Export limit exceeded: 418227 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 418227 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (5401 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98943 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | N/A |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-103568 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-26 | 7.8 High |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Credential Providers allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-63942 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: parport: Fix race between port and client registration The parport subsystem registers port devices before they are fully initialised, resulting in a race condition where client drivers such as lp can attach to ports that are not completely initialised or even being torn down. When the port and client drivers are built as modules and loaded around the same time during boot, this occasionally results in a crash. I was able to make this happen reliably in a VM with a PC-style parallel port by patching parport_pc to fail probing: > --- a/drivers/parport/parport_pc.c > +++ b/drivers/parport/parport_pc.c > @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base, > if (!p) > goto out3; > > - base_res = request_region(base, 3, p->name); > + base_res = NULL; > if (!base_res) > goto out4; > and then running: while true; do modprobe lp & modprobe parport_pc wait rmmod lp parport_pc done for a few seconds. In the long term I think port registration should be changed to put the call to device_add() inside parport_announce_port(), but since the latter currently cannot fail this will require changing all port drivers. For now, add a flag to indicate whether a port has been "announced" and only try to attach client drivers to ports when the flag is set. | ||||
| CVE-2026-63944 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was obtained from an RCU-protected iteration over hdev->conn_hash.list and is not valid once these locks are dropped. A concurrent disconnect can free the hci_conn between the unlock and the dereference, causing a use-after-free read. The cancellation mechanism in hci_conn_del() cannot prevent this because hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL: hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL); While hci_conn_del() dequeues with data=conn: hci_cmd_sync_dequeue(hdev, NULL, conn, NULL); Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never matches, and the pending work item is not cancelled. Fix this by saving conn->conn_timeout into a local variable while the locks are still held, so the stale conn pointer is never dereferenced after unlock. This is the same class of bug as the one fixed by commit 035c25007c9e ("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which addressed the identical pattern in a different function. This vulnerability was identified using 0sec.ai, an open-source automated security auditing platform (https://github.com/0sec-labs). | ||||
| CVE-2026-63945 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock iso_sock_close() calls iso_sock_clear_timer() before acquiring lock_sock(sk). iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the socket lock held: if (!iso_pi(sk)->conn) return; cancel_delayed_work(&iso_pi(sk)->conn->timeout_work); Concurrently, iso_conn_del() executes under lock_sock(sk) and calls iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in the final reference to the connection being dropped: CPU0 CPU1 ---- ---- iso_sock_clear_timer() if (conn != NULL) ... lock_sock(sk) iso_chan_del() iso_pi(sk)->conn = NULL cancel_delayed_work(conn) /* NULL deref or UAF */ iso_pi(sk)->conn is not stable across the unlock window, causing a NULL pointer dereference or use-after-free. Serialize iso_sock_clear_timer() with the socket lock by moving it inside lock_sock()/release_sock(), matching the pattern used in iso_conn_del() and all other call sites. | ||||
| CVE-2026-98904 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-26 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: imx: Use devm_pm_runtime_enable() sashiko complained about early usage of the device while probe isn't completed. This can be mitigated by delaying the pm_runtime_enable() into the removal path instead doing it early. This ensures that in an error case the device is removed (and imx_mu_shutdown()) before pm_runtime_disable() so we don't have to do this manually. For the order to work, lets move devm_mbox_controller_register() until after the pm-runtime part. So the reverse order will be mbox-controller removal followed by disabling pm runtime. Use devm_pm_runtime_enable(), remove manual pm_runtime_disable() invocations and move the pm_runtime handling in probe before devm_mbox_controller_register(). | ||||
| CVE-2026-83871 | 1 Microsoft | 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more | 2026-10-25 | 7 High |
| Heap-based buffer overflow in OpenSSH for Windows allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-85920 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-25 | 7 High |
| Time-of-check time-of-use (toctou) race condition in Windows BitLocker allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-69935 | 1 Microsoft | 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more | 2026-10-25 | 7 High |
| Use after free in Windows Storage allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-84018 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-25 | 7 High |
| Use after free in Windows Print Spooler Components allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-85329 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-24 | 7 High |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Microsoft Account allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-69931 | 1 Microsoft | 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more | 2026-10-24 | 7 High |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Storage allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-98899 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: mark the rcu locked areas properly When we bump the uref counter, there's no need to keep the rcu lock because the referred hash table can't disappear. Also, from the same reason in mtype_gc we need the rcu lock and not a spinlock. | ||||
| CVE-2026-98864 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Wait for SCX_OPSS_DISPATCHING before reenqueueing a task ebf1ccff79c4 ("sched_ext: Fix ops.dequeue() semantics") moved the final ops_state store in scx_dispatch_enqueue() after the DSQ unlock so that the custody update and ops.dequeue() precede it. A task can thus be found on a DSQ while still SCX_OPSS_DISPATCHING. The dequeue and core-sched pick paths wait for the state to clear in ops_dequeue() but the reenqueue paths don't. A reenqueue in that window runs ops.enqueue() and sets SCX_OPSS_QUEUED before the dispatch has completed. The dispatcher's final store then overwrites it with SCX_OPSS_NONE and finish_dispatch() drops every later dispatch of the task. Wait for SCX_OPSS_DISPATCHING to clear before dequeueing a task for reenqueue, the same way ops_dequeue() does. | ||||
