| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: inherit FMODE_NONOTIFY when opening directory realfiles
When fanotify hands a listener an fd for a permission event on an
overlay directory, ovl_dir_open_realfile() opens the real directory via
dentry_open(), not backing_file_open(), so the lower open could still
raise FS_OPEN_PERM and deadlock a listener that also marks the backing
filesystem.
Export dentry_open_nonotify() and call it from ovl_path_open_realfile()
when the overlay user file must not generate events. Ordinary
ovl_path_open() callers are unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
net: reject a negative TCP header offset in qdisc_pkt_len_segs_init()
qdisc_pkt_len_segs_init() stores skb_transport_offset(), or the inner
offset, in the unsigned hdr_len. A header in front of skb->data gives a
negative offset. For an offset a little below zero, pskb_may_pull() gets a
small length and succeeds. Then a 64-bit kernel reads the TCP header far
after the skb and can crash. Further below zero pskb_may_pull() fails.
Commit 28a57fb2c5df ("net: iptunnel: fix stale transport header during
tunnel decapsulation") fixed one source of such offsets. Other code that
removes bytes from the front of a packet can leave the same stale header.
Return SKB_DROP_REASON_SKB_BAD_GSO for a negative offset in the TCP branch.
SKB_GSO_UDP_L4 and the other GSO types read no header and still get a wrong
qdisc_pkt_len(). On a 64-bit kernel only packets that cause the read after
the skb today get a new result. Then __dev_queue_xmit() drops them and
returns -EINVAL, but sch_handle_ingress() ignores the result. Their content
can be valid. Thus the code that leaves the header stale needs its own fix. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/vsock: size receive SKBs from declared payload
vhost_vsock_alloc_skb() sizes the skb from iov_length(), the total guest
descriptor length. virtio_transport_inc_rx_pkt() instead adds hdr->len to
rx_bytes and buf_used, and budgets each queued skb as SKB_TRUESIZE(0). The
guest controls the descriptor length and hdr->len independently.
A guest can therefore provide a 64 KiB descriptor while declaring a zero
payload. The descriptor-sized skb remains queued, rx_bytes and buf_used
remain unchanged, and only the fixed queue-entry budget limits retention.
This is not a lifetime leak: the skb is freed when dequeued or at socket
teardown. Repeating this across connections can nevertheless exhaust host
memory. On Linux v7.2, 455 such descriptors retained 30,255,680 bytes for
a 262,144-byte receive buffer; a full-payload control retained 265,984
bytes.
Vhost previously read hdr->len and allocated pkt->buf from that value. The
conversion from virtio_vsock_pkt to sk_buff instead allocated receive skbs
from the descriptor length, introducing the allocation-accounting mismatch.
Copy the header into a stack object and validate hdr->len before allocating
the skb. Size the allocation as sizeof(hdr) + payload_len so descriptor
capacity no longer determines queued memory. Check payload_len against
len - sizeof(hdr) to avoid addition overflow on 32-bit hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: do not use Fast Open on MP_JOIN subflows
tcp_fastopen_create_child() hands the SYN packet itself to
subflow_syn_recv_sock(). For an MP_JOIN request this takes the
fatal fallback: the cloned child is destroyed and handed back with
drop_req flagged, but tcp_fastopen_create_child() does not check
the flag and queues it, so accept() can expose the freed child.
MP_JOIN cannot use Fast Open: data on a subflow requires the
completed HMAC exchange (RFC 8684, sec. 3.2). Refuse it (only the
TFO path passes a SYN skb here) and let tcp_conn_request() fall
back to the regular MP_JOIN handshake; also strip the Fast Open
cookie from MP_JOIN SYN/ACKs.
