| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS
For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off
for validation. However, variable offset ptr alu is not prohibited
for this ptr kind. So the variable offset is not checked.
The following prog is accepted:
func#0 @0
0: R1=ctx() R10=fp0
0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx()
1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys()
2: (b7) r8 = 1024 ; R8_w=1024
3: (37) r8 /= 1 ; R8_w=scalar()
4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0,
smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400))
5: (0f) r7 += r8
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024
mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1
mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024
6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off
=(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024,
var_off=(0x0; 0x400))
6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar()
7: (95) exit
This prog loads flow_keys to r7, and adds the variable offset r8
to r7, and finally causes out-of-bounds access:
BUG: unable to handle page fault for address: ffffc90014c80038
[...]
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline]
__bpf_prog_run include/linux/filter.h:651 [inline]
bpf_prog_run include/linux/filter.h:658 [inline]
bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline]
bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991
bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359
bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline]
__sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475
__do_sys_bpf kernel/bpf/syscall.c:5561 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5559 [inline]
__x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fix this by rejecting ptr alu with variable offset on flow_keys.
Applying the patch rejects the program with "R7 pointer arithmetic
on flow_keys prohibited". |
| In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: Increase weight to u16
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: VMAP_STACK overflow detection thread-safe
commit 31da94c25aea ("riscv: add VMAP_STACK overflow detection") added
support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to
`shadow_stack` temporarily before switching finally to per-cpu
`overflow_stack`.
If two CPUs/harts are racing and end up in over flowing kernel stack, one
or both will end up corrupting each other state because `shadow_stack` is
not per-cpu. This patch optimizes per-cpu overflow stack switch by
directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`.
Following are the changes in this patch
- Defines an asm macro to obtain per-cpu symbols in destination
register.
- In entry.S, when overflow is detected, per-cpu overflow stack is
located using per-cpu asm macro. Computing per-cpu symbol requires
a temporary register. x31 is saved away into CSR_SCRATCH
(CSR_SCRATCH is anyways zero since we're in kernel).
Please see Links for additional relevant disccussion and alternative
solution.
Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT`
Kernel crash log below
Insufficient stack space to handle exception!/debug/provoke-crash/DIRECT
Task stack: [0xff20000010a98000..0xff20000010a9c000]
Overflow stack: [0xff600001f7d98370..0xff600001f7d99370]
CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34
Hardware name: riscv-virtio,qemu (DT)
epc : __memset+0x60/0xfc
ra : recursive_loop+0x48/0xc6 [lkdtm]
epc : ffffffff808de0e4 ra : ffffffff0163a752 sp : ff20000010a97e80
gp : ffffffff815c0330 tp : ff600000820ea280 t0 : ff20000010a97e88
t1 : 000000000000002e t2 : 3233206874706564 s0 : ff20000010a982b0
s1 : 0000000000000012 a0 : ff20000010a97e88 a1 : 0000000000000000
a2 : 0000000000000400 a3 : ff20000010a98288 a4 : 0000000000000000
a5 : 0000000000000000 a6 : fffffffffffe43f0 a7 : 00007fffffffffff
s2 : ff20000010a97e88 s3 : ffffffff01644680 s4 : ff20000010a9be90
s5 : ff600000842ba6c0 s6 : 00aaaaaac29e42b0 s7 : 00fffffff0aa3684
s8 : 00aaaaaac2978040 s9 : 0000000000000065 s10: 00ffffff8a7cad10
s11: 00ffffff8a76a4e0 t3 : ffffffff815dbaf4 t4 : ffffffff815dbaf4
t5 : ffffffff815dbab8 t6 : ff20000010a9bb48
status: 0000000200000120 badaddr: ff20000010a97e88 cause: 000000000000000f
Kernel panic - not syncing: Kernel stack overflow
CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80006754>] dump_backtrace+0x30/0x38
[<ffffffff808de798>] show_stack+0x40/0x4c
[<ffffffff808ea2a8>] dump_stack_lvl+0x44/0x5c
[<ffffffff808ea2d8>] dump_stack+0x18/0x20
[<ffffffff808dec06>] panic+0x126/0x2fe
[<ffffffff800065ea>] walk_stackframe+0x0/0xf0
[<ffffffff0163a752>] recursive_loop+0x48/0xc6 [lkdtm]
SMP: stopping secondary CPUs
---[ end Kernel panic - not syncing: Kernel stack overflow ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
Adding a reserved memory region for the framebuffer memory
(the splash memory region set up by the bootloader).
