| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm80xx: Set phy->enable_completion only when we wait for it
pm8001_phy_control() populates the enable_completion pointer with a stack
address, sends a PHY_LINK_RESET / PHY_HARD_RESET, waits 300 ms, and
returns. The problem arises when a phy control response comes late. After
300 ms the pm8001_phy_control() function returns and the passed
enable_completion stack address is no longer valid. Late phy control
response invokes complete() on a dangling enable_completion pointer which
leads to a kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
media: xc2028: avoid use-after-free in load_firmware_cb()
syzkaller reported use-after-free in load_firmware_cb() [1].
The reason is because the module allocated a struct tuner in tuner_probe(),
and then the module initialization failed, the struct tuner was released.
A worker which created during module initialization accesses this struct
tuner later, it caused use-after-free.
The process is as follows:
task-6504 worker_thread
tuner_probe <= alloc dvb_frontend [2]
...
request_firmware_nowait <= create a worker
...
tuner_remove <= free dvb_frontend
...
request_firmware_work_func <= the firmware is ready
load_firmware_cb <= but now the dvb_frontend has been freed
To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is
null, report a warning and just return.
[1]:
==================================================================
BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0
Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504
Call trace:
load_firmware_cb+0x1310/0x17a0
request_firmware_work_func+0x128/0x220
process_one_work+0x770/0x1824
worker_thread+0x488/0xea0
kthread+0x300/0x430
ret_from_fork+0x10/0x20
Allocated by task 6504:
kzalloc
tuner_probe+0xb0/0x1430
i2c_device_probe+0x92c/0xaf0
really_probe+0x678/0xcd0
driver_probe_device+0x280/0x370
__device_attach_driver+0x220/0x330
bus_for_each_drv+0x134/0x1c0
__device_attach+0x1f4/0x410
device_initial_probe+0x20/0x30
bus_probe_device+0x184/0x200
device_add+0x924/0x12c0
device_register+0x24/0x30
i2c_new_device+0x4e0/0xc44
v4l2_i2c_new_subdev_board+0xbc/0x290
v4l2_i2c_new_subdev+0xc8/0x104
em28xx_v4l2_init+0x1dd0/0x3770
Freed by task 6504:
kfree+0x238/0x4e4
tuner_remove+0x144/0x1c0
i2c_device_remove+0xc8/0x290
__device_release_driver+0x314/0x5fc
device_release_driver+0x30/0x44
bus_remove_device+0x244/0x490
device_del+0x350/0x900
device_unregister+0x28/0xd0
i2c_unregister_device+0x174/0x1d0
v4l2_device_unregister+0x224/0x380
em28xx_v4l2_init+0x1d90/0x3770
The buggy address belongs to the object at ffff8000d7ca2000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 776 bytes inside of
2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800)
The buggy address belongs to the page:
page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0
flags: 0x7ff800000000100(slab)
raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[2]
Actually, it is allocated for struct tuner, and dvb_frontend is inside. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix inode number range checks
Patch series "nilfs2: fix potential issues related to reserved inodes".
This series fixes one use-after-free issue reported by syzbot, caused by
nilfs2's internal inode being exposed in the namespace on a corrupted
filesystem, and a couple of flaws that cause problems if the starting
number of non-reserved inodes written in the on-disk super block is
intentionally (or corruptly) changed from its default value.
This patch (of 3):
In the current implementation of nilfs2, "nilfs->ns_first_ino", which
gives the first non-reserved inode number, is read from the superblock,
but its lower limit is not checked.
As a result, if a number that overlaps with the inode number range of
reserved inodes such as the root directory or metadata files is set in the
super block parameter, the inode number test macros (NILFS_MDT_INODE and
NILFS_VALID_INODE) will not function properly.
In addition, these test macros use left bit-shift calculations using with
the inode number as the shift count via the BIT macro, but the result of a
shift calculation that exceeds the bit width of an integer is undefined in
the C specification, so if "ns_first_ino" is set to a large value other
than the default value NILFS_USER_INO (=11), the macros may potentially
malfunction depending on the environment.
Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and
by preventing bit shifts equal to or greater than the NILFS_USER_INO
constant in the inode number test macros.
Also, change the type of "ns_first_ino" from signed integer to unsigned
integer to avoid the need for type casting in comparisons such as the
lower bound check introduced this time. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: add missing check for inode numbers on directory entries
Syzbot reported that mounting and unmounting a specific pattern of
corrupted nilfs2 filesystem images causes a use-after-free of metadata
file inodes, which triggers a kernel bug in lru_add_fn().
As Jan Kara pointed out, this is because the link count of a metadata file
gets corrupted to 0, and nilfs_evict_inode(), which is called from iput(),
tries to delete that inode (ifile inode in this case).
