Export limit exceeded: 420086 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (5188 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-23293 | 1 Nvidia | 1 License System | 2026-04-15 | 8.7 High |
| NVIDIA Delegated Licensing Service for all appliance platforms contains a vulnerability where an User/Attacker may cause an authorized action. A successful exploit of this vulnerability may lead to information disclosure. | ||||
| CVE-2025-15346 | 1 Wolfssl | 1 Wolfssl | 2026-04-15 | N/A |
| A vulnerability in the handling of verify_mode = CERT_REQUIRED in the wolfssl Python package (wolfssl-py) causes client certificate requirements to not be fully enforced. Because the WOLFSSL_VERIFY_FAIL_IF_NO_PEER_CERT flag was not included, the behavior effectively matched CERT_OPTIONAL: a peer certificate was verified if presented, but connections were incorrectly authenticated when no client certificate was provided. This results in improper authentication, allowing attackers to bypass mutual TLS (mTLS) client authentication by omitting a client certificate during the TLS handshake. The issue affects versions up to and including 5.8.2. | ||||
| CVE-2014-125124 | 3 Artica, Pandora Fms, Pandorafms | 4 Pandora Fms, Pandora Fms, Artica Pandora Fms and 1 more | 2026-04-15 | N/A |
| An unauthenticated remote command execution vulnerability exists in Pandora FMS versions up to and including 5.0RC1 via the Anyterm web interface, which listens on TCP port 8023. The anyterm-module endpoint accepts unsanitized user input via the p parameter and directly injects it into a shell command, allowing arbitrary command execution as the pandora user. In certain versions (notably 4.1 and 5.0RC1), the pandora user can elevate privileges to root without a password using a chain involving the artica user account. This account is typically installed without a password and is configured to run sudo without authentication. Therefore, full system compromise is possible without any credentials. | ||||
| CVE-2025-52916 | 1 Yealink | 1 Ymcs | 2026-04-15 | 2.2 Low |
| Yealink RPS before 2025-06-04 lacks SN verification attempt limits, enabling brute-force enumeration (last five digits). | ||||
| CVE-2025-46414 | 1 Eg4 Electronics | 7 Eg4 12000xp, Eg4 12kpv, Eg4 18kpv and 4 more | 2026-04-15 | 8.1 High |
| The affected product does not limit the number of attempts for inputting the correct PIN for a registered product, which may allow an attacker to gain unauthorized access using brute-force methods if they possess a valid device serial number. The API provides clear feedback when the correct PIN is entered. This vulnerability was patched in a server-side update on April 6, 2025. | ||||
| CVE-2025-47272 | 2026-04-15 | 5.5 Medium | ||
| The CE Phoenix eCommerce platform, starting in version 1.0.9.7 and prior to version 1.1.0.3, allowed logged-in users to delete their accounts without requiring password re-authentication. An attacker with temporary access to an authenticated session (e.g., on a shared/public machine) could permanently delete the user’s account without knowledge of the password. This bypass of re-authentication puts users at risk of account loss and data disruption. Version 1.1.0.3 contains a patch for the issue. | ||||
| CVE-2024-3219 | 1 Python Software Foundation | 1 Cpython | 2026-04-15 | N/A |
| The “socket” module provides a pure-Python fallback to the socket.socketpair() function for platforms that don’t support AF_UNIX, such as Windows. This pure-Python implementation uses AF_INET or AF_INET6 to create a local connected pair of sockets. The connection between the two sockets was not verified before passing the two sockets back to the user, which leaves the server socket vulnerable to a connection race from a malicious local peer. Platforms that support AF_UNIX such as Linux and macOS are not affected by this vulnerability. Versions prior to CPython 3.5 are not affected due to the vulnerable API not being included. | ||||
| CVE-2025-53534 | 1 Ratpanel Project | 1 Ratpanel | 2026-04-15 | N/A |
| RatPanel is a server operation and maintenance management panel. In versions 2.3.19 through 2.5.5, when an attacker obtains the backend login path of RatPanel (including but not limited to weak default paths, brute-force cracking, etc.), they can execute system commands or take over hosts managed by the panel without logging in. In addition to this remote code execution (RCE) vulnerability, the flawed code also leads to unauthorized access. RatPanel uses the CleanPath middleware provided by github.com/go-chi/chi package to clean URLs, but but the middleware does not process r.URL.Path, which can cause the paths to be misinterpreted. This is fixed in version 2.5.6. | ||||
