Search

Search Results (430503 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99707 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: flush deferred unmaps before dropping a failed folio collapse_file() can fail its reference-count or dirty-folio check after unmapping with TTU_BATCH_FLUSH. Both paths put back the isolated folio, then unlock it and drop the lookup reference before reaching the common try_to_unmap_flush(). The page-cache reference does not keep the folio stable once the lock is released. Another collapse can replace and free it. With its PTEs already gone, that collapse cannot flush the first task's per-task TLB batch, and retract_page_tables() skips short or unaligned VMAs. A CPU can therefore retain a user translation to the freed folio. This has been reproduced with unprivileged MADV_COLLAPSE on a memfd. Flush at out_unlock while the lookup reference and folio lock are still held. The common flush continues to cover the accumulated pagelist on both success and rollback, preserving batching on successful collapses.
CVE-2026-99712 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Conditionally resched when restarting REP string emulation When restarting emulation, e.g. of a REP-prefixed string instruction, conditionally reschedule as emulating guest writes can be deceptively slow and expensive, e.g. when shadow paging is in use and each write can trigger write tracking. In a perfect world, restarting emulation (or not) would be less arbitrary, e.g. would honor not only host events (NEED_RESCHED, signals, etc.) but also guest events (e.g. by checking kvm_vcpu_has_events()). Unfortunately, as pointed out by Sashiko, pio_in_emulated()'s read-ahead logic is baked into the restart logic, as KVM relies on restarting emulation to drain the cache and avoid duplicate reads from the I/O port. I.e. re-entering the guest on kvm_vcpu_has_events() or __xfer_to_guest_mode_work_pending() would introduce architecturally-incorrect, guest-visible changes.
CVE-2026-99713 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Conditionally resched when retrying gPTE walk on A/D update failure Conditionally reschedule when retrying a guest PTE walk because the CMPXCHG to update A/D bits failed, e.g. because a different task/vCPU modified the relevant gPTEs. On kernels without involuntary preemption of some kind, a misbehaving guest can "capture" a pCPU effectively indefinitely and trigger soft lockups by continuously modifying its gPTEs such that the result of the walk is remains valid.
CVE-2026-17606 2026-11-20 6.5 Medium
A flaw was found in 7-Zip. An out-of-bounds read vulnerability in the ext filesystem disk-image handler can lead to a Denial of Service (DoS) through an application crash. An attacker can exploit this issue by convincing a user to open, list, or extract a specially crafted ext disk image, which triggers an invalid memory read past allocated buffer capacity due to improper validation of filesystem metadata.
CVE-2026-132231 1 Jetbrains 1 Teamcity 2026-11-20 9.9 Critical
In JetBrains TeamCity before 2026.1.3, 2025.11.7 remote code execution was possible via best-fit character mapping in Perforce settings
CVE-2026-132233 1 Jetbrains 1 Teamcity 2026-11-20 9.9 Critical
In JetBrains TeamCity before 2026.1.3, 2025.11.7 remote code execution was possible via build attribute injection
CVE-2026-132239 1 Jetbrains 1 Teamcity 2026-11-20 7.6 High
In JetBrains TeamCity before 2026.1.3, 2025.11.7 missing authorization in the Kubernetes integration allowed project viewers to use stored credentials
CVE-2026-132241 1 Jetbrains 1 Teamcity 2026-11-20 7.3 High
In JetBrains TeamCity before 2026.1.3, 2025.11.7 XXE in the .NET build steps auto-discovery was possible
CVE-2026-132769 1 Gpac 1 Gpac 2026-11-20 6.1 Medium
GPAC before 26.07.0 contains a type confusion vulnerability in xmt_parse_script_field() that allows attackers to trigger a heap out-of-bounds read via duplicate Script field names with conflicting types. Attackers can craft an XMT file that, when imported with MP4Box, causes gf_sg_vrml_mf_reset() to treat a single-value field as multi-value, crashing the application.
CVE-2026-132765 1 Gpac 1 Gpac 2026-11-20 6.6 Medium
GPAC MP4Box through 26.07.0 contains a use-after-free vulnerability in gf_node_try_destroy because Conditional node commands keep raw pointers to target nodes freed by gf_sg_reset(). Attackers can supply a crafted XMT scene processed with -info or -add to trigger heap use-after-free, crashing the process and corrupting heap memory.