[ Moving code to avoid clearing TS and consolidating checks. ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: keep the CS user fence BO in GTT
The CS ioctl hands the GPU the GART address of the user fence BO, but
since the BO keeps its own preferred and allowed domains, it no longer
makes sure the BO is in GTT. A user fence in a VRAM BO, which only needs
to be a page in size, gets its address from amdgpu_bo_gpu_offset(), which
warns about non-contiguous VRAM. On navi31, a CS with a user fence in a
4K VRAM BO, or in one created with AMDGPU_GEM_CREATE_VM_ALWAYS_VALID:
WARNING: amdgpu_object.c:1531 at amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu], CPU#11: cs_gem_checks/18393
RIP: 0010:amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu]
Call Trace:
<TASK>
amdgpu_cs_parser_bos.isra.0+0x4eb/0x850 [amdgpu]
amdgpu_cs_ioctl+0x97e/0x2510 [amdgpu]
drm_ioctl_kernel+0xac/0x110 [drm]
drm_ioctl+0x2c6/0x5b0 [drm]
__x64_sys_ioctl+0xa0/0xf0
do_syscall_64+0xa3/0x4d0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
and BOs which can't be in GTT at all, like GWS or OA ones of a page in
size, pass the checks as well.
Only take BOs which can't be anywhere else than in GTT as user fence,
which the CS then validates there along with its other BOs. While at it,
detect userptrs with amdgpu_ttm_tt_is_userptr(); amdgpu_ttm_tt_get_usermm()
returns NULL once the task which created the userptr is gone.
v2: only take BOs which can only be in GTT instead of special casing the
user fence BO in the validation, use amdgpu_ttm_tt_is_userptr()
(Christian)
(cherry picked from commit f16989def9561d04d0f2e77216f5319112d29bf1) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: use the queue's process info for the WPTR BO eviction fence
amdgpu_amdkfd_map_gtt_bo_to_gart() removes the eviction fence of
bo->vm_bo->vm->process_info from the WPTR BO of a new queue. bo->vm_bo
is the VM which opened the BO last, not necessarily the KFD process' VM,
and a render node VM has no process info.
On navi31, an unprivileged process which exports its WPTR BO with
AMDKFD_IOC_EXPORT_DMABUF and imports it on a second render node fd
oopses in AMDKFD_IOC_CREATE_QUEUE:
BUG: kernel NULL pointer dereference, address: 0000000000000060
RIP: 0010:amdgpu_amdkfd_map_gtt_bo_to_gart+0x86/0x1a0 [amdgpu]
init_user_queue.part.0+0x180/0x250 [amdgpu]
pqm_create_queue+0x32d/0x730 [amdgpu]
kfd_ioctl_create_queue+0x583/0x9f0 [amdgpu]
Pass the process info of the queue instead. With the fix, the queue is
created and destroyed normally.
(cherry picked from commit 6b4157498a176bd1c6083f6bb5aaf8a257a2027e) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: check amdgpu_vm_ready() in dma-buf move notify
amdgpu_dma_buf_move_notify() touches the page tables without first
calling amdgpu_vm_ready(). When a process is SIGKILLed, its VM entities
are stopped. Teardown of an imported dma-buf then tries to clear PTEs by
submitting to one of those stopped entities. That eventually hangs the
task.
Commit aa5fc4362fac ("drm/amdgpu: fix task hang from failed job
submission during process kill") added the stopped entity check in
amdgpu_vm_ready() and used it in amdgpu_cs_vm_handling(). That did not
cover a call in amdgpu_dma_buf_move_notify(), what was already mentioned
in:
https://lists.freedesktop.org/archives/amd-gfx/2025-October/133076.html
Tested by SIGKILLing a GPU workload holding imported dma-bufs. Without
the patch "Trying to push to a killed entity" errors are logged, then a
task hangs. With the patch there are no hung tasks. This was tested on a
6.18 kernel.
(cherry picked from commit bee5c9d7a34cb1b510ad3b4c18c30f9d38b0ab7d) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: validate the moved individual BOs on restore
An individual BO of a user queue VM, i.e. one which doesn't share the
root reservation, goes to the individual needs_update list when it is
evicted. The user queue restore looked at vm->invalidated for them, which
the VM state machine rework turned into the always_valid evicted list and
commit 18decfc9e8cc ("drm/amdgpu/userq: actually validate userq BOs")
into the individual evicted one. That list only holds imported DMA-bufs of
compute VMs though, so for a user queue VM nothing is validated.
The restore then neither locks such a BO nor moves it back. Its PTEs are
updated to wherever it is now, cleared if it went to system memory, and
it doesn't get the new eviction fence, so it can move again under the
running queue.
