| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ImageSharp is a 2D graphics library. From 2.1.0 until 4.1.2, the TIFF CCITT Group 4 encoder allocates Width times rowsPerStrip bytes even though T6BitCompressor.CompressStrip can emit encoded row data and two 12-bit end-of-facsimile-block codes beyond that capacity. TiffCcittCompressor.WriteCode performs unchecked writes, and a decode-and-re-encode flow can inherit TiffCompression.CcittGroup4Fax and one-bit metadata from attacker-supplied input. The resulting out-of-bounds writes can corrupt memory and terminate the process. This issue is fixed in version 4.1.2. |
| Godot Engine through 4.7.2 has a heap out-of-bounds write in the Radiance HDR (.hdr) image decoder (modules/hdr/image_loader_hdr.cpp). The run-length decoding loop expands RLE instructions read from the file into a buffer sized from the image dimensions, without validating that an instruction's repeat/copy count fits the remaining capacity of the row buffer. A crafted .hdr file therefore writes attacker-supplied bytes past the end of the heap allocation, with the overflow length and content controlled by the file. The defect is reached automatically when the product imports a crafted .hdr (e.g., when opening a project containing one), and at runtime in exported projects that load untrusted .hdr images. NOTE: the Supplier's position is that the research has identified "no security issues" because the required attacker access is outside of the current Godot Engine threat model. |
| The Nuvoton NPCX eSPI driver parses Target-Attached-Flash (TAF) requests in espi_taf_parse() (drivers/espi/espi_npcx.c), taking the 12-bit length field directly out of the request header in the FLASHRXBUF FIFO. For write and RPMC OP1 requests it copied DIV_ROUND_UP(len, 4) words into struct espi_taf_pckt.src, a fixed 16-word (64-byte) member of a static structure, without ever comparing the length against that buffer or against the negotiated eSPI receive payload size (rx-plsize, 64 bytes on all in-tree NPCX/NPCK SoCs). Both the loop counter and the word count were uint8_t, so the copy ran up to 255 iterations.
An eSPI controller that emits a flash request whose header claims a payload larger than the negotiated maximum therefore drives up to 239 32-bit stores past the end of the structure — roughly 956 bytes of out-of-bounds write into .bss — from the eSPI flash receive interrupt handler, while the source reads walk past the end of the 18-word FLASHRXBUF register array into neighbouring eSPI registers. The same unvalidated length was then passed on to flash_write() in espi_taf_npcx_flash_write() with the 64-byte src buffer as source, reading up to 4 KB of adjacent controller SRAM into SPI flash at a host-chosen address, where the host can read it back. A related fixed-size stack buffer in taf_npcx_completion_handler() was overflowed by four bytes on the maximum-size completion path on SoCs whose tx-plsize is 64.
The defect is reachable only from the eSPI host side, and only by a request that violates the negotiated payload size, so it requires host firmware or bus-level control rather than ordinary host software; a compliant maximum-length write fits the buffer exactly and is handled correctly. Because TAF exists specifically so that the embedded controller arbitrates host access to shared flash (espi_taf_check_read_protect() / espi_taf_check_write_protect()), corrupting controller memory from a host-supplied field crosses the trust boundary the feature asserts; consequences range from controller crash or hang to corruption of driver state that gates the flash protection regions.
The fix widens the counters, rejects any request whose word count exceeds both ARRAY_SIZE(FLASHRXBUF) - NPCX_ESPI_FLASH_HEADER_ADDRESS_LEN and NPCX_TAF_RX_PAYLOAD_WORDS (derived from the devicetree rx-plsize), marks such packets with a new invalid_flag so espi_taf_work() answers them with an unsuccessful completion instead of processing them, bounds the transmit payload against FLASHTXBUF, and adds a default case for unsupported cycle types. Only configurations with CONFIG_ESPI_TAF enabled on an NPCX/NPCK target are affected; no in-tree board enables it by default. |
| Vulnerability in the Oracle HTTP Server product of Oracle Fusion Middleware (component: OSSL Module). The supported version that is affected is 12.2.1.4.0. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle HTTP Server executes to compromise Oracle HTTP Server. Successful attacks of this vulnerability can result in takeover of Oracle HTTP Server. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: 2D). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition as well as unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data and unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 7.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H). |
| snap7 through 1.4.3 contains an out-of-bounds write vulnerability in TSnap7MicroClient::opReadArea() that allows malicious S7 peers to overflow client buffers via an unchecked DataLength field. Rogue or impersonated PLCs can return crafted ReadVar responses causing memcpy of up to 65535 bytes into caller buffers, crashing SCADA, HMI, or gateway processes and corrupting memory. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: midi2: Fix the jack descriptor array sizes
The jack in/out descriptor arrays in struct f_midi2_usb_config have
the size of MAX_CABLES, which look reasonable -- but it turned out to
be incorrect. Namely, the entries for those arrays are added from
both inputs and outputs, hence for each loop cycle, it adds two, ended
up with as twice as the expected size. This inconsistency may result
in potential OOB when a large number of jacks are set up via configfs,
although the max number of cables (the loop count) is limited to
MAX_CABLES.
