| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: fix skb memory leak in deferred qdisc drops
When the network stack cleans up the deferred list via qdisc_run_end(),
it operates on the root qdisc. If the root qdisc do not implement the
TCQ_F_DEQUEUE_DROPS flag the packets queue to free are never freed and
gets stranded on the child's local to_free list.
Fix this by making qdisc_dequeue_drop() aware of the root qdisc. It
fetches the root qdisc and check for the TCQ_F_DEQUEUE_DROPS flag. If
the flag is present, the packet is appended directly to the root's
to_free list. Otherwise, drop it directly as it was done before the
optimization was implemented. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix durable fd leak on ClientGUID mismatch in durable v2 open
ksmbd_lookup_fd_cguid() returns a ksmbd_file with its refcount
incremented via ksmbd_fp_get(). parse_durable_handle_context() in
the DURABLE_REQ_V2 case properly releases this reference on every
path inside the ClientGUID-match branch, either by calling
ksmbd_put_durable_fd() or by transferring ownership to dh_info->fp
for a successful reconnect. However, when an entry exists in the
global file table with the same CreateGuid but a different
ClientGUID, the code simply falls through to the new-open path
without dropping the reference obtained from ksmbd_lookup_fd_cguid().
Per MS-SMB2 section 3.3.5.9.10 ("Handling the
SMB2_CREATE_DURABLE_HANDLE_REQUEST_V2 Create Context"), the server
MUST locate an Open whose Open.CreateGuid matches the request's
CreateGuid AND whose Open.ClientGuid matches the ClientGuid of the
connection that received the request. If no such Open is found, the
server MUST continue with the normal open execution phase. A
CreateGuid hit with a ClientGUID mismatch is therefore the
"Open not found" case: proceeding with a new open is correct, but
the reference obtained purely as a side effect of the lookup must
not be leaked.
Repeated requests that hit this mismatch pin global_ft entries,
prevent __ksmbd_close_fd() from ever running for the corresponding
files, and defeat the durable scavenger, leading to long-lived
resource leaks.
Release the reference in the mismatch path and clear dh_info->fp so
subsequent logic does not mistake a non-matching lookup result for
a reconnect target. |
| ImageMagick before 7.1.2-15 contains a memory leak vulnerability in multiple coders that write raw pixel data where allocated objects are not properly freed. Attackers can trigger this leak by processing specially crafted images, causing memory exhaustion and denial of service. |
| A memory leak flaw was found in Libtiff's tiffcrop utility. This issue occurs when tiffcrop operates on a TIFF image file, allowing an attacker to pass a crafted TIFF image file to tiffcrop utility, which causes this memory leak issue, resulting an application crash, eventually leading to a denial of service. |
| There is a memory leak in NI grpc-device BeginSidebandStream that may result in denial of service due to memory exhaustion. This affects NI grpc-device 2.17.0 and prior versions. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix a resource leak in xfs_alloc_buftarg()
In the error path, call fs_put_dax() to drop the DAX
device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/versalnet: Fix device_node leak in mc_probe()
of_parse_phandle() returns a device_node reference that must be released with
of_node_put(). The original code never freed r5_core_node on any exit path,
causing a memory leak.
Fix this by using the automatic cleanup attribute __free(device_node) which
ensures of_node_put() is called when the variable goes out of scope. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-aes - Fix 3-page memory leak in atmel_aes_buff_cleanup
atmel_aes_buff_init() allocates 4 pages using __get_free_pages() with
ATMEL_AES_BUFFER_ORDER, but atmel_aes_buff_cleanup() frees only the
first page using free_page(), leaking the remaining 3 pages. Use
free_pages() with ATMEL_AES_BUFFER_ORDER to fix the memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix memory leaks in weighted_interleave_auto_store()
weighted_interleave_auto_store() fetches old_wi_state inside the if
(!input) block only. This causes two memory leaks:
1. When a user writes "false" and the current mode is already manual,
the function returns early without freeing the freshly allocated
new_wi_state.
2. When a user writes "true", old_wi_state stays NULL because the
fetch is skipped entirely. The old state is then overwritten by
rcu_assign_pointer() but never freed, since the cleanup path is
gated on old_wi_state being non-NULL. A user can trigger this
repeatedly by writing "1" in a loop.
Fix both leaks by moving the old_wi_state fetch before the input check,
making it unconditional. This also allows a unified early return for both
"true" and "false" when the requested mode matches the current mode.
