| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The RSA-PSK ClientKeyExchange handler in gnutls before 3.8.14 does not return after detecting a memory allocation failure when copying the PSK username, which allows remote attackers to cause a denial of service for a peer under heap pressure. |
| The certificate authentication info handling in gnutls from 2.5.9 up to 3.8.13 does not reset the certificate count and list pointer when re-allocation of raw_certificate_list fails, which allows remote attackers to cause a denial of service for a peer under heap pressure. |
| A flaw was found in librest. The PKCE implementation for OAuth authorization uses the GRand function from the GLib API, a cryptographically insecure pseudo-random number generator. Because the generated "code verifier" lacks sufficient cryptographic entropy, a malicious actor can reverse-engineer the pseudo-random number generator (PRNG) seed to predict or reconstruct the code verifier string, allowing an attacker to bypass PKCE protections and successfully impersonate the client during the OAuth 2.0 authorization flow. |
| Due to a Debian-specific patch, the directory used to share data between the
LightDM and the users logging in was writable by the lightdm user of the
unprivileged greeter process. A process running under the lightdm identity
could leverage write access to that directory to force the LightDM process
(running as root) to change ownership and permissions on other root-owned
directories and escalate privileges from the lightdm user to root. |
| When NGINX Plus or NGINX Open Source is configured to use HTTP/2 for client connections and proxy client requests to a backend, a specially crafted request can result in use-after-free in the worker process, if this process is running low on worker_connections. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or may allow a code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When NGINX Plus or NGINX Open Source is configured to use the ngx_stream_ssl_module module with dynamic certificate loading and the ngx_stream_proxy_module module with the proxy_protocol v2 directive, an abbreviated SSL handshake can cause a worker process to terminate.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system. This is a data plane vulnerability only; there is no control plane exposure.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A vulnerability was found in elunez eladmin up to 2.7. This affects the function SqlUtils.batchExecute of the file /api/database/upload of the component Database Maintenance Module. The manipulation results in sql injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| An incorrect implementation of authentication algorithm vulnerability in the SSO API in Synology DiskStation Manager (DSM) before 7.2.2-72806-5 and 7.3.1-86003-1 (7.2.1-69057 is not affected) allows remote attackers to read or write arbitrary files and conduct denial-of-service attacks with prior knowledge of the distinguished name (DN). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Unconditionally reset MMU context when emulating INIT
Force an MMU reset when emulating an INIT even if paging was already
disabled, as the MMU page role includes guest_mode (L2), i.e. an INIT while
L2 is running with CR0.PG=0 will result in KVM running L1 with a stale MMU
context.
Alternatively, the reset could be scoped strictly to paging being enabled
or L2 being active, but SMM is also encoded in the page role. Even though
it _should_ be impossible for the vCPU to be INIT'd while SMM is active,
there's zero value in not handling SMM. At that point, the only scenario
where KVM _doesn't_ need to reset the MMU context is on an INIT with the
vCPU running in Real Mode or Unpaged Protect Mode, and while INIT in those
modes is somewhat common, it's far from a hot path and re-initializing the
MMU is not expensive, especially when the role isn't changing (KVM elides
most of the re-configuration in that case).
Note, like the Fixes commit, this bug only affects nested SVM as INIT is an
unconditional intercept on VMX, i.e. it's impossible to emulate INIT while
L2 is active.
Temporarily keep the guest TLB flush when CR0.PG is being cleared even
though it is fully redundant with the flush that is emitted on all INIT
events (KVM itself only does RESET when a vCPU is being created, i.e. when
CR0.PG must be '0'). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: fix race condition when accessing stale stack pointer
The driver uses hidpp->send_receive_buf to point to a stack-allocated
buffer in the synchronous command path (__do_hidpp_send_message_sync).
However, this pointer is not cleared when the function returns.
If an event is processed (e.g. by a different thread) while the
send_mutex is held by a new command, but before that command has
updated send_receive_buf, the handler (hidpp_raw_hidpp_event) will
observe that the mutex is locked and dereference the stale pointer.
This results in an out-of-bounds access on a different thread's kernel
stack (or a NULL pointer dereference on the very first command).
Fix this by:
1. Clearing hidpp->send_receive_buf to NULL before releasing the mutex
in the synchronous command path.
2. Moving the assignment of the local 'question' and 'answer' pointers
inside the mutex_is_locked() block in the handler, and adding
a NULL check before dereferencing. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hwdep: Serialize DSP load requests
The check of the loaded DSP indices and the call of the driver's
dsp_load callback in snd_hwdep_dsp_load() are not serialized. A hwdep
file descriptor can be shared among threads, or inherited across fork,
so two SNDRV_HWDEP_IOCTL_DSP_LOAD requests for the same index can both
observe the index as unloaded and enter the driver's callback
concurrently, even though the device itself is opened exclusively.
This breaks the assumption behind hw->dsp_loaded that a firmware index
is loaded only once. For example, snd-usb-usx2y hits
WARN_ON(usx2y->as04.buffer) in usx2y_async_seq04_init() and may
allocate the US-428 sequence URBs twice.
