| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: mhz19b: reject oversized serial replies
mhz19b_receive_buf() appends each serdev chunk into the fixed
MHZ19B_CMD_SIZE receive buffer and advances buf_idx by len without
checking that the chunk fits in the remaining space. A large callback
can therefore overflow st->buf before the command path validates the
reply.
Reset the reply state before each command and reject oversized serial
replies before copying them into the fixed buffer. When an oversized
reply is detected, wake the waiter and report -EMSGSIZE instead of
overwriting st->buf. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: itg3200: fix i2c read into the wrong stack location
itg3200_read_all_channels() takes `__be16 *buf' as a parameter and
fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the
parameter (a pointer), `&buf' is the address of the local pointer
slot on the stack of itg3200_read_all_channels(), not the address
of the caller's scan buffer. The (char *) cast hides the type
mismatch.
i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16)
= 8 bytes into the parameter's stack slot, which is discarded when
the function returns. The caller's scan buffer in
itg3200_trigger_handler() is never written to, so
iio_push_to_buffers_with_timestamp() pushes uninitialised stack
contents to userspace via /dev/iio:deviceX every scan -- both a
functional bug (no actual gyroscope or temperature data is
delivered through the triggered buffer) and an information leak.
The non-buffered read_raw() path is unaffected: it goes through
itg3200_read_reg_s16() which uses `&out' on a local s16 value,
where that is correct.
Drop the spurious `&' so the i2c read writes into the caller's
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: xpad - fix out-of-bounds access for Share button
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: line-display: fix OOB read on zero-length message_store()
linedisp_display() unconditionally reads msg[count - 1] before
checking whether count is zero, so a write of zero bytes to the
message sysfs attribute hits msg[-1]:
write(fd, "", 0);
-> message_store(..., buf, count=0)
-> linedisp_display(linedisp, buf, count=0)
-> msg[count - 1] == '\n' ; OOB read
The kernfs write buffer for that store is a 1-byte allocation
(kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0),
so msg[-1] is a 1-byte read before the slab object. On a
KASAN-enabled kernel this trips an out-of-bounds report and
panics; on stock kernels it silently reads adjacent slab data
and, if that byte happens to be '\n', the following count--
wraps ssize_t 0 to -1 and is then passed to kmemdup_nul().
linedisp_display() is reached from the message_store() sysfs
callback (drivers/auxdisplay/line-display.c message attribute,
mode 0644) and from the in-tree initial-message setup with
count == -1, so the OOB path is only userspace-triggerable via
zero-byte writes; vfs_write() does not short-circuit on
count == 0 and kernfs_fop_write_iter() dispatches the store
callback regardless.
Guard the trailing-newline trim with a count check. The
existing if (!count) block then takes the clear-display path
unchanged.
Affects every auxdisplay driver that registers via
linedisp_register() / linedisp_attach(): ht16k33, max6959,
img-ascii-lcd, seg-led-gpio. |
| Improper restriction of rendered ui layers or frames in Microsoft Edge (Chromium-based) allows an unauthorized attacker to perform spoofing over a network. |
| Buffer over-read in Servicing Stack Updates allows an authorized attacker to disclose information locally. |
| Stack-based buffer overflow in Windows Client-Side Caching (CSC) Service allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
calipso: keep BIG TCP payload_len in calipso_skbuff_setattr()
calipso_skbuff_setattr() adjusts payload_len by the length of the
option it inserts or resizes:
payload = ntohs(ip6_hdr->payload_len);
ip6_hdr->payload_len = htons(payload + len_delta);
GRO can build BIG TCP packets larger than IPV6_MAXPLEN, and stores
payload_len == 0 for them; ipv6_payload_len() then falls back to
skb->len. For such a packet forwarded to a destination mapped to
CALIPSO, the code above writes len_delta (or 65536 + len_delta when
shrinking) into payload_len, and ipv6_payload_len() no longer falls
back to skb->len. nf_tables, conntrack and sch_cake rely on it.
The same arithmetic also wraps when a packet grows past IPV6_MAXPLEN,
and a BIG TCP packet that shrinks below IPV6_MAXPLEN should get its
real length back.
Set payload_len from the skb length with ipv6_set_payload_len(), which
stores 0 above IPV6_MAXPLEN and the real length otherwise, as
ipv6_gro_complete() does. The network header was just reset to
skb->data, so skb->len - sizeof(*ip6_hdr) is the payload length.