For addressing it, correct the jack_ins & jack_outs array sizes to
twice, MAX_CABLES * 2. |
| Out-of-bounds write in Windows Fast FAT Driver allows an authorized attacker to elevate privileges locally. |
| Snap7 through 1.4.3 contains an out-of-bounds write vulnerability in the passive partner that allows a malicious active partner to overflow application buffers by declaring an unvalidated BSend total length. Attackers connecting from the configured peer address can declare up to 65535 bytes and send a short fragment, causing BRecv to memcpy past the buffer and crash or corrupt SCADA, HMI or gateway processes. |
| Vyper from 0.2.13 before 0.2.15 allocates storage slots for @nonreentrant reentrancy locks at the same locations as contract storage variables. When a function using @nonreentrant is called, setting the lock overwrites the overlapping storage variable, corrupting contract state and breaking the contract's intended logic. |
| An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an eBGP peer which has not negotiated four-octet-AS capability sending a specifically malformed BGP update to cause a Denial-of-Service (DoS). |
| The SOAP HTTP client guards its response buffer growth with a check that relies on signed integer overflow, which is undefined behaviour and is not guaranteed to trigger. When the check is optimised away, a malicious SOAP server can make the client allocate a buffer far smaller than the data it then writes into it, producing a heap buffer overflow. |
| A flaw was found in spice-server. Multiple migration data handlers use client-supplied offsets from SPICE_MSGC_MIGRATE_DATA messages without bounds validation, allowing a malicious authenticated SPICE client during VM live migration to read arbitrary heap memory or trigger heap corruption via out-of-bounds read and write operations on the message buffer. |
| MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, ST_AsText can write beyond an allocated output buffer when converting deeply nested GeometryCollections because recursive WKT serialization does not account for bytes consumed or reserve sufficient space. A low-privileged remote attacker can submit a specially crafted GIS object to corrupt memory and potentially achieve code execution when combined with another vulnerability. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix BPF_F_CPU validation for sparse CPU IDs
BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map
operation flags. bpf_map_check_op_flags() currently compares that ID
with num_possible_cpus(), which is the number of possible CPUs rather
than a bound on CPU IDs.
On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU
mask was 0,2-3. A userspace program using raw bpf() syscalls creates
a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations
for each CPU by setting BPF_F_CPU and the CPU ID in the flags.
With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is
rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map
access path and triggers:
Unable to handle kernel paging request at virtual address ...
pc : __pi_memcpy_generic+0x5c/0x22c
lr : bpf_percpu_array_update+0x2dc/0x2e8
Call trace:
__pi_memcpy_generic
bpf_map_update_value
map_update_elem
__sys_bpf
Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This
rejects CPU IDs outside the valid range and CPUs absent from the
possible mask, while allowing valid sparse CPU IDs. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: block: Fix zones_cond out-of-bounds write on zone report
blk_revalidate_disk_zones() sizes the zones_cond array from the disk
capacity and zone size, but the index used by blk_revalidate_zone_cond()
comes from the device-driven report_zones() walk and is never checked
against the array size. A device reporting more zones than fit the array
makes blk_zone_set_cond() write out of bounds.
One way to reach this is a zone count exceeding 32 bits: both
blk_revalidate_zone_args.nr_zones and struct zoned_disk_info.nr_zones are
unsigned int, so a disk advertising more than UINT_MAX zones (e.g. 2^32 +
1024 zones of one 512-byte logical block) gets its zone count truncated to
a small value, undersizing the array while the report walk keeps counting
upward.
Check the index against the array size before storing the zone condition,
and refuse to revalidate when the zone count does not fit 32 bits. |
| An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent attacker which sends a specific set of BGP communities to cause a Denial-of-Service (DoS) as rpd crashes when graceful-shutdown sender community is added when attempting to advertise. |
| A flaw was found in the DPDK GSO library. When software GSO copies packet headers into a new mbuf, it does not check that the header fits in the source first segment or in the destination buffer, and a header longer than the configured GSO segment size can underflow the payload-size calculation. A remote or guest-supplied packet processed with software GSO can trigger an out-of-bounds read or write. |
| A vulnerability exists in NGINX Plus and NGINX Open Source when a location is configured that uses the alias directive together with rewrite and a set or return directive referencing the $request_filename variable. Alternatively, the same result could be achieved when the $request_filename variable is used in an access log format directive. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Out-of-bounds write vulnerability in Citrix Workspace app for Windows.
This issue affects Workspace app for Windows: before 2603.20 CR, before LTSR 2607 Hotfix 1, and before LTSR 2507 CU3 Hotfix 1. |
