| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mshv_vtl: detach poll waiter on POLLFREE
MSHV_SET_POLL_FILE keeps a poll wait entry after the ioctl returns. A
file reference does not always pin the registered waitqueue:
signalfd_poll() uses current->sighand->signalfd_wqh, whose lifetime is
tied to the task.
signalfd_cleanup() sends POLLFREE before the sighand is freed. The MSHV
callback currently leaves its entry linked, so __wake_up_pollfree()
warns and a later replacement calls remove_wait_queue() through a stale
wqh pointer. A source-equivalent KASAN run reproduced:
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave
_raw_spin_lock_irqsave
remove_wait_queue
harness_ioctl [mshv_pollfree_harness]
The object belonged to sighand_cache and had been released through
slab_free_after_rcu_debug() after __cleanup_sighand().
On POLLFREE, unlink the entry under the provider waitqueue lock. Preserve
the existing CPU cancellation before publishing a NULL wqh, since a NULL
load lets a racing replacement reuse the persistent poll state. Use a
matching acquire load under RCU when removing a normal registration.
The callback takes no mutex and does not sleep, so the existing
mutex-to-waitqueue-lock order is unchanged.
An LLM assisted the source audit, fix development, and validation of this
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: khugepaged: fix swap entry value to folio_pfn()
Patch series "mm: khugepaged: fix tracepoint UAF", v5.
The khugepaged tracepoints take a folio pointer and call folio_pfn(), but
by then the folio may no longer be valid: freed after folio_put(),
folio_unlock() or pte_unmap_unlock(), or not a folio at all but an
xarray-encoded swap entry. On classic SPARSEMEM, dereferencing it oopses
khugepaged as soon as the trace event is enabled; on other memory models
it merely prints a bogus pfn.
Pass the pfn to the tracepoints directly, captured while the folio is
still pinned, closing the use-after-free windows in
mm_khugepaged_scan_file(), mm_khugepaged_scan_pmd() and
mm_khugepaged_collapse_file().
This patch (of 3):
When the swap entries found exceed max_ptes_swap, the loop is left via
break with folio still holding the xarray value that encodes the swap
entry, not valid folio pointer.
That value is passed to trace_mm_khugepaged_scan_file(), which feeds it to
folio_pfn(). On FLATMEM and SPARSEMEM_VMEMMAP, the page_to_pfn() is plain
pointer arithmetic, so the trace event merely prints bogus scan_pfn. On
classic SPARSEMEM, the page_to_pfn() reads page->flags, dereferencing the
tiny encoded integer and oopsing khugepaged whenever the trace event is
enabled.
So when folio is the swap entry value, simply set pfn to -1, just like
exhausted scan naturally.
And the folio_put() has maybe dropped the last reference of folio. The
trace_mm_khugepaged_scan_file() is left with a dangling folio pointer. so
using the folio_pfn() before dropping the reference, closing
use-after-free window. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: don't discard lazyfree THPs at PMD level
__discard_anon_folio_pmd_locked() clears a lazyfree THP's PMD before it
determines whether the folio can be discarded, and restores it if the
folio is dirty or has extra references. It is done under only the PMD
lock and the anon_vma read lock inside try_to_unmap_one() and no mmap lock
is held. The temporarily none PMD causes UAF.
A parallel munmap() or mremap() is supposed to serialize with it on the
PMD lock, but zap_pmd_range() (called by munmap()) and move_page_tables()
(called by mremap()) do not take the lock when they see the temporarily
none PMD and skip the PMD. There is no more page table walk after the
none PMD is restored:
- munmap(): free_pgtables() waits in unlink_anon_vmas() for the anon_vma
lock, then free_pmd_range() drops the restored PMD as bad without
removing the rmap, so the folio keeps a stale mapcount.
- whole-VMA MREMAP_DONTUNMAP: dontunmap_complete() unlinks the source VMA
from its anon_vma while the restored PMD still maps the folio.
- plain mremap(): the THP is not moved but unmapped, so the THP's data is
lost.
In the first two cases, the folio stays mapped, but no VMA that maps it is
linked to its anon_vma. When the anon_vma is freed, it is still reachable
when one rmap walks the folio. Racing lazyfree reclaim against
MREMAP_DONTUNMAP as an unprivileged user reproduces a KASAN use-after-free
in folio_lock_anon_vma_read() as reported in the Closes link.
One solution is to use an invalidated PMD instead of a cleared one until
the discard is committed, but it needs arch fixes first.
1. GUP-fast still follows an invalidated PMD on riscv, LoongArch and s390.
2. sparc64 miscounts thp_pte_count when an invalidated PMD is set again or
cleared.