Reviewed by: Donet Tom <donettom@linux.ibm.com> |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccree - fix a memory leak in cc_mac_digest()
Add cc_unmap_result() if cc_map_hash_request_final()
fails to prevent potential memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix memory leak in amdgpu_ras_init()
When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the function
returns directly without freeing the allocated con structure, leading
to a memory leak.
Fix this by jumping to the release_con label to properly clean up the
allocated memory before returning the error code.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
`css_alloc_subchannel()` calls `device_initialize()` before setting up
the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,
the error path frees the subchannel structure directly, bypassing
the device model reference counting.
Once `device_initialize()` has been called, the embedded struct device
must be released via `put_device()`, allowing the release callback to
free the container structure.
Fix the error path by dropping the initial device reference with
`put_device()` instead of calling `kfree()` directly.
This ensures correct device lifetime handling and avoids potential
use-after-free or double-free issues. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix memory leak in amdgpu_acpi_enumerate_xcc()
In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM,
the function returns directly without releasing the allocated xcc_info,
resulting in a memory leak.
Fix this by ensuring that xcc_info is properly freed in the error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix memory leak in ext4_ext_shift_extents()
In ext4_ext_shift_extents(), if the extent is NULL in the while loop, the
function returns immediately without releasing the path obtained via
ext4_find_extent(), leading to a memory leak.
Fix this by jumping to the out label to ensure the path is properly
released. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
The starfive_aes_aead_do_one_req() function allocates rctx->adata with
kzalloc() but fails to free it if sg_copy_to_buffer() or
starfive_aes_hw_init() fails, which lead to memory leaks.
Since rctx->adata is unconditionally freed after the write_adata
operations, ensure consistent cleanup by freeing the allocation in these
earlier error paths as well.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe()
In au1200fb_drv_probe(), when platform_get_irq fails(), it directly
returns from the function with an error code, which causes a memory
leak.
Replace it with a goto label to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
Commit 5940d1cf9f42 ("SUNRPC: Rebalance a kref in auth_gss.c") added
a kref_get(&gss_auth->kref) call to balance the gss_put_auth() done
in gss_release_msg(), but forgot to add a corresponding kref_put()
on the error path when kstrdup_const() fails.
If service_name is non-NULL and kstrdup_const() fails, the function
jumps to err_put_pipe_version which calls put_pipe_version() and
kfree(gss_msg), but never releases the gss_auth reference. This leads
to a kref leak where the gss_auth structure is never freed.
Add a forward declaration for gss_free_callback() and call kref_put()
in the err_put_pipe_version error path to properly release the
reference taken earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/scatterlist: fix length calculations in extract_kvec_to_sg
Patch series "Fix bugs in extract_iter_to_sg()", v3.
Fix bugs in the kvec and user variants of extract_iter_to_sg. This series
is growing due to useful remarks made by sashiko.dev.
The main bugs are:
- The length for an sglist entry when extracting from
a kvec can exceed the number of bytes in the page. This
is obviously not intended.
- When extracting a user buffer the sglist is temporarily
used as a scratch buffer for extracted page pointers.
If the sglist already contains some elements this scratch
buffer could overlap with existing entries in the sglist.
The series adds test cases to the kunit_iov_iter test that demonstrate all
of these bugs. Additionally, there is a memory leak fix for the test
itself.
The bugs were orignally introduced into kernel v6.3 where the function
lived in fs/netfs/iterator.c. It was later moved to lib/scatterlist.c in
v6.5. Thus the actual fix is only marked for backports to v6.5+.
This patch (of 5):
When extracting from a kvec to a scatterlist, do not cross page
boundaries. The required length was already calculated but not used as
intended.
Adjust the copied length if the loop runs out of sglist entries without
extracting everything.
While there, return immediately from extract_iter_to_sg if there are no
sglist entries at all.
A subsequent commit will add kunit test cases that demonstrate that the
patch is necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
intel_th: fix device leak on output open()
Make sure to drop the reference taken when looking up the th device
during output device open() on errors and on close().
Note that a recent commit fixed the leak in a couple of open() error
paths but not all of them, and the reference is still leaking on
successful open(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb_8dev: usb_8dev_read_bulk_callback(): fix URB memory leak
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In usb_8dev_open() -> usb_8dev_start(), the URBs for USB-in transfers are
allocated, added to the priv->rx_submitted anchor and submitted. In the
complete callback usb_8dev_read_bulk_callback(), the URBs are processed and
resubmitted. In usb_8dev_close() -> unlink_all_urbs() the URBs are freed by
calling usb_kill_anchored_urbs(&priv->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
usb_8dev_read_bulk_callback() to the priv->rx_submitted anchor. |