| CVE-2026-98465 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Serialize IMSIC attributes with vCPU migration KVM device ioctls are not serialized against KVM_RUN. As a result, kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of an IMSIC VS-file before a concurrent vCPU migration releases it. The HGEI can then be allocated to another vCPU before imsic_vsfile_rw() uses the stale tuple. A GET or SET attribute may consequently access the new owner's interrupt file. Serialize the entire IMSIC attribute operation with the target vCPU mutex. This prevents the VS-file from being migrated and recycled until the attribute access completes. Acquire the mutex killably so that the device ioctl remains interruptible while waiting for KVM_RUN to finish. | ||||
| CVE-2026-98792 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: generalize pending status bit Rename NF_FLOW_HW_PENDING to NF_FLOW_PENDING and use it to inhibit the flowtable GC worker until pending hw offload work has been completed. Apparently, nf_flow_offload_stats() can schedule work to retrieve stats while the flow is being removed by GC. And this bit can also be used in a follow up patch to disable GC until the flow has been fully added in both directions. Revert the reordering done in commit d644b23afe1e ("netfilter: flowtable: publish HW_DEAD after worker is done") to prevent a race between GC and hw offload handler. | ||||
| CVE-2026-78118 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | 7 High |
| The kernel helper z_waitq_head() (kernel/include/wait_q.h) reads the head of a thread wait queue, but on SMP systems it was called from several places without holding the scheduler spinlock _sched_spinlock that serializes wait-queue mutation. The consequential call site is z_timer_expiration_handler() in kernel/timer.c, which held only the timer subsystem lock timer_lock while reading timer->wait_q and then unpending, setting the return value of, and readying the thread it obtained. halt_thread() in kernel/sched.c removes an aborted thread from its wait queue while holding only _sched_spinlock, so the two paths are not mutually exclusive. When the last waiter is removed on another CPU inside that window, sys_dlist_peek_head() can return the list sentinel — a pointer into the k_timer object itself — typed as a struct k_thread * (with CONFIG_WAITQ_SCALABLE, rb_get_min() can return an arbitrary node of a tree being restructured), or it can return a pointer to a thread that has already been unpended and, for dynamically allocated threads, freed. The handler then calls unpend_thread_no_timeout(), which performs a sys_dlist_remove() through pointers read from that object, and arch_thread_return_value_set(), which writes unconditionally through the pointer. The result is out-of-bounds and use-after-free writes in supervisor context, plus scheduler state corruption; a milder outcome is a thread that has re-pended elsewhere being woken with a success return value from an unrelated blocking call. All of the primitives needed to drive the interleaving — k_timer_start(), k_timer_status_sync(), k_thread_create() and k_thread_abort() — are system calls, so with CONFIG_USERSPACE enabled an unprivileged user-mode thread can attempt the race against kernel-owned data. Exploitation requires a multi-CPU build (CONFIG_MP_MAX_NUM_CPUS greater than one; the affected region is a no-op on uniprocessor targets), local code execution, and winning a narrow timing window, so the practical outcome is most often a kernel crash rather than controlled corruption. The fix splits the helper into z_waitq_head_locked() for callers that already hold the scheduler spinlock and a z_waitq_head() that acquires it, and brings the timer expiration handler's head read, unpend and ready under a single LOCK_SCHED_SPINLOCK region. | ||||
| CVE-2026-78117 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | 4.2 Medium |
| The Infineon PSOC 6 BLESS HCI driver in drivers/bluetooth/hci/hci_infineon_psoc6_bless.c stored the outgoing HCI packet descriptor in a file-scope variable, static cy_stc_ble_hci_tx_packet_info_t hci_tx_pkt. psoc6_bless_send() cleared and populated that descriptor's packetType, dataLength and data fields before acquiring psoc6_bless_operation_sem, so the driver's serialising semaphore protected only the call into Cy_BLE_SoftHciSendAppPkt() and not the shared state that call reads. The Bluetooth host does not guarantee a single HCI sender. Most transmissions are funnelled through the cooperative TX-processor work queue, but bt_hci_cmd_send() deliberately bypasses bt_dev.cmd_tx_queue for BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS and calls bt_send() directly from the caller's thread; that caller is bt_hci_host_num_completed_packets(), the acl_in_pool destroy callback, which runs on whichever thread drops the last reference to a received ACL buffer. CONFIG_BT_HCI_ACL_FLOW_CONTROL defaults to y on this driver's boards, and an application that returns -EINPROGRESS from its L2CAP recv callback and later calls bt_l2cap_chan_recv_complete() performs that unref from its own preemptible thread. A remote peer that generates Bluetooth traffic concurrently with the device's own transmissions raises the collision rate. When two senders interleave, the semaphore holder can hand the controller a descriptor whose dataLength comes from one net_buf and whose data pointer comes from another — or one whose buffer has already been returned to its pool. The controller then copies and transmits up to a full HCI/ACL payload starting at a shorter or recycled buffer, disclosing adjacent RAM contents to the connected peer; other interleavings duplicate one HCI packet and silently drop another, disrupting the link. The driver only reads through the shared descriptor, so no memory corruption or write primitive results, and the disclosed bytes are not attacker-chosen. The fix makes the descriptor a local variable in psoc6_bless_send(), removing the shared state; Cy_BLE_SoftHciSendAppPkt() copies the packet before returning, so it need not outlive the call. | ||||
| CVE-2026-99048 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix napi_disable deadlock when attempting to disable XSK pools When disabling XSK pools, GVE calls the unlocked versions of napi_disable and napi_enable. However, the netdev lock has already been acquired before ndo_bpf is called because GVE supports queue management ops. Calling the unlocked versions of napi_disable/enable results in a deadlock when attempting to disable XSK pools, as the thread attempts to re-acquire a lock it already holds. Update the NAPI calls to use the locked versions. This issue was found in production. | ||||
| CVE-2026-96853 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-23 | 4.7 Medium |
| Time-of-check time-of-use (toctou) race condition in Windows Win32 Kernel Subsystem allows an authorized attacker to disclose information locally. | ||||