Search

Search Results (430572 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-124328 1 Flowci 1 Flow-core-x 2026-11-20 7.4 High
A vulnerability has been found in FlowCI flow-core-x up to 1.23.49. The affected element is the function ConditionManagerImpl.run of the file core/src/main/java/com/flowci/core/common/manager/ConditionManagerImpl.java of the component Groovy Script Evaluation. The manipulation of the argument condition leads to code injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2026-99583 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: sctp: hold shkey across socket migration sctp_sock_migrate() transfers queued DATA skbs from the old socket to the new one. skb_orphan() invokes sctp_wfree() during that transfer and drops the skb-owned shared-key reference. If userspace has removed that key from the association, this can be the final reference. The following sctp_set_owner_w() then dereferences the freed chunk->shkey while trying to take the new owner reference. Take a temporary shared-key reference before orphaning the skb and release it after the new owner has taken its reference. This preserves the selected authentication key throughout the ownership transfer. Bug found and triaged by OpenAI Security Research and validated by Trail of Bits.
CVE-2026-99584 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid folio->mapping dereference in is_{meta, node}_folio() Otherwise, it may cause NULL pointer dereference in race condition: Thread A Thread B - f2fs_setattr - f2fs_truncate - f2fs_truncate_blocks - f2fs_do_truncate_blocks - f2fs_truncate_inode_blocks - truncate_dnode - truncate_node - invalidate_mapping_pages - folio->mapping = NULL - folio_lock - is_node_folio - F2FS_F_SB(folio): dereference on folio->mapping
CVE-2026-99585 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Use kvm_s2_fault_vma_info in gmem_abort() gmem_abort() maps at s2fd->fault_ipa, which HPFAR_EL2 holds at 4K granularity whatever the page size. The generic page-table code aligns it, but pkvm_pgtable_stage2_map() looks up existing mappings over [addr, addr + size), so on a pKVM host with pages larger than 4K a guest_memfd-backed guest that faults past the first 4K of a page can find its neighbour's mapping, get -EAGAIN and take the same fault forever. The memory fault exit reports s2fd->fault_ipa too, which for a nested guest's fault is the nested IPA rather than the canonical one kvm_gmem_get_pfn() failed on. Take the addresses from kvm_s2_fault_vma_info instead, as user_mem_abort() does, and report the canonical gfn in the memory fault exit. kvm_s2_fault_get_vma_info() itself isn't called: a guest_memfd memslot's userspace_addr doesn't need to be backed by a VMA.
CVE-2026-99587 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: reject data-in commands with a data-out buffer SG_IO can submit a data-in SCSI command with DMA_TO_DEVICE. The scatterlist can then contain pages pinned without write access. ata_scsi_rbuf_fill() writes simulated replies to that scatterlist; in the reported case, the copy tried to write the shared zero page and faulted in the kernel. The same mismatch can affect SG_IO commands translated by libata. ZBC IN and GET PHYSICAL ELEMENT STATUS completion handlers can modify the receive buffer even if the drive aborts the command. For ATAPI, the successful INQUIRY completion also rewrites the buffer in atapi_fixup_inquiry(). Reject these mismatched commands before the buffer is written or the command is issued. Report ABORTED COMMAND / DATA IN BUFFER ERROR because the CDB itself can be valid; the supplied transfer direction is wrong.
CVE-2026-99588 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.3 Medium
In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: only update flags for TT events In the first implementation of the translation table events, it was only possible to announce: * ADD: new locally detected client * DEL: disappeared local client If an ADD event was queued and then a DEL event was queued in the same timeslot, it is valid to destroy both events because nothing actually changed for remode nodes But with commit 3c4f7ab60cc2 ("batman-adv: improve the TT component to support runtime flag changes") and subsequent changes, it could also happen that there are extra ADD events: * ADD: _NEW_ locally detected client * ADD: already existing client with new flags * DEL: disappeared local client The first and the last type of event could in theory still be removed together from the (to be announced) events queue. But if the "update flags" ADD is dropped together with the DEL, it would still leave global translation table of a remote node in the incorrect state - believing that the client didn't disappear. If a detected client was previously announced, a DEL event must only overwrite the "update flags" ADD but the DEL itself must still continue to exist in the (to be anounced) events queue. For now, adjustment of the announced flags is used for everything instead of dropping already queued up events completely. Similarly, a DEL followed by an ADD caused both entries to be deleted. But the new ADD could announce flags changes which were not yet present for the client before it was marked for DELetion. The new ADD must therefore only overwrite the DEL - but still be kept.