| CVE-2024-42017 | 2026-04-15 | 10 Critical | ||
| An issue was discovered in Atos Eviden iCare 2.7.1 through 2.7.11. The application exposes a web interface locally. In the worst-case scenario, if the application is remotely accessible, it allows an attacker to execute arbitrary commands with system privilege on the endpoint hosting the application, without any authentication. | ||||
| CVE-2021-47710 | 1 Commax | 1 Smart Home System | 2026-04-15 | N/A |
| COMMAX Smart Home System is a smart IoT home solution that allows an unauthenticated attacker to disclose RTSP credentials in plain-text by exploiting the /overview.asp endpoint. Attackers can access sensitive information, including login credentials and DVR settings, by submitting a GET request to this endpoint. | ||||
| CVE-2024-12054 | 2026-04-15 | 5.4 Medium | ||
| ZF Roll Stability Support Plus (RSSPlus) is vulnerable to an authentication bypass vulnerability targeting deterministic RSSPlus SecurityAccess service seeds, which may allow an attacker to remotely (proximal/adjacent with RF equipment or via pivot from J2497 telematics devices) call diagnostic functions intended for workshop or repair scenarios. This can impact system availability, potentially degrading performance or erasing software, however the vehicle remains in a safe vehicle state. | ||||
| CVE-2025-52551 | 2026-04-15 | N/A | ||
| E2 Facility Management Systems use a proprietary protocol that allows for unauthenticated file operations on any file in the file system. | ||||
| CVE-2024-2051 | 2026-04-15 | 9.8 Critical | ||
| CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could cause account takeover and unauthorized access to the system when an attacker conducts brute-force attacks against the login form. | ||||
| CVE-2024-12511 | 2026-04-15 | 7.6 High | ||
| With address book access, SMB/FTP settings could be modified, redirecting scans and possibly capturing credentials. This requires enabled scan functions and printer access. | ||||
| CVE-2024-49587 | 1 Palantir | 1 Gotham | 2026-04-15 | 9.1 Critical |
| Glutton V1 service endpoints were exposed without any authentication on Gotham stacks, this could have allowed users that did not have any permission to hit glutton backend directly and read/update/delete data. The affected service has been patched and automatically deployed to all Apollo-managed Gotham Instances | ||||
| CVE-2025-8450 | 1 Fortra | 2 Filecatalyst Direct, Filecatalyst Workflow | 2026-04-15 | 8.2 High |
| Improper Access Control issue in the Workflow component of Fortra's FileCatalyst allows unauthenticated users to upload arbitrary files via the order forms page. | ||||
| CVE-2024-51362 | 1 Lsc Smart Connect | 1 Indoor Camera Firmware | 2026-04-15 | 6.5 Medium |
| The LSC Smart Connect Indoor IP Camera V7.6.32 is vulnerable to an information disclosure issue where live camera footage can be accessed through the RTSP protocol on port 8554 without requiring authentication. This allows unauthorized users with network access to view the camera's feed, potentially compromising user privacy and security. No credentials or special permissions are required, and access can be gained remotely over the network. | ||||
| CVE-2025-59097 | 1 Dormakaba | 1 Access Manager | 2026-04-15 | N/A |
| The exos 9300 application can be used to configure Access Managers (e.g. 92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps. This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication: - Re-configure Access Managers (e.g. remove alarming system requirements) - Freely re-configure the inputs and outputs - Open all connected doors permanently - Open all doors for a defined time interval - Change the admin password - and many more Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet. | ||||
| CVE-2024-39364 | 1 Advantech | 1 Adam-5630 | 2026-04-15 | 6.3 Medium |
| Advantech ADAM-5630 has built-in commands that can be executed without authenticating the user. These commands allow for restarting the operating system, rebooting the hardware, and stopping the execution. The commands can be sent to a simple HTTP request and are executed by the device automatically, without discrimination of origin or level of privileges of the user sending the commands. | ||||
| CVE-2024-22179 | 2026-04-15 | 7.5 High | ||
| The application is vulnerable to an unauthenticated parameter manipulation that allows an attacker to set the credentials to blank giving her access to the admin panel. Also vulnerable to account takeover and arbitrary password change. | ||||