| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Linksys SPA-2102 Phone Adapter 3.3.6 allows remote attackers to cause a denial of service (crash) via a long ping packet ("ping of death"). NOTE: the severity of this issue has been disputed since there are limited attack scenarios. |
| The Linksys WRT54G router stores passwords and keys in cleartext in the Config.bin file, which might allow remote authenticated users to obtain sensitive information via an HTTP request for the top-level Config.bin URI. |
| The Linksys WAG200G with firmware 1.01.01, WRT54GC 2 with firmware 1.00.7, and WRT54GC 1 with firmware 1.03.0 and earlier allow remote attackers to obtain sensitive information (passwords and configuration data) via a packet to UDP port 916. NOTE: some of these details are obtained from third party information. |
| Multiple buffer overflows in the Marvell wireless driver, as used in Linksys WAP4400N Wi-Fi access point with firmware 1.2.17 on the Marvell 88W8361P-BEM1 chipset, and other products, allow remote 802.11-authenticated users to cause a denial of service (wireless access point crash) and possibly execute arbitrary code via an association request with long (1) rates, (2) extended rates, and unspecified other information elements. |
| The Marvell driver for the Linksys WAP4400N Wi-Fi access point with firmware 1.2.14 on the Marvell 88W8361P-BEM1 chipset, when WEP mode is enabled, does not properly parse malformed 802.11 frames, which allows remote attackers to cause a denial of service (reboot or hang-up) via a malformed association request containing the WEP flag, as demonstrated by a request that is too short, a different vulnerability than CVE-2008-1144 and CVE-2008-1197. |
| PhoneCtrl.exe in Linksys WIP 330 Wireless-G IP Phone 1.00.06A allows remote attackers to cause a denial of service (crash) via a TCP SYN scan, as demonstrated using TCP ports 1-65535 with nmap. |
| Cross-site request forgery (CSRF) vulnerability in apply.cgi in the Linksys WRT54GL Wireless-G Broadband Router with firmware 4.30.9 allows remote attackers to perform actions as administrators. |
| Due to missing neutralization of special elements, OS commands can be injected via the handshake of a TLS-SRP connection, which are ultimately run as the root user.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Due to an improperly configured firewall rule, the router will accept any connection on the WAN port with the source port 5222, exposing all services which are normally only accessible through the local network.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Linksys MR9600, Linksys MX4200 allows that contents of a USB drive partition can be mounted in an arbitrary location of the file system. This may result in the execution of shell scripts in the context of a root user.This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Due to missing authentication, a user with physical access to the device can misuse the mesh functionality for adding a new mesh device to the network
to gain access to sensitive information, including the password for admin access to the web interface and the Wi-Fi passwords.This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Due to improper neutralization of special elements, SQL statements can be injected via the handshake of a TLS-SRP connection. This can be used to inject known credentials into the database that can be utilized to successfully complete the handshake and use the protected service.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Due to missing neutralization of special elements, OS commands can be injected via the update functionality of a TLS-SRP connection, which is normally used for configuring devices inside the mesh network.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| The Web interface in Linksys WRT54G 2.02.7 and BEFSR41 version 3, with the firewall disabled, allows remote attackers to attempt to login to an administration web page, even when the configuration specifies that remote administration is disabled. |
| Linksys WRT54G 3.01.03, 3.03.6, 4.00.7, and possibly other versions before 4.20.7, does not verify user authentication until after an HTTP POST request has been processed, which allows remote attackers to (1) modify configuration using restore.cgi or (2) upload new firmware using upgrade.cgi. |
| Atmel Firmware 1.3 Wireless Access Point (WAP) allows remote attackers to cause a denial of service via a SNMP request with (1) a community string other than "public" or (2) an unknown OID, which causes the WAP to deny subsequent SNMP requests. |
| Linksys EtherFast Cable/DSL BEFSR11, BEFSR41 and BEFSRU31 with the firmware 1.42.7 upgrade installed opens TCP port 5678 for remote administration even when the "Block WAN" and "Remote Admin" options are disabled, which allows remote attackers to gain access. |
| Unknown vulnerability in Linksys WRT54GS wireless router with firmware 4.50.6, with WPA Personal/TKIP authentication enabled, allows remote clients to bypass authentication by connecting without using encryption. |
| DHCP on Linksys BEFSR11, BEFSR41, BEFSR81, and BEFSRU31 Cable/DSL Routers, firmware version 1.45.7, does not properly clear previously used buffer contents in a BOOTP reply packet, which allows remote attackers to obtain sensitive information. |
| Linksys WRT54G routers version 5 (running VXWorks) allow remote attackers to cause a denial of service by sending a malformed DCC SEND string to an IRC channel, which causes an IRC connection reset, possibly related to the masquerading code for NAT environments, and as demonstrated via (1) a DCC SEND with a single long argument, or (2) a DCC SEND with IP, port, and filesize arguments with a 0 value. |
