| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability classified as critical was found in uYanki board-stm32f103rc-berial up to 84daed541609cb7b46854cc6672a275d1007e295. This vulnerability affects the function heartrate1_i2c_hal_write of the file 7.Example/hal/i2c/max30100/Manual/demo2/2/heartrate1_hal.c. The manipulation of the argument num leads to stack-based buffer overflow. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. |
| Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in Western Digital My Cloud ddns-start on Linux allows Overflow Buffers.This issue affects My Cloud: before 5.29.102. |
| A vulnerability was found in PX4 PX4-Autopilot up to 1.15.4. This issue affects the function MavlinkReceiver::handle_message_serial_control of the file src/modules/mavlink/mavlink_receiver.cpp of the component Mavlink Shell Closing Handler. The manipulation of the argument _mavlink_shell leads to use after free. An attack has to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The identifier of the patch is 4395d4f00c49b888f030f5b43e2a779f1fa78708. It is recommended to apply a patch to fix this issue. |
| z2d is a pure Zig 2D graphics library. Versions of z2d after `0.5.1` and up to and including `0.6.0`, when writing from one surface to another using `z2d.compositor.StrideCompositor.run`, and higher-level operations when the anti-aliasing mode is set to `.default` (such as `Context.fill`, `Context.stroke`, `painter.fill`, and `painter.stroke`), the source surface can be completely out-of-bounds on the x-axis, but not on the y-axis, by way of a negative offset. This results in an overflow of the value controlling the length of the stride. In non-safe optimization modes (consumers compiling with `ReleaseFast` or `ReleaseSmall`), this could potentially lead to invalid memory accesses or corruption.
This issue is patched in version `0.6.1`. Users on an untagged version after `v0.5.1` and before `v0.6.1` are advised to update to address the vulnerability. Those still on Zig `0.13.0` are recommended to downgrade to `v0.5.1`. |
| A vulnerability was found in H3C GR-3000AX V100R007L50. It has been classified as critical. Affected is the function UpdateWanParamsMulti/UpdateIpv6Params of the file /routing/goform/aspForm. The manipulation of the argument param leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor confirms the existence of this issue. Because they assess the risk as low, they do not have immediate plans for remediation. |
| A vulnerability has been found in Linksys WRT1900ACS, EA7200, EA7450 and EA7500 up to 20250619 and classified as critical. This vulnerability affects the function SetDefaultConnectionService of the file /upnp/control/Layer3Forwarding of the component IGD. The manipulation of the argument NewDefaultConnectionService leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| z2d is a pure Zig 2D graphics library. z2d v0.7.0 released with a new multi-sample anti-aliasing (MSAA) method, which uses a new buffering mechanism for storing coverage data. This differs from the standard alpha mask surface used for the previous super-sample anti-aliasing (SSAA) method. Under certain circumstances where the path being drawn existed in whole or partly outside of the rendering surface, incorrect bounding could cause out-of-bounds access within the coverage buffer. This affects the higher-level drawing operations, such as Context.fill, Context.stroke, painter.fill, and painter.stroke, when either the .default or .multisample_4x anti-aliasing modes were used. .supersample_4x was not affected, nor was drawing without anti-aliasing. In non-safe optimization modes (consumers compiling with ReleaseFast or ReleaseSmall), this could potentially lead to invalid memory accesses or corruption. z2d v0.7.1 fixes this issue, and it's recommended to upgrade to v0.7.1, or, given the small period of time v0.7.0 has been released, use v0.7.1 immediately, skipping v0.7.0. |
| Description
In Spring Framework, versions 6.0.x as of 6.0.5, versions 6.1.x and 6.2.x, an application is vulnerable to a reflected file download (RFD) attack when it sets a “Content-Disposition” header with a non-ASCII charset, where the filename attribute is derived from user-supplied input.
Specifically, an application is vulnerable when all the following are true:
* The header is prepared with org.springframework.http.ContentDisposition.
* The filename is set via ContentDisposition.Builder#filename(String, Charset).
* The value for the filename is derived from user-supplied input.
* The application does not sanitize the user-supplied input.
* The downloaded content of the response is injected with malicious commands by the attacker (see RFD paper reference for details).