CVE-2026-99592 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix global ASID handed out to two processes On AMD CPUs with INVLPGB, two live processes can get the same MAX_ASID_AVAILABLE global ASID value. The two then hit each other's TLB entries, so each can read or corrupt the other's memory. The global ASID space is managed lazily. When a global ASID is freed, its bit is set in the global_asid_freed bitmap. Once the free ASID search reaches the end of the global_asid_used bitmap, a global flush is done to really reclaim the lazily freed global ASIDs. However, the current code can assign the same global ASID to two different processes, if one process is assigned MAX_ASID_AVAILABLE - 1, another process MAX_ASID_AVAILABLE, and both stick around (keeping their global ASID numbers in use) until the search wraps around again. At that point a third process could also get assigned MAX_ASID_AVAILABLE. the highest ASID stays in use, so it is not handed out again last_global_asid stays below it, so no reset the clear bits run out find_next_zero_bit() returns MAX_ASID_AVAILABLE global_asid_available > 0, so the failure is not caught MAX_ASID_AVAILABLE is handed out as an ASID A search only looks at the bits below MAX_ASID_AVAILABLE, so it cannot see that this value is in use. The next failed search hands it out again, even if the first process still holds it. The fix used here is to reset the global ASID space after a failed search, and to search again. If that search fails too, no global ASID is handed out. The test for !global_asid_available is removed, because use_global_asid() only calls allocate_global_asid() if global_asid_available > 0. The remaining test is for a condition that should be impossible. [ riel: simplify code, massage changelog and comment ]
CVE-2026-99593 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: arm64: sdei: Preserve the interrupted context's exception registers An SDEI event is dispatched by firmware regardless of PSTATE.DAIF, so it can interrupt the kernel where the exception registers are live: - exception entry, before kernel_entry has saved ELR_EL1/SPSR_EL1 and before the C handler has read ESR_EL1/FAR_EL1; - exception return, after kernel_exit has loaded ELR_EL1/SPSR_EL1 and before the ERET. An IRQ or pseudo-NMI cannot arrive there with PSTATE.I set. Firmware saves only x0-x17, PC and PSTATE around an SDEI event, so a synchronous exception taken by the handler overwrites the interrupted context's ELR, SPSR, ESR and FAR. do_sdei_event() only notices that ELR changed, and warns. The interrupted context then carries on with the handler's state. A task interrupted on its way into the kernel can be sent SIGILL for the handler's kernel data abort. A task interrupted on its way back to user space ERETs to EL1, at the handler's fixup address, with user registers loaded. With SDEI delivering NMI backtraces, this happens in normal operation. The handler runs show_regs(), which reads through possibly-NULL pointers with the _nofault() accessors. print_worker_info() faults this way for a kworker that is not running a work item, and a single sysrq-l warned once per such kworker. Save ELR, SPSR, ESR and FAR in __sdei_handler() before irqentry_nmi_enter(), which can take an exception too, and restore them after irqentry_nmi_exit(). Once they are restored, a nested exception is harmless if its handler is safe in NMI context. That holds for EL1 data aborts on translation, permission and access-flag faults, which never take the mmap lock in NMI context, and for BRK. Warn once, with the syndrome, about any other exception class.
CVE-2026-99596 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: nvme: wait for SRCU readers before splicing the namespace list Readers walk ctrl->namespaces under ctrl->srcu, and some of them sleep there, e.g. nvme_wait_freeze() waiting for I/O to drain. nvme_remove_namespaces() moves the list onto its on-stack ns_list with list_splice_init_rcu(), which only waits for RCU readers before relinking the entries. A reader still on the last namespace then follows its next pointer to ns_list instead of ctrl->namespaces and treats the stack as a namespace. Deleting a controller while a Format NVM passthrough waits for a delayed read on the last namespace gives: BUG: KASAN: stack-out-of-bounds in nvme_wait_freeze+0x102/0x120 Read of size 8 at addr ff110001d2f3fc38 by task nvme/4413 Call Trace: nvme_wait_freeze nvme_passthru_start nvme_submit_user_cmd nvme_user_cmd nvme_dev_ioctl BUG: unable to handle page fault for address: ffffffff8af04850 Use list_splice_init_srcu() instead, which waits for the SRCU readers. This also takes the RCU grace period out of every controller deletion. Deleting 64 tcp controllers with one namespace each, median of 3 runs on each of two boots per kernel: before after nvme disconnect-all (ms) 3491 / 3509 2996 / 3165 nvme_remove_namespaces() avg (ms) 39.0 / 40.5 31.9 / 34.7
CVE-2026-99597 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: srcu: Add list_splice_init_srcu() list_splice_init_rcu() makes a list look empty to new readers, waits for the current ones with the given sync function, and only then links the entries into the new list. The sync function takes no argument, so it can wait for RCU readers but not for the readers of an srcu_struct. Passing synchronize_rcu() for a list read under SRCU still builds, but leaves SRCU readers on the entries while the last one's next pointer is moved onto the new list head. nvme_remove_namespaces() does this today. Add list_splice_init_srcu(), which waits for the readers of the given srcu_struct instead.
