The RTIO submission-queue verifier rtio_vrfy_sqe() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) accumulated the results of K_SYSCALL_MEMORY() into its valid_sqe flag with &=. That macro returns nonzero on failure (it is built on K_SYSCALL_VERIFY_MSG(), which yields !(expr)), so every buffer permission check contributed the opposite of its result. A submission whose tx.buf, rx.buf or txrx.tx_buf/txrx.rx_buf pointer was not accessible to the calling thread was accepted, while a legitimate, thread-owned buffer caused the calling thread to be killed with a kernel oops.
The verifier runs on behalf of the rtio_sqe_copy_in_get_handles() system call (also reached through the inline rtio_sqe_copy_in() wrapper), so it is driven directly by untrusted user-mode input on any image built with CONFIG_USERSPACE. A user thread that has been granted an RTIO context and an rtio_iodev object — the intended usage of RTIO userspace support, established via rtio_access_grant() — can submit an SQE whose buffer pointer and length name arbitrary kernel memory; the object check on sqe->iodev is unaffected and still passes, and the crafted SQE is forwarded to the bus driver unchanged.
Downstream consumers dereference the pointer with supervisor privilege. The generic I2C and I3C RTIO fallback handlers (drivers/i2c/i2c_rtio_default.c, drivers/i3c/i3c_rtio_default.c) copy sqe.rx.buf/sqe.tx.buf into struct i2c_msg and call i2c_transfer(), and the vendor SPI/I2C RTIO drivers behave equivalently. An RTIO_OP_RX submission therefore has peripheral data written into kernel memory of the attacker's choosing (arbitrary kernel write), an RTIO_OP_TX submission clocks kernel memory out over the bus (kernel memory disclosure), and a pointer to unmapped memory faults the kernel. This is a full escape from the user-mode isolation boundary that CONFIG_USERSPACE exists to enforce.
The defect was masked for years because the in-tree user-mode RTIO tests only exercise RTIO_OP_NOP and mempool-backed reads, neither of which reaches the affected checks. The fix negates each K_SYSCALL_MEMORY() result and additionally validates the TXRX transmit buffer read-only, matching the SPI, I2C and I3C handlers. |
| IRISPowerscan contain
default user accounts with predictable credentials. An unauthenticated attacker
with access to an affected installation could use these credentials to
authenticate to the application and access functionality available to the
affected accounts, potentially resulting in unauthorised access or modification
of application data and configuration. |
| CGI::Cookie versions from 4.67 before 5.00 for Perl allow denial of service via the client cookie expires value used as a regex in parse.
CGI's cookie method reads the Cookie request header through parse, which interpolates the header's expires value unescaped into the substitution pattern that removes it from the cookie string.
A client can make the request die with an invalid pattern, or tie up the process with one that backtracks catastrophically. |
| CGI versions before 5.00 for Perl allow CPU exhaustion via a backtracking regex on the XForms multipart/related Content-Type.
When a POST Content-Type contains multipart/related, the boundary and start parameters are extracted with an unanchored pattern that puts .+ on either side of the boundary capture, which backtracks in cubic time on a header that does not match. No request body is needed. |
| CGI versions before 5.00 for Perl allow open redirects via HTML entity decoding of the URL after application validation in redirect.
redirect decodes HTML entities in its URL before writing the Location header, so a URL the application has already validated can change meaning. For example, //evil.example/ becomes //evil.example/ and sends the user to another host. |
| CGI versions before 5.00 for Perl allow HTTP header injection via entity decoding after the newline check in header and unchecked values in multipart_start and do_push.
With autoEscape off, header decodes HTML entities in extra header values after its newline check, so an encoded CR or LF reaches the response. multipart_start does not check header values for newlines, and do_push does not check the type it prints in each part.
An application that passes request data into these header values can be made to add headers or split the response. |
| CGI::Cookie versions before 5.00 for Perl allow cookie attribute injection via unvalidated path, domain and expires values.
The path, domain and expires values are written into the Set-Cookie header without checking for semicolons or control characters.
An application that sets them from request data can be made to add other cookie attributes, such as Domain or SameSite. |
| CGI versions before 5.00 for Perl return request-derived values untainted under taint mode.
The upload filename, uploadInfo values, some path_info and script_name values, Accept results, and the name lists from url_param and cookie are returned without the taint flag, as is a cookie named expires from 4.67 on.
These values come from regex captures or hash keys, which Perl does not taint, so they pass -T checks unvalidated. |