CVE-2026-132761 1 Gpac 1 Gpac 2026-11-20 5.5 Medium
GPAC before 26.07.0 contains a use-after-free vulnerability in gf_node_try_destroy that allows attackers to crash MP4Box by supplying crafted XMT scene files. Commands created inside a PROTO scope keep a raw pointer to a freed prototype sub-scene graph, which is read during teardown, causing denial of service.
CVE-2026-132757 1 Gpac 1 Gpac 2026-11-20 5.5 Medium
GPAC before 26.07.0 contains a NULL pointer dereference vulnerability in DoWriteMeta() in src/isomedia/isom_store.c that allows attackers to crash MP4Box via crafted files. Attackers can supply an ISOBMFF file with a meta box containing an iloc entry but no dref box, crashing MP4Box during rewrite operations like -unhint.
CVE-2026-132858 1 Redhat 2 Enterprise Linux, Rhel Els 2026-11-20 7.8 High
A flaw was found in gdm. The CreateRemoteDisplay D-Bus method fails to perform proper authorization checks when initiating a remote display session. A local attacker with access to the login screen environment can invoke this method with an arbitrary username to bypass standard automatic login verification checks. This vulnerability allows the attacker to achieve privilege escalation and start an unauthorized session as any user on the system, including root.
CVE-2026-99454 1 Linux 2 Linux, Linux Kernel 2026-11-20 8.8 High
In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix protected RX frame validation in decrypt path The RX software decrypt path mishandles crafted protected frames from a malicious AP in two ways: 1) decryptor() never checks that a protected frame is long enough to hold the 802.11 header plus the per-cipher trailer. All of rtw_wep_decrypt(), rtw_tkip_decrypt() and rtw_aes_decrypt() compute length = hdr.len - hdrlen - iv_len; and act on the result, and recvframe_chkmic() similarly computes datalen = hdr.len - hdrlen - iv_len - icv_len - 8; for TKIP (the 8-byte Michael MIC is not accounted for in icv_len). A frame shorter than hdrlen + iv_len + icv_len (+ 8 for TKIP) underflows these unsigned subtractions, turning into a ~4 GiB iteration count in aes_decipher()/arc4_crypt()/rtw_seccalctkipmic() or a ~4 GiB crc32_le() length, causing out-of-bounds reads/writes of up to ~4 GiB starting from the rx skb. Reject such frames in decryptor() before touching the IV; this covers all three ciphers and the TKIP MIC check, and also keeps the unconditional iv[3] access within the frame. 2) validate_80211w_mgmt() keeps using the frame - two memcpys through the stale rx_data pointer and a pkt_len update - before checking whether decryptor() returned NULL. On decrypt failure (e.g. a unicast protected deauth/disassoc/action frame with a bad MIC, which this path always software-decrypts) the skb has already been freed, so this is a use-after-free read/write, and the caller's error path frees the frame a second time, drifting free_recvframe_cnt. Bail out immediately when decryptor() fails, freeing the temporary mgmt_DATA buffer first. Discovered by Atuin - Automated Vulnerability Discovery Engine.
CVE-2026-99455 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: serial: core: shut down initialized port on removal When a serial port configured as a console is opened and subsequently closed, tty_port_shutdown() skips invoking port->ops->shutdown() because port->console is true. As a result, tty_port_initialized() remains true and the port's interrupt handler stays registered in the irq subsystem. If the underlying device is later unbound or removed (e.g. via sysfs driver unbind or device hot-unplug), serial_core_remove_one_port() unregisters the console, frees uport->name via kfree(), and tears down the port without shutting it down or freeing its IRQ. Consequently, the irqaction descriptor remains registered in genirq with action->name pointing to freed memory. This triggers a use-after-free read whenever genirq accesses action->name, such as when reading /proc/interrupts: BUG: KASAN: slab-use-after-free in string+0x476/0x570 Call Trace: string+0x476/0x570 vsnprintf+0x422/0x1300 seq_printf+0x... show_interrupts+... Fix this by acquiring port->mutex in serial_core_remove_one_port() after console unregistration, clearing port->console under the mutex to prevent data races with concurrent tty_port_shutdown(), and invoking uart_shutdown(NULL, state) if the port remains initialized. This ensures that port->ops->shutdown() is called and the IRQ is freed before kfree(uport->name).