CVE-2026-99598 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: MIPS: sgi-ip32: Leave MACE PCI control alone in config accesses mace_pci_read_config() clears the master abort interrupt enable in the MACE PCI control register around each config read. A register read followed by two register writes can hang CRIME 1.1 under DMA load. Ack master aborts in the error register instead, and follow every write with a read so back-to-back accesses cannot form that sequence.
CVE-2026-99599 1 Linux 2 Linux, Linux Kernel 2026-11-20 3.6 Low
In the Linux kernel, the following vulnerability has been resolved: udf: don't use eloc after the end of the unallocated space table When udf_next_aext() returns 0, its eloc, elen and etype outputs hold no defined value. Two walks of the unallocated space table still use eloc after the walk has reached the end of the table. udf_table_prealloc_blocks() looks for a free extent starting at first_block and decides whether it found one by comparing eloc with first_block after the walk. If the table's list ends in a continuation descriptor that leads to an empty allocation extent, eloc is then the block of that allocation extent, which is in use, and if that is first_block, the block is handed out as preallocation. Once udf_discard_prealloc() no longer frees the wrong block, this is what still makes fsx in generic/091 and generic/263 read back bad data on a table, in about one run in four. Only take the extent if the walk stopped at it. When udf_table_free_blocks() cannot merge the freed blocks into an existing extent, it appends a new one and sets only its block number, so the partition reference comes from whatever eloc held after the walk, and with long allocation descriptors it is written to disk. For a table without extents, eloc was never set. Take the partition reference from the freed blocks instead. Short allocation descriptors do not store the partition reference, which is why this half remains a latent long-descriptor fix rather than a reproduced failure.
CVE-2026-99600 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: udf: fix preallocation discarding before an empty allocation extent udf_discard_prealloc() finds the last extent of a file by peeking at the next one with udf_next_aext() and stopping when that returns 0. The peek reads into eloc and elen, and the code then uses them as the last extent. But when udf_next_aext() returns 0 they hold no defined value: if the extent list ends in a continuation descriptor that leads to an empty allocation extent, they describe that continuation, i.e. the block of the empty allocation extent, one block long. The kernel creates such lists itself: when udf_delete_aext() removes the only descriptor of the last allocation extent in a list, it leaves that allocation extent empty and the continuation to it in place. If the last extent is a preallocation, udf_discard_prealloc() deletes it with udf_delete_aext(), which finds the following allocation extent empty, so it also removes the continuation and frees that allocation extent's block. udf_discard_prealloc() then frees eloc and elen: that block a second time, instead of the preallocated blocks. On a space bitmap the preallocated blocks leak and the free block count drifts. On an unallocated space table the second free adds a second free extent for the same block, which is later handed out twice: fsx as run by generic/091 and generic/263 ends up with two parts of its test file in one block and reads back bad data. Peek into separate variables, so that eloc and elen keep the last extent that udf_next_aext() returned with 1.
CVE-2026-99605 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/etnaviv: Fix NULL dereference on unbind without PPU flop reset flop_reset_data_ppu is only allocated on GPUs that need the PPU flop reset. However, etnaviv_unbind(..) frees it unconditionally, and etnaviv_cmdbuf_free(..) dereferences cmdbuf->suballoc before checking whether cmdbuf is NULL. As a result, unloading the driver on GPUs that do not need the PPU flop reset causes a NULL pointer dereference at address 0.
CVE-2026-99607 1 Linux 2 Linux, Linux Kernel 2026-11-20 2.5 Low
In the Linux kernel, the following vulnerability has been resolved: ext2: preserve IOMAP_F_DIRTY for extending direct writes ext2_iomap_begin() sets IOMAP_F_DIRTY for writes that may extend i_size, but clears the flag after ext2_get_blocks(). When the write uses an existing mapped block, iomap can then use FUA and skip generic_write_sync(), even though ext2_dio_write_end_io() updates the inode size. An O_DSYNC write can therefore return without persisting the new size. For example, on a FUA-capable device, a 512-byte O_DIRECT|O_DSYNC write at offset 512 into a fsynced one-byte file returns successfully and extends the in-memory size to 1024, while an immediate read of the on-disk inode still shows size 1. An explicit fsync persists the new size. Move setting of IOMAP_F_DIRTY after the initialization.