It fixes a kernel panic (arm-smmu: Unhandled context fault
at this particular memory region) reported on DB845c running
v5.10.y. |
| Enabling `CURLOPT_CRLF` causes curl to advertise the raw input byte count in
the `IMAP APPEND {N}` literal while transmitting line-ending expanded data.
The server reads only $N$ bytes for the payload, causing the remaining
overflow bytes to be interpreted and executed as pipelined IMAP commands
within the authenticated session. |
| A flaw was found in Ansible Operator Plugins. A low-privileged Kubernetes user can exploit a Jinja2 template injection vulnerability by crafting malicious custom resource (CR) specification values. These values are processed by Ansible without proper sanitization, allowing embedded Jinja2 expressions to be executed within the operator pod. This can lead to arbitrary code execution and privilege escalation, granting the attacker control over the operator's service account with cluster-wide permissions. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pai: Handle multiple PMU stop callback invocations
Handle the following scenario:
The kernel protects itself against a very high sampling load and
throttles the sampling using:
perf_event_throttle() --> PMU->stop()
Shortly later the scheduler may terminate the task and removes it from the
CPU. It again calls
PMU->stop()
which results in two invocations of PMU->stop() called back to back.
Protect against this and check the PERF_HES_STOPPED bit on function
entry. If it is already set return.
Clear bit PERF_HES_STOPPED in PMU->start().
Prohibit ioctl(fd, PERF_EVENT_IOC_PERIOD, ...) call for this event.
It sets perf_event::event_limit to a positive value and causes
perf_event_overflow() to invoke pai_stop() call back function when
perf_event::event_limit hits zero. This is not supported because the
sample events CRYPTO_ALL and NNPA_ALL are only taken at schedule out
of a task.
Use list_for_each_entry_safe() for safe iteration over syswide_list
in pai_have_samples(). |
| SQLite before 3.53.2 contains an out-of-bounds read vulnerability in the FTS5 full-text search extension that allows attackers to crash the process by supplying a crafted database with a malformed FTS5 leaf page. Attackers can set an oversized term length in the leaf page so that fts5LeafSeek() reads past the end of the page buffer while comparing terms during an FTS5 MATCH query, in applications compiled with SQLITE_ENABLE_FTS5. |
| libosmocore through 1.14.1 contains out-of-bounds reads in the GSM 04.80 supplementary-service component parsers in src/gsm/gsm0480.c. This allows a remote attacker to obtain sensitive information. |
| A stack-based buffer overflow vulnerability in Fortinet FortiOS 7.4.0 through 7.4.1, FortiOS 7.2 all versions, FortiOS 7.0 all versions, FortiOS 6.4 all versions, FortiPAM 1.8.0 through 1.8.2, FortiPAM 1.7 all versions, FortiPAM 1.6 all versions, FortiPAM 1.5 all versions, FortiPAM 1.4 all versions, FortiPAM 1.3 all versions, FortiPAM 1.2 all versions, FortiPAM 1.1 all versions, FortiPAM 1.0 all versions, FortiProxy 7.4.0 through 7.4.13, FortiProxy 7.2 all versions may allow a privileged authenticated attacker who can bypass stack protection and ASLR to execute arbitrary code or commands via crafted HTTP requests. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS
frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in
the generic FC transport. This is not a local userspace or IP network
path; the attacker must be able to inject fabric traffic, for example as
a compromised switch or fabric controller, or as a same-zone N_Port on a
fabric that permits source spoofing.
The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop
counter against the 32-bit on-wire pname_count field, and did not bound
pname_count by the descriptor body already validated by the TLV walker.
A pname_count of 256 therefore wraps the counter and keeps the loop
condition true indefinitely.