To keep the fix simple for backport, stop discarding lazyfree THPs at PMD
level instead. try_to_unmap_one() splits the PMD and discards the folio at
PTE level.
unmap_huge_pmd_locked() and __discard_anon_folio_pmd_locked() are left in
place, unused, to minimize this fix for backport and the invalidated PMD
approach is planned as a follow-up series to use them again. |
| In the Linux kernel, the following vulnerability has been resolved:
media: redrat3: fix UAF in probe error path leaving rc device registered
redrat3 stores its device name and phys path inside the main rr3
structure, and the rc device's device_name and input_phys point into
rr3. When the RC device is registered, it keeps those pointers.
KASAN: slab-use-after-free in string_nocheck lib/vsprintf.c:648
Read of size 1 at addr ffff888051fda758 by task udevd/7464
Call Trace:
string_nocheck lib/vsprintf.c:648 [inline]
string+0x216/0x2d0 lib/vsprintf.c:730
vsnprintf+0x74a/0xef0 lib/vsprintf.c:2945
vscnprintf+0x41/0x90 lib/vsprintf.c:3014
sysfs_emit+0x10e/0x180 fs/sysfs/file.c:761
input_dev_show_name+0x58/0x70 drivers/input/input.c:1282
Allocated by task 10:
redrat3_dev_probe+0x477/0x2570 drivers/media/rc/redrat3.c:1023
Freed by task 10:
redrat3_delete drivers/media/rc/redrat3.c:466 [inline]
redrat3_dev_probe+0x1bf4/0x2570 drivers/media/rc/redrat3.c:1124
Syzkaller triggers this via usb probing. It probes the RedRat3 USB
interface, which calls redrat3_dev_probe() in redrat3.c. That function
allocates rr3, then builds an rc device whose name points into rr3 via
redrat3_init_rc_dev() in redrat3.c, and registers it with
rc_register_device().
When the detector enable fails after the RC device is registered, the
probe jumps to the led_free path. That path unregisters the LED but does
not unregister the RC device before freeing rr3 via redrat3_delete() in
redrat3.c. The RC device still holds device_name = rr3->name which is now
freed.
Later udevd reads /sys/.../input device name via sysfs_emit() in file.c,
which calls input_dev_show_name() in input.c, which emits dev->name which
is the freed rr3->name.
When the detector enable fails after the RC device is registered, the
error path must not leave the RC device registered. Make the probe error
path clean up the same way redrat3_dev_disconnect() does.
This change should be safe because the RC device is fully registered at
this point and its teardown via rc_unregister_device() is protected by
the input device mutex, and rr3 is still alive during unregister so
device_name remains valid until after unregister. The URBs are killed
before rc_free, so no completion can run after rc is freed. No new lock
ordering is introduced. |
| In the Linux kernel, the following vulnerability has been resolved:
media: microchip-isc: take a reference on the parsed endpoints
for_each_endpoint_of_node() drops the reference on the current node as
it advances. xisc_parse_dt() and isc_parse_dt() store the node in
subdev_entity->epn and release it later with of_node_put(), but never
took their own reference, so the stored pointer refers to an
already-released node. This underflows the refcount and can
use-after-free, reachable through the camera device tree overlay.
Take a reference with of_node_get() when storing the node, and drop it
in microchip_isc_subdev_cleanup() so the entities the bind loop never
reaches on an early exit do not leak it. |
| PHP-FPM status endpoint XSS via unescaped user and script fields.
The PHP-FPM full status output includes the request method, authentication user and script filename of each worker without escaping them for the HTML, XML or JSON format. When the status endpoint is enabled, an unauthenticated remote attacker can store markup in a worker's scoreboard entry with an ordinary request, for example through the username of an HTTP Basic authentication header that the web server forwards to PHP-FPM, or through the script filename where the attacker can influence it. When a user views the full status page as HTML, the injected JavaScript runs in the origin of that page. The attacker does not need access to the status endpoint. Malformed XML or JSON output can also disrupt monitoring tools.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
media: microchip-csi2dc: fix async notifier leak on probe error path
csi2dc_of_parse() ends up calling csi2dc_prepare_notifier(), which
registers the V4L2 async notifier with v4l2_async_nf_register(). The
probe error label csi2dc_probe_cleanup_notifier is reached after
csi2dc_of_parse() has already succeeded (e.g. when media entity init,
csi2dc_power() or v4l2_async_register_subdev() fail), but it calls only
v4l2_async_nf_cleanup() and never v4l2_async_nf_unregister().
The notifier therefore stays chained in the global notifier_list while
the enclosing struct csi2dc_device is freed, leading to list corruption
and a use-after-free when the list is next walked.