CVE-2026-99612 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/tas2781: Only accept CRC-less V1 data if all entries are valid Commit 408249089c48 ("ALSA: hda/tas2781: Accept V1 calibration data without CRC") only checked the first device entry. On machines where the BIOS populates fewer entries than p->ndev, the remaining all-zero entries are applied and tas2781_cali_preproc() divides by zero on playback open. Accept CRC-less V1 data only if every expected entry is non-zero and self-consistent (R0 * 1/R0 close to 1.0), otherwise reject it as before.
CVE-2026-99613 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: cs46xx: Handle SCB creation failures before dereferencing With CONFIG_PM_SLEEP enabled, cs46xx_dsp_create_scb() can return NULL if kmemdup() fails to allocate the SCB data saved for resume. cs46xx_dsp_scb_and_task_init() and _dsp_create_generic_scb() dereference the returned pointer without checking it, causing a NULL pointer dereference on allocation failure. Check both return values before accessing the SCB descriptors. Return -ENOMEM when creating the null SCB fails and propagate NULL from _dsp_create_generic_scb(). Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.
CVE-2026-99614 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/nvkm: clear use.enabled when subdev init fails On Kepler boards without the video decode falcon firmware installed (msvld/mspdec/msppp), every other VA-API decode attempt binds to an engine with no ucode loaded. The submitted work never completes, which leads to a context switch timeout, a channel recovery that cannot reset the engine, and eviction waits on fences that never signal. The process ends up stuck in D state, or killed by SIGBUS when it touches a buffer evicted after the wait times out: msvld: unable to load firmware data msvld: init failed, -19 fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] vo[5444]: channel 14 killed! WARNING: drivers/gpu/drm/nouveau/nvkm/engine/fifo/runl.c:117 at nvkm_runl_rc+0x2a4/0x3b0 [nouveau] [TTM] Buffer eviction failed WARNING: drivers/gpu/drm/nouveau/nouveau_bo.c:1092 at nouveau_bo_move_ntfy.part.0+0x9b/0x100 [nouveau] Tracing nvkm_subdev_ref() and nvkm_subdev_init_() shows the pattern: a reference taken with enabled=0 runs nvkm_falcon_init(), which returns -ENODEV; the next reference sees enabled=1 and succeeds without running it. Clear use.enabled when init() fails, so that every later reference retries init and fails cleanly. The other readers of use.enabled are fini() handlers that use it to skip teardown, which they now also do after a failed init(). On a GK107 (Quadro K1100M) without video firmware, playing H.264 with mpv --hwdec=auto: without this patch the GPU channel is killed within a minute and mpv hangs; with it, VA-API decoder creation fails, mpv falls back to software decoding, and no faults are logged.
CVE-2026-99617 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: arm64: mm: validate /dev/mem mmap ranges without overflow An arm64 syzkaller reproducer creates a FUSE character device with major:minor 1:1, so opening it uses the /dev/mem file operations. It maps one page from offset 0xfffffffffffff000 at user address zero. The next openat() with a NULL pathname triggers a synchronous external abort (SEA, ESR 0x96000010) in strncpy_from_user() via do_getname(), panicking the kernel. valid_mmap_phys_addr_range() checks the exclusive end by adding the mapping size to the starting address. For this offset, the sum wraps to zero and passes the PHYS_MASK test, allowing an out-of-range PFN to reach remap_pfn_range(). The inclusive-end overflow check in mmap_mem_prepare() does not catch it because the end is ULONG_MAX. Reject starting PFNs outside PHYS_MASK and compare the inclusive length against the remaining physical range without overflowing. This also allows mappings that end exactly at PHYS_MASK, which the old check incorrectly rejects. [catalin.marinas@arm.com: changed the check to look more like __access_ok()]
CVE-2026-99619 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: don't drop the gang dependency fence twice drm_sched_job_add_dependency() drops the fence reference when it fails, but amdgpu_cs_submit() drops it again, so the scheduled fence of a gang member loses a reference it still needs. A GFX+COMPUTE gang waiting for another context, with the xarray node allocation for the leader's dependency failed through failslab: WARNING: drivers/dma-buf/dma-fence.c:589 at dma_fence_release+0x34d/0x730, CPU#1: amd_uapi_regres/2993 drm_sched_job_cleanup+0x2c2/0x340 [gpu_sched] amdgpu_job_free+0xcb/0x3e0 [amdgpu] amdgpu_cs_parser_fini+0x435/0x710 [amdgpu] amdgpu_cs_ioctl+0xcd2/0x7a60 [amdgpu] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:dma_fence_signal_timestamp_locked+0x1b8/0x610 (cherry picked from commit 5aa070a83c8378810b906cc8bfc650ce69822a7c)