Export limit exceeded: 424212 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16440 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2018-25198 | 1 Gaijin | 1 Etoolz | 2026-04-15 | 6.2 Medium |
| eToolz 3.4.8.0 contains a denial of service vulnerability that allows local attackers to crash the application by supplying oversized input buffers. Attackers can create a payload file containing 255 bytes of data that triggers a buffer overflow condition when processed by the application. | ||||
| CVE-2026-34971 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 7.8 High |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2026-34987 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 9.9 Critical |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2026-35195 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 5.4 Medium |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings between components contains a bug where the return value of a guest component's realloc is not validated before the host attempts to write through the pointer. This enables a guest to cause the host to write arbitrary transcoded string bytes to an arbitrary location up to 4GiB away from the base of linear memory. These writes on the host could hit unmapped memory or could corrupt host data structures depending on Wasmtime's configuration. Wasmtime by default reserves 4GiB of virtual memory for a guest's linear memory meaning that this bug will by default on hosts cause the host to hit unmapped memory and abort the process due to an unhandled fault. Wasmtime can be configured, however, to reserve less memory for a guest and to remove all guard pages, so some configurations of Wasmtime may lead to corruption of data outside of a guest's linear memory, such as host data structures or other guests's linear memories. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2024-7139 | 2026-04-15 | 6.5 Medium | ||
| Due to an unchecked buffer length, a specially crafted L2CAP packet can cause a buffer overflow. This buffer overflow triggers an assert, which results in a temporary denial of service. If a watchdog timer is not enabled, a hard reset is required to recover the device. | ||||
| CVE-2025-4422 | 1 Insyde | 1 Insydeh2o | 2026-04-15 | 8.2 High |
| The vulnerability was identified in the code developed specifically for Lenovo. Please visit "Lenovo Product Security Advisories and Announcements" webpage for more information about the vulnerability. https://support.lenovo.com/us/en/product_security/home | ||||
| CVE-2021-47705 | 1 Commax | 1 Ums Client Activex Control | 2026-04-15 | N/A |
| COMMAX UMS Client ActiveX Control 1.7.0.2 contains a heap-based buffer overflow vulnerability that allows attackers to execute arbitrary code by providing excessively long string arrays through multiple functions. Attackers can exploit improper boundary validation in CNC_Ctrl.dll to cause heap corruption and potentially gain system-level access. | ||||
| CVE-2025-48499 | 1 Fujifilm | 8 Apeos 2150, Apeos 2350, Docuprint M115 W and 5 more | 2026-04-15 | 5.3 Medium |
| Out-of-bounds write vulnerability exists in FUJIFILM Business Innovation MFPs. A specially crafted IPP (Internet Printing Protocol) or LPD (Line Printer Daemon) packet may cause a denial-of-service (DoS) condition on an affected MFP. Resetting the MFP is required to recover from the denial-of-service (DoS) condition. | ||||
| CVE-2020-26312 | 2026-04-15 | 8.1 High | ||
| Dotmesh is a git-like command-line interface for capturing, organizing and sharing application states. In versions 0.8.1 and prior, the unsafe handling of symbolic links in an unpacking routine may enable attackers to read and/or write to arbitrary locations outside the designated target folder. The routine `untarFile` attempts to guard against creating symbolic links that point outside the directory a tar archive is extracted to. However, a malicious tarball first linking `subdir/parent` to `..` (allowed, because `subdir/..` falls within the archive root) and then linking `subdir/parent/escapes` to `..` results in a symbolic link pointing to the tarball’s parent directory, contrary to the routine’s goals. This issue may lead to arbitrary file write (with same permissions as the program running the unpack operation) if the attacker can control the archive file. Additionally, if the attacker has read access to the unpacked files, they may be able to read arbitrary system files the parent process has permissions to read. As of time of publication, no patch for this issue is available. | ||||
| CVE-2025-25050 | 2026-04-15 | 8.8 High | ||
| An out-of-bounds write vulnerability exists in the cv_upgrade_sensor_firmware functionality of Dell ControlVault3 prior to 5.15.10.14 and Dell ControlVault 3 Plus prior to 6.2.26.36. A specially crafted ControlVault API call can lead to an out-of-bounds write. An attacker can issue an API call to trigger this vulnerability. | ||||
