| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in SicommNet BASEC (SaaS Service) login page allows an unauthenticated remote attacker to Bypass Authentication and execute arbitrary SQL commands.This issue at least affects BASEC for the date of 14 Dec 2021 onwards. It is very likely that this vulnerability has been present in the solution before that.
The issue was fixed by SicommNet around 11pm on 16 april 2025 (Eastern Time) |
| A vulnerability, which was classified as critical, was found in LB-LINK BL-AC1900, BL-AC2100_AZ3, BL-AC3600, BL-AX1800, BL-AX5400P and BL-WR9000 up to 20250702. Affected is the function reboot/restore of the file /cgi-bin/lighttpd.cgi of the component Web Interface. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The iSherlock developed by Hgiga has an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server. This vulnerability has already been exploited. Please update immediately. |
| Johnson Controls Metasys component listed below have Improper Neutralization of Special Elements used in a Command (Command Injection) Vulnerability . Successful exploitation of this vulnerability could allow remote SQL execution This issue affects
* Metasys: Application and Data Server (ADS) installed with SQL Express deployed as part of the Metasys 14.1 and prior installation,
* Extended Application and Data Server (ADX) installed with SQL Express deployed as part of the Metasys 14.1 installation,
* LCS8500 or NAE8500 installed with SQL Express deployed as part of the Metasys installation Releases 12.0 through 14.1,
* System Configuration Tool (SCT) installed with SQL Express deployed as part of the SCT installation 17.1 and prior,
* Controller Configuration Tool (CCT) installed with SQL Express deployed as part of the CCT installation 17.0 and prior. |
| # Active Storage allowed transformation methods potentially unsafe
Active Storage attempts to prevent the use of potentially unsafe image
transformation methods and parameters by default.
The default allowed list contains three methods allow for the circumvention
of the safe defaults which enables potential command injection
vulnerabilities in cases where arbitrary user supplied input is accepted as
valid transformation methods or parameters.
Impact
------
This vulnerability impacts applications that use Active Storage with the image_processing processing gem in addition to mini_magick as the image processor.
Vulnerable code will look something similar to this:
```
<%= image_tag blob.variant(params[:t] => params[:v]) %>
```
Where the transformation method or its arguments are untrusted arbitrary input.
All users running an affected release should either upgrade or use one of the workarounds immediately.
Workarounds
-----------
Consuming user supplied input for image transformation methods or their parameters is unsupported behavior and should be considered dangerous.
Strict validation of user supplied methods and parameters should be performed
as well as having a strong [ImageMagick security
policy](https://imagemagick.org/script/security-policy.php) deployed.
Credits
-------
Thank you [lio346](https://hackerone.com/lio346) for reporting this! |
| General Industrial Controls Lynx+ Gateway
is missing critical authentication in the embedded web server which could allow an attacker to remotely reset the device. |
| An OS command injection vulnerability exists in various models of E-Series Linksys routers via the /tmUnblock.cgi and /hndUnblock.cgi endpoints over HTTP on port 8080. The CGI scripts improperly process user-supplied input passed to the ttcp_ip parameter without sanitization, allowing unauthenticated attackers to inject shell commands. This vulnerability was reported to be exploited in the wild by the "TheMoon" worm in 2014 to deploy a MIPS ELF payload, enabling arbitrary code execution on the router. Additionally, this vulnerability may affect other Linksys products to include, but not limited to, WAG/WAP/WES/WET/WRT-series router models and Wireless-N access points and routers. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC. |
| Improper Input Validation vulnerability in pbkdf2 allows Signature Spoofing by Improper Validation.This issue affects pbkdf2: <=3.1.2. |
| Improper Input Validation vulnerability in pbkdf2 allows Signature Spoofing by Improper Validation. This vulnerability is associated with program files lib/to-buffer.Js.
This issue affects pbkdf2: from 3.0.10 through 3.1.2. |
| Milvus is an open-source vector database built for generative AI applications. An unauthenticated attacker can exploit a vulnerability in versions prior to 2.4.24, 2.5.21, and 2.6.5 to bypass all authentication mechanisms in the Milvus Proxy component, gaining full administrative access to the Milvus cluster. This grants the attacker the ability to read, modify, or delete data, and to perform privileged administrative operations such as database or collection management. This issue has been fixed in Milvus 2.4.24, 2.5.21, and 2.6.5. If immediate upgrade is not possible, a temporary mitigation can be applied by removing the sourceID header from all incoming requests at the gateway, API gateway, or load balancer level before they reach the Milvus Proxy. This prevents attackers from exploiting the authentication bypass behavior. |
| A SQL injection vulnerability has been identified in DobryCMS. Improper neutralization of input provided by user into language functionality allows for SQL Injection attacks.