Factor the shared pname_list[] walk into one helper, widen the counter
to u32, and clamp pname_count against the entries that fit in the
descriptor body before iterating. |
| An Improper Validation of Specified Quantity in Input vulnerability in rpd of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent OSPF peer to disclose rpd memory or cause a rpd crash via a malformed OSPF packets. |
| lwIP 2.0.0 through 2.2.1 built with the SNMP agent contains an out-of-bounds read vulnerability in snmp_pbuf_stream_writeto() that bounds copies by pbuf->len instead of remaining bytes. Remote unauthenticated attackers knowing the read community can send fragmented SNMP requests to receive adjacent receive-buffer or pool memory echoed in responses. |
| Cpanel::JSON::XS versions from 4.33 before 4.80 for Perl miss duplicate non-ASCII bare keys, allowing type confusion under dupkeys_as_arrayref in decode_hv.
With allow_barekey, which relaxed enables, a bare key containing a non-ASCII byte is stored as UTF-8 but looked up as raw bytes, so a repeated key escapes the duplicate-key check and replaces the earlier value.
From 4.41, under dupkeys_as_arrayref, a bare repeat replaces the array that collects a key's values with a plain value, and the next quoted repeat pushes onto that value as if it were an array. A JSON integer there is dereferenced as a pointer.
Untrusted JSON decoded with relaxed and dupkeys_as_arrayref can crash the process or dereference an address chosen by a JSON number. |
| Wasmtime 46.0.0 before 48.0.6 and 49.0.0 before 49.0.3 contains a denial of service vulnerability that allows malicious Wasm modules to panic the host because the may_leave flag is not cleared during realloc. Attackers can call into the host from realloc while lowering stream or future results, such as cancelling the active read or re-waiting a waitable-set, crashing the host. |
| Incorrect boundary conditions in the SVG component. This vulnerability was fixed in Firefox 158.0.1 and Thunderbird 158.0.1. |
| Cpanel::JSON::XS versions from 4.33 before 4.80 for Perl accept malformed UTF-8 in bare hash keys under allow_barekey in decode_hv.
With utf8 and allow_barekey, which relaxed enables, a quoted key is validated as UTF-8 but a bare key's bytes are stored as a UTF-8 flagged string without any check. Malformed UTF-8, control bytes and backslashes reach the decoded hash, while malformed UTF-8 and control bytes in a quoted key or a value are rejected.
Later operations on the key, including lc, uc or encoding the hash again, die with a malformed UTF-8 error. |
| Helm through 4.2.3, fixed in commit ba6c9a2, contains a denial of service vulnerability in the Files.Lines template helper in pkg/engine/files.go that allows attackers to trigger an index out of range panic by including zero-length byte slices in chart files. Attackers can include empty files in Helm charts to cause deterministic render failures across template, install, upgrade, lint, and SDK Engine.Render operations. |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.5, constructed string and indefinite-length ANY decoding repeatedly concatenates each fragment onto a growing bytes value. Attacker-controlled BER or CER data can use many constructed OCTET STRING or character-string fragments. DER rejects constructed OCTET STRING without a schema, but accepts its definite-length form when asn1Spec selects univ.OctetString; it also accepts constructed character strings such as UTF8String without a schema, even though those encodings are not valid DER. The separate indefinite-length ANY path is reachable in BER and CER when asn1Spec selects univ.Any; DER rejects indefinite lengths. OctetStringPayloadDecoder uses growing header concatenation and AnyPayloadDecoder.indefLenValueDecoder uses growing chunk concatenation, repeatedly copying an increasing prefix and causing quadratic work. A sufficiently fragmented value can occupy decoding workers and cause CPU exhaustion without confidentiality or integrity impact. This issue is fixed in version 0.6.5. |
| n8n before 2.41.4 and 2.42.x before 2.42.1 contains a prototype pollution vulnerability that allows low-privileged users to alter built-in object behaviour by saving workflows with specially named connection keys. Attackers can add keys such as __proto__ to workflow connections, which the periodic history compaction task processes, causing logins and writes to fail with server errors. |