The inconsistency occurs because directories containing the inode numbers
of these metadata files that should not be visible in the namespace are
read without checking.
Fix this issue by treating the inode numbers of these internal files as
errors in the sanity check helper when reading directory folios/pages.
Also thanks to Hillf Danton and Matthew Wilcox for their initial mm-layer
analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: topology: Fix references to freed memory
Most users after parsing a topology file, release memory used by it, so
having pointer references directly into topology file contents is wrong.
Use devm_kmemdup(), to allocate memory as needed. |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: Fix use-after-free bug in gb_interface_release due to race condition.
In gb_interface_create, &intf->mode_switch_completion is bound with
gb_interface_mode_switch_work. Then it will be started by
gb_interface_request_mode_switch. Here is the relevant code.
if (!queue_work(system_long_wq, &intf->mode_switch_work)) {
...
}
If we call gb_interface_release to make cleanup, there may be an
unfinished work. This function will call kfree to free the object
"intf". However, if gb_interface_mode_switch_work is scheduled to
run after kfree, it may cause use-after-free error as
gb_interface_mode_switch_work will use the object "intf".
The possible execution flow that may lead to the issue is as follows:
CPU0 CPU1
| gb_interface_create
| gb_interface_request_mode_switch
gb_interface_release |
kfree(intf) (free) |
| gb_interface_mode_switch_work
| mutex_lock(&intf->mutex) (use)
Fix it by canceling the work before kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/hwmon: Get rid of devm
When both hwmon and hwmon drvdata (on which hwmon depends) are device
managed resources, the expectation, on device unbind, is that hwmon will be
released before drvdata. However, in i915 there are two separate code
paths, which both release either drvdata or hwmon and either can be
released before the other. These code paths (for device unbind) are as
follows (see also the bug referenced below):
Call Trace:
release_nodes+0x11/0x70
devres_release_group+0xb2/0x110
component_unbind_all+0x8d/0xa0
component_del+0xa5/0x140
intel_pxp_tee_component_fini+0x29/0x40 [i915]
intel_pxp_fini+0x33/0x80 [i915]
i915_driver_remove+0x4c/0x120 [i915]
i915_pci_remove+0x19/0x30 [i915]
pci_device_remove+0x32/0xa0
device_release_driver_internal+0x19c/0x200
unbind_store+0x9c/0xb0
and
Call Trace:
release_nodes+0x11/0x70
devres_release_all+0x8a/0xc0
device_unbind_cleanup+0x9/0x70
device_release_driver_internal+0x1c1/0x200
unbind_store+0x9c/0xb0
This means that in i915, if use devm, we cannot gurantee that hwmon will
always be released before drvdata. Which means that we have a uaf if hwmon
sysfs is accessed when drvdata has been released but hwmon hasn't.
The only way out of this seems to be do get rid of devm_ and release/free
everything explicitly during device unbind.
v2: Change commit message and other minor code changes
v3: Cleanup from i915_hwmon_register on error (Armin Wolf)
v4: Eliminate potential static analyzer warning (Rodrigo)
Eliminate fetch_and_zero (Jani)
v5: Restore previous logic for ddat_gt->hwmon_dev error return (Andi) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: don't check if plane->state->fb == state->fb
Currently, when using non-blocking commits, we can see the following
kernel warning:
[ 110.908514] ------------[ cut here ]------------
[ 110.908529] refcount_t: underflow; use-after-free.