| CVE-2024-47897 | 2026-04-15 | 8.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls resulting in platform instability and reboots. | ||||
| CVE-2025-32022 | 2026-04-15 | 4.6 Medium | ||
| Finit provides fast init for Linux systems. Finit's urandom plugin has a heap buffer overwrite vulnerability at boot which leads to it overwriting other parts of the heap, possibly causing random instabilities and undefined behavior. The urandom plugin is enabled by default, so this bug affects everyone using Finit 4.2 or later that do not explicitly disable the plugin at build time. This bug is fixed in Finit 4.12. Those who cannot upgrade or backport the fix to urandom.c are strongly recommended to disable the plugin in the call to the `configure` script. | ||||
| CVE-2024-45320 | 2026-04-15 | N/A | ||
| Out-of-bounds write vulnerability exists in DocuPrint CP225w 01.22.01 and earlier, DocuPrint CP228w 01.22.01 and earlier, DocuPrint CM225fw 01.10.01 and earlier, and DocuPrint CM228fw 01.10.01 and earlier. If an affected MFP processes a specially crafted printer job file, a denial-of-service (DoS) condition may occur. | ||||
| CVE-2021-47774 | 1 Kingdia | 1 Cd Extractor | 2026-04-15 | 9.8 Critical |
| Kingdia CD Extractor 3.0.2 contains a buffer overflow vulnerability in the registration name field that allows attackers to execute arbitrary code. Attackers can craft a malicious payload exceeding 256 bytes to overwrite Structured Exception Handler and gain remote code execution through a bind shell. | ||||
| CVE-2025-34105 | 1 Flexense | 1 Diskboss | 2026-04-15 | N/A |
| A stack-based buffer overflow vulnerability exists in the built-in web interface of DiskBoss Enterprise versions 7.4.28, 7.5.12, and 8.2.14. The vulnerability arises from improper bounds checking on the path component of HTTP GET requests. By sending a specially crafted long URI, a remote unauthenticated attacker can trigger a buffer overflow, potentially leading to arbitrary code execution with SYSTEM privileges on vulnerable Windows hosts. | ||||
| CVE-2023-51452 | 2026-04-15 | 3 Low | ||
| A Improper Input Validation issue affecting the v2_sdk_service running on a set of DJI drone devices on the port 10000 could allow an attacker to cause a crash of the service through a crafted payload triggering a missing input size check in the pull_file_v2_proc function implemented in the libv2_sdk.so library used by the dji_vtwo_sdk binary implementing the service, compromising it in a term of availability and producing a denial-of-service attack. Affected models are Mavic 3 Pro until v01.01.0300, Mavic 3 until v01.00.1200, Mavic 3 Classic until v01.00.0500, Mavic 3 Enterprise until v07.01.10.03, Matrice 300 until v57.00.01.00, Matrice M30 until v07.01.0022 and Mini 3 Pro until v01.00.0620. | ||||
| CVE-2025-10451 | 1 Insyde | 1 Insydeh2o | 2026-04-15 | 8.2 High |
| Unchecked output buffer may allowed arbitrary code execution in SMM and potentially result in SMM memory corruption. | ||||
| CVE-2023-51453 | 2026-04-15 | 3 Low | ||
| A Improper Input Validation issue affecting the v2_sdk_service running on a set of DJI drone devices on the port 10000 could allow an attacker to cause a crash of the service through a crafted payload triggering a missing input size check in the process_push_file function implemented in the libv2_sdk.so library used by the dji_vtwo_sdk binary implementing the service, compromising it in a term of availability and producing a denial-of-service attack. Affected models are Mavic 3 Pro until v01.01.0300, Mavic 3 until v01.00.1200, Mavic 3 Classic until v01.00.0500, Mavic 3 Enterprise until v07.01.10.03, Matrice 300 until v57.00.01.00, Matrice M30 until v07.01.0022 and Mini 3 Pro until v01.00.0620. | ||||
| CVE-2023-51456 | 1 Dji | 5 Matrice 300 Firmware, Matrice M30 Firmware, Mavic 3 Firmware and 2 more | 2026-04-15 | 6.8 Medium |
| A Improper Input Validation issue affecting the v2_sdk_service running on a set of DJI drone devices on the port 10000 could allow an attacker to trigger an out-of-bound read/write into the process memory through a crafted payload due to a missing input sanity check in the v2_pack_array_to_msg function implemented in the libv2_sdk.so library imported by the v2_sdk_service binary implementing the service, potentially leading to a memory information leak or an arbitrary code execution. Affected models are Mavic 3 Pro until v01.01.0300, Mavic 3 until v01.00.1200, Mavic 3 Classic until v01.00.0500, Mavic 3 Enterprise until v07.01.10.03, Matrice 300 until v57.00.01.00, Matrice M30 until v07.01.0022 and Mini 3 Pro until v01.00.0620. | ||||
| CVE-2025-53524 | 1 Fujielectric | 1 Monitouch V-sft | 2026-04-15 | 7.8 High |
| Fuji Electric Monitouch V-SFT-6 is vulnerable to an out-of-bounds write while processing a specially crafted project file, which may allow an attacker to execute arbitrary code. | ||||