An application is not vulnerable if any of the following is true:
* The application does not set a “Content-Disposition” response header.
* The header is not prepared with org.springframework.http.ContentDisposition.
* The filename is set via one of: * ContentDisposition.Builder#filename(String), or
* ContentDisposition.Builder#filename(String, ASCII)
* The filename is not derived from user-supplied input.
* The filename is derived from user-supplied input but sanitized by the application.
* The attacker cannot inject malicious content in the downloaded content of the response.
Affected Spring Products and VersionsSpring Framework:
* 6.2.0 - 6.2.7
* 6.1.0 - 6.1.20
* 6.0.5 - 6.0.28
* Older, unsupported versions are not affected
MitigationUsers of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability6.2.x6.2.8OSS6.1.x6.1.21OSS6.0.x6.0.29 Commercial https://enterprise.spring.io/ No further mitigation steps are necessary.
CWE-113 in `Content-Disposition` handling in VMware Spring Framework versions 6.0.5 to 6.2.7 allows remote attackers to launch Reflected File Download (RFD) attacks via unsanitized user input in `ContentDisposition.Builder#filename(String, Charset)` with non-ASCII charsets. |
| A vulnerability was found in H3C GR-5400AX V100R009L50 and classified as critical. This issue affects the function UpdateWanparamsMulti/UpdateIpv6params of the file /routing/goform/aspForm. The manipulation of the argument param leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor confirms the existence of this issue. Because they assess the risk as low, they do not have immediate plans for remediation. |
| On the exos 9300 server, a SOAP API is reachable on port 8002. This API does not require any authentication prior to sending requests. Therefore, network access to the exos server allows e.g. the creation of arbitrary access log events as well as querying the 2FA PINs associated with the enrolled chip cards. |
| A vulnerability in the BluStar component of Mitel InAttend 2.6 SP4 through 2.7 and CMG 8.5 SP4 through 8.6 could allow access to sensitive information, changes to the system configuration, or execution of arbitrary commands within the context of the system. |
| Improper buffer restrictions in some Intel(R) System Security Report and System Resources Defense firmware may allow a privileged user to potentially enable escalation of privilege via local access. |
| A stack-based buffer overflow vulnerability exists in Easy File Sharing HTTP Server version 7.2. The flaw is triggered when a crafted POST request is sent to the /sendemail.ghp endpoint containing an overly long Email parameter. The application fails to properly validate the length of this field, resulting in a memory corruption condition. An unauthenticated remote attacker can exploit this to execute arbitrary code with the privileges of the server process. |
| Debug code left active in AMD's Video Decoder Engine Firmware (VCN FW) could allow a attacker to submit a maliciously crafted command causing the VCN FW to perform read/writes HW registers, potentially impacting confidentiality, integrity and availabilability of the system. |
| A vulnerability classified as problematic has been found in osrg GoBGP up to 3.37.0. Affected is the function SplitRTR of the file pkg/packet/rtr/rtr.go. The manipulation leads to out-of-bounds read. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The name of the patch is e748f43496d74946d14fed85c776452e47b99d64. It is recommended to apply a patch to fix this issue. |
| A vulnerability was identified in H3C Magic B3 up to 100R002. This affects the function AddMacList/EditMacList of the file /goform/aspForm. The manipulation of the argument param leads to buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| HTTP.jl is an HTTP client and server functionality for the Julia programming language. Prior to version 1.10.19, HTTP.jl did not validate header names/values for illegal characters, allowing CRLF-based header injection and response splitting. This enables HTTP response splitting and header injection, leading to cache poisoning, XSS, session fixation, and more. This issue is fixed in HTTP.jl `v1.10.19`. |
| FreyrSCADA/IEC-60870-5-104 server v21.06.008 allows remote attackers to cause a denial of service by sending specific message sequences. |
| A vulnerability classified as critical was found in symisc UnQLite up to 957c377cb691a4f617db9aba5cc46d90425071e2. This vulnerability affects the function jx9MemObjStore of the file /data/src/benchmarks/unqlite/unqlite.c. The manipulation leads to heap-based buffer overflow. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. |
| Use of unmaintained third party components for some Intel(R) Processor Identification Utility before version 8.0.43 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with an authenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