[ 110.908620] WARNING: CPU: 0 PID: 1866 at lib/refcount.c:87 refcount_dec_not_one+0xb8/0xc0
[ 110.908664] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash aes_arm64 aes_generic algif_skcipher af_alg bnep hid_logitech_hidpp vc4 brcmfmac hci_uart btbcm brcmutil bluetooth snd_soc_hdmi_codec cfg80211 cec drm_display_helper drm_dma_helper drm_kms_helper snd_soc_core snd_compress snd_pcm_dmaengine fb_sys_fops sysimgblt syscopyarea sysfillrect raspberrypi_hwmon ecdh_generic ecc rfkill libaes i2c_bcm2835 binfmt_misc joydev snd_bcm2835(C) bcm2835_codec(C) bcm2835_isp(C) v4l2_mem2mem videobuf2_dma_contig snd_pcm bcm2835_v4l2(C) raspberrypi_gpiomem bcm2835_mmal_vchiq(C) videobuf2_v4l2 snd_timer videobuf2_vmalloc videobuf2_memops videobuf2_common snd videodev vc_sm_cma(C) mc hid_logitech_dj uio_pdrv_genirq uio i2c_dev drm fuse dm_mod drm_panel_orientation_quirks backlight ip_tables x_tables ipv6
[ 110.909086] CPU: 0 PID: 1866 Comm: kodi.bin Tainted: G C 6.1.66-v8+ #32
[ 110.909104] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 110.909114] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 110.909132] pc : refcount_dec_not_one+0xb8/0xc0
[ 110.909152] lr : refcount_dec_not_one+0xb4/0xc0
[ 110.909170] sp : ffffffc00913b9c0
[ 110.909177] x29: ffffffc00913b9c0 x28: 000000556969bbb0 x27: 000000556990df60
[ 110.909205] x26: 0000000000000002 x25: 0000000000000004 x24: ffffff8004448480
[ 110.909230] x23: ffffff800570b500 x22: ffffff802e03a7bc x21: ffffffecfca68c78
[ 110.909257] x20: ffffff8002b42000 x19: ffffff802e03a600 x18: 0000000000000000
[ 110.909283] x17: 0000000000000011 x16: ffffffffffffffff x15: 0000000000000004
[ 110.909308] x14: 0000000000000fff x13: ffffffed577e47e0 x12: 0000000000000003
[ 110.909333] x11: 0000000000000000 x10: 0000000000000027 x9 : c912d0d083728c00
[ 110.909359] x8 : c912d0d083728c00 x7 : 65646e75203a745f x6 : 746e756f63666572
[ 110.909384] x5 : ffffffed579f62ee x4 : ffffffed579eb01e x3 : 0000000000000000
[ 110.909409] x2 : 0000000000000000 x1 : ffffffc00913b750 x0 : 0000000000000001
[ 110.909434] Call trace:
[ 110.909441] refcount_dec_not_one+0xb8/0xc0
[ 110.909461] vc4_bo_dec_usecnt+0x4c/0x1b0 [vc4]
[ 110.909903] vc4_cleanup_fb+0x44/0x50 [vc4]
[ 110.910315] drm_atomic_helper_cleanup_planes+0x88/0xa4 [drm_kms_helper]
[ 110.910669] vc4_atomic_commit_tail+0x390/0x9dc [vc4]
[ 110.911079] commit_tail+0xb0/0x164 [drm_kms_helper]
[ 110.911397] drm_atomic_helper_commit+0x1d0/0x1f0 [drm_kms_helper]
[ 110.911716] drm_atomic_commit+0xb0/0xdc [drm]
[ 110.912569] drm_mode_atomic_ioctl+0x348/0x4b8 [drm]
[ 110.913330] drm_ioctl_kernel+0xec/0x15c [drm]
[ 110.914091] drm_ioctl+0x24c/0x3b0 [drm]
[ 110.914850] __arm64_sys_ioctl+0x9c/0xd4
[ 110.914873] invoke_syscall+0x4c/0x114
[ 110.914897] el0_svc_common+0xd0/0x118
[ 110.914917] do_el0_svc+0x38/0xd0
[ 110.914936] el0_svc+0x30/0x8c
[ 110.914958] el0t_64_sync_handler+0x84/0xf0
[ 110.914979] el0t_64_sync+0x18c/0x190
[ 110.914996] ---[ end trace 0000000000000000 ]---
This happens because, although `prepare_fb` and `cleanup_fb` are
perfectly balanced, we cannot guarantee consistency in the check
plane->state->fb == state->fb. This means that sometimes we can increase
the refcount in `prepare_fb` and don't decrease it in `cleanup_fb`. The
opposite can also be true.
In fact, the struct drm_plane .state shouldn't be accessed directly
but instead, the `drm_atomic_get_new_plane_state()` helper function should
be used. So, we could stick to this check, but using
`drm_atomic_get_new_plane_state()`. But actually, this check is not re
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in cifs_stats_proc_write()
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in cifs_stats_proc_show()
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
When ncm function is working and then stop usb0 interface for link down,
eth_stop() is called. At this piont, accidentally if usb transport error
should happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled.
After that, ncm_disable() is called to disable for ncm unbind
but gether_disconnect() is never called since 'in_ep' is not enabled.
As the result, ncm object is released in ncm unbind
but 'dev->port_usb' associated to 'ncm->port' is not NULL.
And when ncm bind again to recover netdev, ncm object is reallocated
but usb0 interface is already associated to previous released ncm object.
Therefore, once usb0 interface is up and eth_start_xmit() is called,
released ncm object is dereferrenced and it might cause use-after-free memory.
[function unlink via configfs]
usb0: eth_stop dev->port_usb=ffffff9b179c3200
--> error happens in usb_ep_enable().
NCM: ncm_disable: ncm=ffffff9b179c3200
--> no gether_disconnect() since ncm->port.in_ep->enabled is false.
NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200
NCM: ncm_free: ncm free ncm=ffffff9b179c3200 <-- released ncm
[function link via configfs]
NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000
NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000
NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0
usb0: eth_open dev->port_usb=ffffff9b179c3200 <-- previous released ncm
usb0: eth_start dev->port_usb=ffffff9b179c3200 <--
eth_start_xmit()
--> dev->wrap()
Unable to handle kernel paging request at virtual address dead00000000014f
This patch addresses the issue by checking if 'ncm->netdev' is not NULL at
ncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'.
It's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect
rather than check 'ncm->port.in_ep->enabled' since it might not be enabled
but the gether connection might be established. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in cifs_debug_files_proc_show()
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress
If during iscsi_sw_tcp_session_create() iscsi_tcp_r2tpool_alloc() fails,
userspace could be accessing the host's ipaddress attr. If we then free the
session via iscsi_session_teardown() while userspace is still accessing the
session we will hit a use after free bug.
Set the tcp_sw_host->session after we have completed session creation and
can no longer fail. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential deadlock when releasing mids
All release_mid() callers seem to hold a reference of @mid so there is
no need to call kref_put(&mid->refcount, __release_mid) under
@server->mid_lock spinlock. If they don't, then an use-after-free bug
would have occurred anyways.
By getting rid of such spinlock also fixes a potential deadlock as
shown below
CPU 0 CPU 1
------------------------------------------------------------------
cifs_demultiplex_thread() cifs_debug_data_proc_show()
release_mid()
spin_lock(&server->mid_lock);
spin_lock(&cifs_tcp_ses_lock)
spin_lock(&server->mid_lock)
__release_mid()
smb2_find_smb_tcon()
spin_lock(&cifs_tcp_ses_lock) *deadlock* |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free bug in cifs_debug_data_proc_show()
Skip SMB sessions that are being teared down
(e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show()
to avoid use-after-free in @ses.
This fixes the following GPF when reading from /proc/fs/cifs/DebugData
while mounting and umounting
[ 816.251274] general protection fault, probably for non-canonical
address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI
...
[ 816.260138] Call Trace:
[ 816.260329] <TASK>
[ 816.260499] ? die_addr+0x36/0x90
[ 816.260762] ? exc_general_protection+0x1b3/0x410
[ 816.261126] ? asm_exc_general_protection+0x26/0x30
[ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs]
[ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs]
[ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs]
[ 816.262689] ? seq_read_iter+0x379/0x470
[ 816.262995] seq_read_iter+0x118/0x470
[ 816.263291] proc_reg_read_iter+0x53/0x90
[ 816.263596] ? srso_alias_return_thunk+0x5/0x7f
[ 816.263945] vfs_read+0x201/0x350
[ 816.264211] ksys_read+0x75/0x100
[ 816.264472] do_syscall_64+0x3f/0x90
[ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 816.265135] RIP: 0033:0x7fd5e669d381 |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix uaf in jfs_evict_inode
When the execution of diMount(ipimap) fails, the object ipimap that has been
released may be accessed in diFreeSpecial(). Asynchronous ipimap release occurs
when rcu_core() calls jfs_free_node().
Therefore, when diMount(ipimap) fails, sbi->ipimap should not be initialized as
ipimap. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: powermate - fix use-after-free in powermate_config_complete
syzbot has found a use-after-free bug [1] in the powermate driver. This
happens when the device is disconnected, which leads to a memory free from
the powermate_device struct. When an asynchronous control message
completes after the kfree and its callback is invoked, the lock does not
exist anymore and hence the bug.
Use usb_kill_urb() on pm->config to cancel any in-progress requests upon
device disconnection.
[1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e |
| In the Linux kernel, the following vulnerability has been resolved:
HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver Due to Race Condition
In the ssi_protocol_probe() function, &ssi->work is bound with
ssip_xmit_work(), In ssip_pn_setup(), the ssip_pn_xmit() function
within the ssip_pn_ops structure is capable of starting the
work.
If we remove the module which will call ssi_protocol_remove()
to make a cleanup, it will free ssi through kfree(ssi),
while the work mentioned above will be used. The sequence
of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| ssip_xmit_work
ssi_protocol_remove |
kfree(ssi); |
| struct hsi_client *cl = ssi->cl;
| // use ssi
Fix it by ensuring that the work is canceled before proceeding
with the cleanup in ssi_protocol_remove(). |
| A maliciously crafted CATPART, STP, and MODEL file, when parsed in atf_dwg_consumer.dll, rose_x64_vc15.dll and libodxdll through Autodesk applications, can cause a use-after-free vulnerability. This vulnerability, along with other vulnerabilities, can lead to code execution in the current process. |
| A maliciously crafted SLDPRT file in ASMkern228A.dll when parsed through Autodesk applications can be used in user-after-free vulnerability. This vulnerability, along with other vulnerabilities, could lead to code execution in the current process. |