CVE-2026-129182 2 Php, Php Group 2 Php, Php 2026-11-20 8.1 High
Use-after-free via repopulation of last_fatal_error_backtrace global after shutdown. A fatal error raised while modified INI settings are restored during request shutdown can repopulate the stored fatal error backtrace after the executor has been cleaned up. The request memory is then freed, and a diagnostic emitted before executor initialization in a later request handled by the same PHP-FPM or mod_php worker can access the stale backtrace. The shutdown error requires per-path configuration of max_memory_limit, or of zlib.output_compression together with output_handler (which .user.ini can also set). The early diagnostic requires Apache per-directory configuration or, for PHP-FPM, a PHP_VALUE or PHP_ADMIN_VALUE parameter sent by the front end. This can cause memory corruption and worker crashes, and may allow remote code execution. This issue affects PHP versions 8.5.* before 8.5.13.
CVE-2026-99456 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: dc395x: sync the waiting_timer before freeing the host The waiting_timer callback re-arms itself and takes the host lock. adapter_uninit() currently stops it with timer_delete(), which does not wait for a callback already running on another CPU. The final scsi_host_put() that frees the host (and the host lock the callback dereferences) runs right after adapter_uninit(), so a concurrent or just re-armed callback can fire after the free, leaving a potential use-after-free window. Replace timer_delete() with timer_shutdown_sync() at the top of adapter_uninit(), before the host-lock section: the timer is dequeued, a running callback is waited for and rearming is blocked before the chip is halted, so it cannot fire at all once the adapter has ceased to function. Waiting outside the lock avoids the self-deadlock that would result from syncing a callback blocked on the lock we still hold. No shutdown is needed for selto_timer because it has no reachable armer or callback. This issue was found by an in-house static analysis tool.
CVE-2026-99457 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: sched: prevent scheduling deactivated qdiscs TAPRIO can schedule a deactivated qdisc after some_qdisc_is_busy() has reported it idle. Commit 47e8dbb6e763 ("net/sched: do not reset queues in graft operations") made graft deactivation skip queue reset, leaving TAPRIO's timer armed. A late callback schedules NET_TX softirq work, whose dequeue path can race the unlocked child-queue reset in taprio_reset(). The same skb can be queued for deferred freeing by RTNL and dequeued for transmission. In the reproducer, the TAP reader frees it before __rtnl_unlock() reads its next pointer. KASAN reports a slab-use-after-free in __rtnl_unlock+0xa3/0xd0, with a read of size 8 from the freed skb. Reject deactivated qdiscs in __netif_schedule(). Callers' RCU protection lets the existing grace period join earlier scheduling calls before the busy check. Restart nonempty transmit queues on reactivation so suppressed scheduling does not strand packets.
CVE-2026-99458 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: mtd: virt-concat: unlink discarded items before freeing mtd_virt_concat_destroy_items() frees each item without removing it from concat_node_list. list_for_each_entry_safe() protects the current traversal, but concat_node_list still points to the freed items afterward. The function also unwinds errors from mtd_virt_concat_node_create(). A later initialization can traverse a freed item in mtd_is_part_concat(), causing a use-after-free. Unlink each item before freeing it.
CVE-2026-99459 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mshv_vtl: detach poll waiter on POLLFREE MSHV_SET_POLL_FILE keeps a poll wait entry after the ioctl returns. A file reference does not always pin the registered waitqueue: signalfd_poll() uses current->sighand->signalfd_wqh, whose lifetime is tied to the task. signalfd_cleanup() sends POLLFREE before the sighand is freed. The MSHV callback currently leaves its entry linked, so __wake_up_pollfree() warns and a later replacement calls remove_wait_queue() through a stale wqh pointer. A source-equivalent KASAN run reproduced: BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave _raw_spin_lock_irqsave remove_wait_queue harness_ioctl [mshv_pollfree_harness] The object belonged to sighand_cache and had been released through slab_free_after_rcu_debug() after __cleanup_sighand(). On POLLFREE, unlink the entry under the provider waitqueue lock. Preserve the existing CPU cancellation before publishing a NULL wqh, since a NULL load lets a racing replacement reuse the persistent poll state. Use a matching acquire load under RCU when removing a normal registration. The callback takes no mutex and does not sleep, so the existing mutex-to-waitqueue-lock order is unchanged. An LLM assisted the source audit, fix development, and validation of this issue.