This issue affects older branches of this software. |
| dotCMS versions 24.03.22 and after, identified a Boolean-based blind SQLi vulnerability in the /api/v1/contenttype endpoint. This endpoint uses the sites query parameter, which accepts a comma-separated list of site identifiers or keys.
The vulnerability was triggered via the sites parameter, which was directly concatenated into a SQL query without proper sanitization.
Exploitation allowed an authenticated attacker with low privileges to extract data from database, perform privilege escalation, or trigger denial-of-service conditions.
The vulnerability was verified using tools such as SQLMap and confirmed to allow full database exfiltration and potential denial-of-service conditions via crafted payloads.
The vulnerability is fixed in the following versions of dotCMS stack: 25.08.14 / 25.07.10-1v2 LTS / 24.12.27v10 LTS / 24.04.24v21 LTS |
| Prebid Universal Creative (PUC) is a JavaScript API to render multiple formats. Npm users of PUC 1.17.3 or PUC latest were briefly affected by crypto-related malware. This includes the extremely popular jsdelivr hosting of this file. The maintainers of PUC unpublished version 1.17.3. Users should see Prebid.js 9 release notes for suggestions on moving off the deprecated workflow of using the PUC or pointing to a dynamic version of it. PUC users pointing to latest should transition to 1.17.2 as soon as possible to avoid similar attacks in the future. |
| Cypress Solutions CTM-200/CTM-ONE 1.3.6 contains hard-coded credentials vulnerability in Linux distribution that exposes root access. Attackers can exploit the static 'Chameleon' password to gain remote root access via Telnet or SSH on affected devices. |
| BYTEVALUE Intelligent Flow Control Router contains a command injection vulnerability via the /goform/webRead/open endpoint. The `path` parameter is not properly validated and is echoed into a shell context, allowing an attacker to inject and execute arbitrary shell commands on the device. Successful exploitation can lead to writing backdoors, privilege escalation on the host, and full compromise of the router and its management functions. VulnCheck has observed this vulnerability being targeted by the RondoDox botnet campaign. |
| SmartBI V8, V9, and V10 contain an unrestricted file upload vulnerability via the RMIServlet request handling logic. Under certain configurations or usage patterns, attackers can send specially crafted requests that cause the application to perform sensitive operations or execute arbitrary code on the host. The vendor released a fix in July 2023 to address the underlying flaw. VulnCheck has observed this vulnerability being exploited in the wild. |
| Ruijie RG-UAC Application Management Gateway contains a command injection vulnerability via the 'nmc_sync.php' interface. An unauthenticated attacker able to reach the affected endpoint can inject shell commands via crafted request data, causing the application to execute arbitrary commands on the host. Successful exploitation can yield full control of the application process and may lead to system-level access depending on the service privileges. VulnCheck has observed this vulnerability being targeted by the RondoDox botnet campaign. |
| KUNBUS PiCtory versions 2.5.0 through 2.11.1 have an authentication bypass vulnerability where a remote attacker can bypass authentication to get access due to a path traversal. |
| The WordPress plugin is-human <= v1.4.2 contains an eval injection vulnerability in /is-human/engine.php that can be triggered via the 'type' parameter when the 'action' parameter is set to 'log-reset'. The root cause is unsafe use of eval() on user-controlled input, which can lead to execution of attacker-supplied PHP and OS commands. This may result in arbitrary code execution as the webserver user, site compromise, or data exfiltration. The is-human plugin was made defunct in June 2008 and is no longer available for download. This vulnerability was exploited in the wild in March 2012. |
| Improper authentication handling was identified in a set of HTTP POST requests affecting the following product families:
* Digi PortServer TS - prior to and including 82000747_AA, build date 06/17/2022
* Digi One SP/Digi One SP IA/Digi One IA - prior to and including 82000774_Z, build date 10/19/2020
* Digi One IAP – prior to and including 82000770 Z, build date 10/19/2020
A specially crafted POST request to the device’s web interface may allow an unauthenticated attacker to modify configuration settings. |