Unregister the notifier before cleaning it up on the error path,
matching the teardown already done in csi2dc_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: marvell: mcam: stop DMA and cancel s_bh_work before freeing DMA buffers
In vmalloc mode the frame-completion IRQ queues mcam_frame_work() on
cam->s_bh_work, which memcpy()s from the dma_bufs[] that
mcam_free_dma_bufs() frees with dma_free_coherent(). mccic_shutdown()
frees those buffers without stopping the controller, so while streaming
a late frame IRQ can re-arm the work after the buffers are gone, causing a
use-after-free.
Stop the controller in mccic_shutdown() when streaming is still active
(gated on an open fd, which holds a runtime-PM reference, so the device
is powered), cancel s_bh_work in mcam_free_dma_bufs(), and move
INIT_WORK() into mccic_register() before the device can be published. |
| SOAP use-after-free when processing DTD entity references.
The SOAP extension frees the document type definition (DTD) of a parsed XML document while attribute values can still refer to entities it owns, and can then read freed memory. Removing the DTD also bypasses the SOAP server's rejection of documents that contain one. An unauthenticated remote attacker who can send a crafted request to a SOAP endpoint, or who controls a WSDL or schema document loaded by the application, can crash the PHP process and cause denial of service. Memory disclosure and code execution have not been confirmed.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| PHP-CGI out-of-bounds read and write during PATH_INFO correction.
The PHP CGI binary (php-cgi), in CGI and FastCGI mode with cgi.fix_pathinfo enabled (the default), can perform an out-of-bounds read and write when the path removed from SCRIPT_FILENAME or PATH_TRANSLATED is longer than the supplied PATH_INFO, or when PATH_INFO is empty. This requires a web server mapping that passes such inconsistent values, or a FastCGI listener reachable by untrusted clients. An unauthenticated remote attacker can crash the process, may obtain process memory if the application exposes PATH_INFO or PATH_TRANSLATED, and may corrupt memory. PHP-FPM and the Apache module are not affected.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
media: gspca: use vb2_video_unregister_device() on disconnect
gspca uses vb2_fop_release(), but gspca_disconnect() only unregisters
the video device. If the queue owner closes the device after USB
disconnect, vb2_fop_release() releases the queue and invokes
gspca_stop_streaming() at that point.
gspca_stream_off() calls subdriver stop callbacks and
usb_set_interface() through gspca_dev->dev. By the time the late close
runs, the USB core can have freed the usb_device, resulting in a
use-after-free. This was observed as a KASAN use-after-free in sd_stopN().
Use vb2_video_unregister_device() so the queue is released and streaming
is stopped synchronously during disconnect, while the usb_device is still
valid. Since the helper takes the queue lock, which is usb_lock, call it
after dropping that lock. |
| PHAR OpenSSL signature bypass via algorithm downgrade.
The Phar extension selects the signature verification method from the signature type stored in the archive, and only the OpenSSL types consult the separate .pubkey file holding the trusted public key. An attacker who can modify an OpenSSL-signed Phar archive, but not its public key file, can switch the signature type to a keyless hash such as SHA-256 with a recomputed digest, so the altered archive passes verification even with phar.require_hash enabled. An application that loads the archive may then execute attacker-controlled PHP code. Native, tar-based and zip-based phars are affected.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: unregister DVB bus when SP2 CI setup fails
The DVBSKY S950C, DVBSKY T980C and TechnoTrend CT2-4500 CI paths register
the DVB bus before attaching their SP2 CI client. If that client cannot be
created, bound, or pinned, the current error path removes the I2C frontend
components and only deallocates the frontend list, leaving the registered
DVB adapter behind. Removing an I2C demod before unregistering the DVB bus
can also expose the use-after-free ordering fixed for the normal remove
path.
Unregister the DVB bus immediately when SP2 CI setup fails, before the
existing I2C client cleanup. The bus helper empties the frontend list, so
the later frontend deallocation has nothing left to release. Keep failures
from vb2_dvb_register_bus() on the existing cleanup path. Also release an
unbound SP2 client and propagate the actual I2C creation or CI registration
error.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hiddev: keep state alive through disconnect unlock
mutex_unlock() clears the mutex owner before taking its wait lock. A
thread spinning in the final hiddev file release can acquire
existancelock after hiddev_disconnect() clears the owner, then free
hiddev before the disconnecting thread reaches the mutex wait lock. This
causes a use-after-free in the mutex slow unlock path.
Give the connection and each open file an explicit reference. Drop each
reference only after its existancelock critical section has completed,
so neither unlock path can free the mutex while the other is still using
it. |
| In the Linux kernel, the following vulnerability has been resolved:
genirq: Defer kfree(irqaction) until irq_thread_dtor() finishes
When an interrupt thread exits abnormally via do_exit() (e.g. the interrupt
handler oopses) without returning from irq_thread(), a concurrent call to
free_irq() could free the irqaction before the irq_thread_dtor() exit task
work runs.
irq thread (oopsed) free_irq()
------------------- ----------
do_exit()
exit_mm()
complete_vfork_done() -------> kthread_stop() returns
exit_files() ... kfree(action)
exit_task_work()
irq_thread_dtor()
action->... <- use-after-free
Track the pending exit work with the IRQTF_EXIT_WORK thread flag, and have
__free_irq() wait for the bit to clear before kfree().
irq_thread_dtor() only runs on irq_thread abnormal exit. If that dtor also
faults, free_irq() will hang indefinitely, but double IRQ thread faults
require a reboot anyways.