On navi48, once the BOs of an SDMA user queue are evicted from GTT
(debugfs amdgpu_evict_gtt) the queue faults on its ring and rptr:
amdgpu 0000:03:00.0: in page starting at address 0x0000000100000000 from client 10
amdgpu 0000:03:00.0: Faulty UTCL2 client ID: SDMA0 (0xd)
amdgpu 0000:03:00.0: in page starting at address 0x0000000100101000 from client 10
Validate the BOs on the individual needs_update list like before.
(cherry picked from commit eb0d94765d4be18d41e93ad09947dd9cc06ed31a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts for navi10_ih
Port this change to navi10_ih.c:
commit afbf7955ff01 ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts")
Setting IH_RB_WPTR to 0 does not clear RB_OVERFLOW if RB_ENABLE is not
set. Pulse WPTR_OVERFLOW_CLEAR after RB_ENABLE (and with
WPTR_OVERFLOW_ENABLE) so overflow is cleared when interrupts are
enabled.
(cherry picked from commit 713fb4ab04f4d2af6120f8eb607c5673b2759b38) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid closing unowned DDC pins
[WHY]
dal_ddc_open() cleans up pins it acquires on later failures. If the
data-pin open fails, this attempt acquired nothing. If opening the
clock pin or configuring fails, dal_ddc_open() closes the pins it
opened. An extra dal_ddc_close() is unnecessary and unsafe:
GPIO_RESULT_ALREADY_OPENED can mean AUX owns the existing handles,
and closing them here would disrupt AUX.
[HOW]
Remove the extra dal_ddc_close() from the failed-open path.
(cherry picked from commit 175ae7772b68757b4932f34ff862923cab7abe21) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx12: disallow GFXOFF while updating the SPM VMID
gfx_v12_0_update_spm_vmid() does a read-modify-write of RLC_SPM_MC_CNTL
over MMIO without keeping GFX powered, unlike gfx11. When GFX is in
GFXOFF at that point the update doesn't stick, and with the SPM VMID
programmed on submission again, the job of a process with a reserved
VMID can still run with the SPM writing through VMID 0.
On navi48, after a few other submissions and a VM fault on the same VM,
a COPY_DATA of RLC_SPM_MC_CNTL from such a job reads 0 although the
update was called for it:
$ amd_uapi_regression --run-subtest cs-secure-ib-compute,gem-mapping-info-high-va,gpuvm-fault-high-va,reserved-vmid-spm-vmid
amdgpu 0000:03:00.0: [gfxhub] page fault (src_id:0 ring:40 vmid:7 pasid:185)
amdgpu 0000:03:00.0: Faulty UTCL2 client ID: SDMA1 (0xe)
RLC_SPM_MC_CNTL in the job: 0x00000000
With GFXOFF disallowed around the update it reads the reserved VMID 15.
(cherry picked from commit 907aebc5578ae09fa5c0e2f0784201295837e60b) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL deref in dcn401_update_clocks_update_dtb_dto
[Why]
resource_get_otg_master_for_stream() can return NULL if no OTG master pipe
is found for a given stream. The current code dereferences this pointer
without a NULL check. This may lead to a possible NULL pointer
dereference.
[How]
Add an explicit NULL check and skip the stream if the OTG master is not
found. This is similar to dcn60_update_clocks_update_dtb_dto().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
(cherry picked from commit ffde3d74c1faeeb645b66d02d02fdae3e073941b) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix duplicate dependency fence releases
drm_sched_job_add_dependency() consumes its fence reference on success
and failure. Do not release the fence again if
drm_sched_job_add_dependency() fails.
(cherry picked from commit e04f3dfb2071451633e6440a3911a9bb65df9144) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Report MES ring wait timeouts.
Return -ETIMEDOUT when the fence wait before submission expires instead
of reporting success without submitting the packet.