Serialize the check, the callback invocation and the bookkeeping with a
per-hwdep mutex, so that the second request returns -EBUSY. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: Fix use-after-free of MIDI URBs on file close
bcd2000_disconnect() calls snd_card_disconnect(), which only prevents
new opens, and then frees the MIDI URBs. A rawmidi file that was
already open can still be closed afterwards, and its close callback,
bcd2000_midi_output_close(), calls usb_kill_urb() on midi_out_urb.
The URB pointers are cleared on disconnect and their accesses are
serialized with midi_lock, but bcd2000_midi_output_close() reads
midi_out_urb without that lock. The check can therefore pass just
before the pointer is cleared, and usb_kill_urb() then runs on the URB
that has already been freed:
BUG: KASAN: slab-use-after-free in usb_kill_urb+0x74/0x80
Read of size 8 at addr ffff8880078e7d40
usb_kill_urb
bcd2000_midi_output_close
close_substream
rawmidi_release_priv
snd_rawmidi_release
Allocated by: usb_alloc_urb <- bcd2000_init_midi <- bcd2000_probe
Freed by: usb_free_urb <- bcd2000_midi_free
<- bcd2000_disconnect
Take the lock in bcd2000_midi_output_close() and reference the URB with
usb_get_urb() before releasing it. The URB then stays valid until
usb_put_urb() after usb_kill_urb() has returned, even if a disconnect
frees it in the meantime. usb_kill_urb() itself cannot run under
midi_lock, as the completion handler takes the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: Refuse a retried DSP load after a failure
snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and
the interrupt URB when the FPGA firmware image with index 1 is loaded,
and then creates the ALSA devices. If usx2y_in04_init() or
usx2y_create_alsa_devices() fails, the URBs that were already set up
are left in place.
The core keeps the index unloaded when the callback fails, so user
space may issue the same request again. The second attempt then enters
usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still
allocated and trips WARN_ON(usx2y->as04.buffer) or
WARN_ON(usx2y->in04_urb).
The URBs cannot be released at this point: the card may already have
registered PCM devices that user space can still open, and the
disconnect handler accesses the URBs without holding the DSP lock.
Mark the chip as hung instead, so that a retried request is refused
with -ENODEV and the assertions keep their meaning. The URBs are
released by snd_usx2y_card_private_free() when the card is freed.
A failing usx2y_async_seq04_init() still releases its own URBs, so that
path remains retryable. |
| The Asset CleanUp: Page Speed Booster plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'comment' parameter in all versions up to, and including, 1.4.0.6 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The exploit succeeds even though wp_kses is applied on save, because the XSS is manufactured post-sanitization by the plugin's regex pass: kses-permitted tags such as <a title> and <code> carry the attacker's marker and terminator strings intact into the rendered HTML buffer, where the plugin's own replacement then corrupts the document structure. |
| A vulnerability in Microsoft Compiled HTML Help (CHM) file scanning of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to a logic error when scanning the CHM file and following the internal file pointers. An attacker could exploit this vulnerability by sending a crafted CHM file for scanning. A successful exploit could allow the attacker to cause the ClamAV decode process to terminate due to an infinite loop, resulting in a DoS condition on the affected software. |
| A vulnerability in the InstallShield file parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to incomplete error checking when the InstallShield File Parser is performing a scan. An attacker could exploit this vulnerability by sending a crafted InstallShield file to be scanned. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate due to an infinite loop, resulting in a DoS condition on the affected software. |
| Wavelog is web-based amateur radio logging software. Prior to 2.5, the callsign parameter accepted by POST /oqrs/search_log in application/controllers/Oqrs.php search_log() reaches application/models/Oqrs_model.php search_log(), where it is concatenated directly into a raw SQL WHERE clause without parameter binding. An unauthenticated remote attacker can use UNION-based SQL injection to read arbitrary application database records, including account data, password hashes, API keys, station credentials, reset tokens, QSO data, and station metadata. Disclosure of password reset tokens can be combined with the forgot_password workflow to take over accounts, including administrator accounts. This issue is fixed in version 2.5. |
| Music Assistant is an open-source media library manager that integrates streaming services with connected speakers. Prior to 2.8.0, parse_arguments() passes the caller-controlled return_type parameter for config/core/get_value, config/providers/get_value, and config/players/get_value to parse_value() and Python eval() when resolving type parameters in music_assistant/helpers/api.py. Any authenticated user, regardless of role, can reach these commands through the WebSocket /ws endpoint or the REST JSON-RPC /api endpoint, causing arbitrary Python code to run with the Music Assistant server process privileges before command-handler validation, even if the request later fails. A default installation requires no special configuration, and compromise can expose secrets and configuration, alter library data, and control the application container. This issue is fixed in version 2.8.0. |
| Vtiger CRM through 8.4.0 contains a blind SQL injection vulnerability that allows authenticated non-administrative users to inject SQL through the k (does not contain) comparator in list view search_params. Attackers can send crafted search_params to the ListAjax getRecordsCount mode, breaking out of the unescaped NOT LIKE clause to extract database contents via boolean or time-based techniques. |
| Vtiger CRM through 8.4.0 contains a blind SQL injection vulnerability that allows authenticated low-privileged users to inject SQL via unescaped clientid values in the wsapp_map webservice operation. Attackers can register a sync application with wsapp_register, then send delete-mode entries with quoted clientid values processed by SyncServer.php to extract database contents including administrator access keys. |