[ tglx: Add missing include ] |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: Set S_VERITY only after rollback is no longer possible
Commit f77f281b6118 ("fsverity: use a hashtable to find the
fsverity_info") changed the implementation of FS_IOC_ENABLE_VERITY to
make concurrent reads start going through fsverity verification slightly
earlier than they did before.
Instead of it happening when enable_verity() calls fsverity_set_info(),
it now happens when ->end_enable_verity() sets S_VERITY.
However, ext4 and btrfs can roll back verity after they set S_VERITY,
causing a use-after-free.
Fix that by making ext4 and btrfs set S_VERITY only after rollback is no
longer possible. On failure, don't roll back S_VERITY, but do roll back
the filesystem-specific verity flag.
Also update enable_verity() to handle any future instances of this bug
more safely by warning and *not* freeing the fsverity_info.
Finally, tweak some comments. Clarify one, and move information from
another to its proper place in the comment for ->end_enable_verity(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc/task_mmu: pin mm_users in do_pagemap_scan()
The PAGEMAP_SCAN ioctl takes mmap_read_lock() on an mm obtained from
/proc/<pid>/pagemap without holding a reference to mm_users.
proc_mem_open() deliberately grabs only mm_count, so a consumer that
touches the address space has to call mmget_not_zero() first. Every other
consumer in this file does -- m_start(), do_procmap_query(),
show_smaps_rollup() and pagemap_read() -- but do_pagemap_scan() does not.
Without that reference the target can reach exit_mmap() concurrently, and
exit_mmap() calls unmap_vmas() while holding mmap_lock only for reading,
which does not exclude the scanner. For ordinary VMAs this is harmless,
as free_pgtables() and remove_vma() run afterwards under mmap_write_lock.
A shared hugetlb VMA is different: __hugetlb_zap_end() frees the VMA's
hugetlb_vma_lock inside the read-locked phase.
walk_hugetlb_range() can therefore load vma->vm_private_data, have the
lock freed underneath it, and then down_read() a freed rw_semaphore. The
load happens before the freeing side clears the pointer, so this is a
use-after-free and not a NULL dereference. Any unprivileged user can
reach it with no huge pages configured, as hugetlb_reserve_pages()
allocates the lock before the VM_NORESERVE early return.
Pin mm_users across the scan, the way the other consumers do. mmput()
from the exiting task can then no longer reach exit_mmap() while a walk is
in progress.
[akpm@linux-foundation.org: remove unneeded & undesirable test for !mm] |
| Mixed-case HTTPS and FTPS URLs can expose data in plaintext.
The HTTP and FTP stream wrappers recognise URL schemes case-insensitively, but enable TLS only when the scheme contains a lowercase "s" at a fixed position. A URL such as HTTPS:// or FTPS:// passed to file_get_contents(), fopen() or other stream functions, or received as an HTTP redirect target, is therefore handled over unencrypted HTTP or FTP. An attacker able to observe the network traffic can read data the application expected TLS to protect, including credentials, request bodies and transferred files.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: atmel_lcdfb: Prevent FIFO work after removal
The LCD controller IRQ schedules sinfo->task to recover from a FIFO
underflow. Probe currently requests the IRQ before initializing the
work, so an early interrupt can schedule an uninitialized work item.
The probe error path and remove path cancel the work before freeing the
IRQ. A FIFO-underflow interrupt can schedule the work again after that
cancellation. framebuffer_release() may then free sinfo while the work
is still pending.
KASAN reported a use-after-free in atmel_lcdfb_task() when an underflow
interrupt occurred during removal. With the IRQ freed before the work
was cancelled, the same test completed without a kernel diagnostic.
Initialize the work before requesting the IRQ. In both cleanup paths,
free the IRQ before cancelling the work so that it cannot be scheduled
again after cancellation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix TOCTOU race between GROUP_REGISTERED check and erase
panthor_group_destroy() checks the GROUP_REGISTERED mark and then calls
xa_erase() without holding the xarray lock across both. If the handle is
destroyed by another thread in between, and a concurrent GROUP_CREATE
reuses the freed ID, the first destroy erases and releases the new,
still-initializing group, leading to a use-after-free in
panthor_group_create().
Do the mark check and erase atomically under xa_lock(). |