(cherry picked from commit 34341594a87b4a3f28be41e3e70a4787f02b3d9e) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Clamp the ATIF backlight curve to its 99 points
amdgpu_atif_query_backlight_caps() stores the firmware's number_of_points
as data_points but copies only the 99 points that luminance_data[] holds.
number_of_points is a u8, so a firmware table that claims more makes the
custom curve code in amdgpu_dm index past the array, and
dm_query_extended_brightness_caps() copy past the end of the
data_points[] buffer it fills
Clamp the count to ATIF_QBTC_MAX_DATA_POINTS and warn, since a table
that claims more is a firmware bug
(cherry picked from commit af8a1c2b7d3de4960e10f94e8ba2fc0ccd168072) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: drop the dma-buf reference when a KFD import fails
import_obj_create() takes a reference on the dma-buf for the new kgd_mem,
but the error path after validating the BO doesn't drop it. Since the
validation reserves the BO interruptibly, an import failing with
-ERESTARTSYS leaks the exported BO with its memory, and keeps the module
in use.
Importing a 64 MiB VRAM BO in a loop while getting SIGUSR1
every 20 us and another thread changes the BO's mappings:
INFO: 171821 imports, VRAM used before 65 MiB, after 129 MiB
modprobe: FATAL: Module amdgpu is in use.
Drop the reference, and free the sync object and the mutex of the kgd_mem
as well. With that VRAM usage returns to 65 MiB after the same test.
(cherry picked from commit b4d1eca2729840148ff2ea957724ce764ca5a94e) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: unlock the VM and BO when attaching a KFD BO fails
kfd_mem_attach() locks the page directory and the BO with a drm_exec
transaction on its stack, but leaves through the unwind label without
drm_exec_fini() when locking fails, e.g. when MAP_MEMORY_TO_GPU gets a
signal while the page directory or the BO is busy. Reservations already
acquired then remain locked with their ww_acquire_ctx pointing into the
expired stack frame.
With one thread doing GEM_VA map/unmap on the KFD VM and
another one mapping KFD BOs while getting SIGUSR1 every 20 us:
BUG: KASAN: stack-out-of-bounds in __ww_mutex_lock.constprop.0+0x34f5/0x3da0
ww_mutex_lock_interruptible+0x2f/0x150
drm_exec_lock_obj+0x107/0x2d0 [drm_exec]
kfd_mem_attach+0x4dd/0x1b60 [amdgpu]
and the process ends up in D state.
Finish the transaction before unwinding.
(cherry picked from commit 7b885fa27e4b9fa5cbdc64e66fc35872aee296f5) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: don't walk the CS chunks when allocating them failed
amdgpu_cs_pass1() sets p->nchunks before allocating p->chunks, and the
allocation failure path skips resetting it. amdgpu_cs_parser_fini() then
frees the kdata of nchunks chunks from a NULL array. On navi48 with the
chunk array allocation failed through failslab:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:amdgpu_cs_parser_fini+0x35d/0x710 [amdgpu]
amdgpu_cs_ioctl+0xcae/0x7a20 [amdgpu]
drm_ioctl_kernel+0x180/0x320 [drm]
Set nchunks once the array exists.
(cherry picked from commit 0c828445757b86aaa3ed2638832d76f450022bdf) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: don't drop the gang dependency fence twice
drm_sched_job_add_dependency() drops the fence reference when it fails,
but amdgpu_cs_submit() drops it again, so the scheduled fence of a gang
member loses a reference it still needs.
A GFX+COMPUTE gang waiting for another context, with the
xarray node allocation for the leader's dependency failed through
failslab:
WARNING: drivers/dma-buf/dma-fence.c:589 at dma_fence_release+0x34d/0x730, CPU#1: amd_uapi_regres/2993
drm_sched_job_cleanup+0x2c2/0x340 [gpu_sched]
amdgpu_job_free+0xcb/0x3e0 [amdgpu]
amdgpu_cs_parser_fini+0x435/0x710 [amdgpu]
amdgpu_cs_ioctl+0xcd2/0x7a60 [amdgpu]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:dma_fence_signal_timestamp_locked+0x1b8/0x610
(cherry picked from commit 5aa070a83c8378810b906cc8bfc650ce69822a7c) |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: don't return memory contents beyond valid data when reading ANA log page
The host side does not know how much valid data will be returned by the target
so it will typically provide a buffer larger than the amount of valid data in
the ANA log page. The memory allocation used by the target does not guarantee
that prior kernel memory contents will not be returned past the end of the valid
page data. Fix this to ensure that the SGL is zeroed before copying the data. |