Tested on one kernel (arm64, QEMU) with SELinux permissive, a minimal
mdp-generated policy (network_peer_controls=1), "netlabelctl calipso
add pass doi:16" and a NetLabel mapping of fd00:2::/64 to CALIPSO
DOI 16. calipso_skbuff_setattr() was called through
netlbl_skbuff_setattr() from a test-only debugfs hook (not part of
this patch) adding a level-only label; payload_len after the call:
case before fix after fix real length
1000, unlabeled 1016 1016 1016
70000 GSO, payload_len 0 16 0 70016
65530 GSO, grows past MAXPLEN 10 0 65546
65540 GSO with a 24 byte hop
header, shrinks below MAXPLEN 65528 65532 65532
1000 with a 24 byte hop header 992 992 992
(0 means ipv6_payload_len() returns the real length.) On the forward
path, with a client injecting unlabeled UDP through a router to a
server, the router adds the CALIPSO option and the server delivers all
datagrams (Udp6InDatagrams 5, Ip6InTruncatedPkts 0) with this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v3.0 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit 663bed3c7b8b9a7624b0d95d300ddae034ad0614) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a) |
| Imager::File::GIF versions before 1.006 for Perl allow out-of-bounds reads when consolidating GIF images.
With `gif_consolidate => 1`, palette indices from the image are used without checking the colour table's bounds. The i_readgif_low routine reads beyond the heap allocation and copies the bytes into output pixels. The default GIF reader is not affected.
The same code ships bundled in the Imager distribution.
An attacker supplying a crafted GIF can disclose adjacent heap memory through the decoded output and may crash the process. |
| In the Linux kernel, the following vulnerability has been resolved:
smb3: fix for slab out of bounds on mount to ksmbd
With KASAN enabled, it is possible to get a slab out of bounds
during mount to ksmbd due to missing check in parse_server_interfaces()
(see below):
BUG: KASAN: slab-out-of-bounds in
parse_server_interfaces+0x14ee/0x1880 [cifs]
Read of size 4 at addr ffff8881433dba98 by task mount/9827
CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G
OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary)
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Dell Inc. Precision Tower 3620/0MWYPT,
BIOS 2.13.1 06/14/2019
Call Trace:
<TASK>
dump_stack_lvl+0x9f/0xf0
print_report+0xd1/0x670
__virt_addr_valid+0x22c/0x430
? parse_server_interfaces+0x14ee/0x1880 [cifs]
? kasan_complete_mode_report_info+0x2a/0x1f0
? parse_server_interfaces+0x14ee/0x1880 [cifs]
kasan_report+0xd6/0x110
parse_server_interfaces+0x14ee/0x1880 [cifs]
__asan_report_load_n_noabort+0x13/0x20
parse_server_interfaces+0x14ee/0x1880 [cifs]
? __pfx_parse_server_interfaces+0x10/0x10 [cifs]
? trace_hardirqs_on+0x51/0x60
SMB3_request_interfaces+0x1ad/0x3f0 [cifs]
? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs]
? SMB2_tcon+0x23c/0x15d0 [cifs]
smb3_qfs_tcon+0x173/0x2b0 [cifs]
? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
? cifs_get_tcon+0x105d/0x2120 [cifs]
? do_raw_spin_unlock+0x5d/0x200
? cifs_get_tcon+0x105d/0x2120 [cifs]
? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
cifs_mount_get_tcon+0x369/0xb90 [cifs]
? dfs_cache_find+0xe7/0x150 [cifs]
dfs_mount_share+0x985/0x2970 [cifs]
? check_path.constprop.0+0x28/0x50
? save_trace+0x54/0x370
? __pfx_dfs_mount_share+0x10/0x10 [cifs]
? __lock_acquire+0xb82/0x2ba0
? __kasan_check_write+0x18/0x20
cifs_mount+0xbc/0x9e0 [cifs]
? __pfx_cifs_mount+0x10/0x10 [cifs]
? do_raw_spin_unlock+0x5d/0x200
? cifs_setup_cifs_sb+0x29d/0x810 [cifs]
cifs_smb3_do_mount+0x263/0x1990 [cifs] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix potential 32-bit overflow when accessing ARRAY map element
If BPF array map is bigger than 4GB, element pointer calculation can
overflow because both index and elem_size are u32. Fix this everywhere
by forcing 64-bit multiplication. Extract this formula into separate
small helper and use it consistently in various places.
Speculative-preventing formula utilizing index_mask trick is left as is,
but explicit u64 casts are added in both places. |
| Immutable.js provides many Persistent Immutable data structures. Prior to versions 3.8.3, 4.3.7, and 5.1.5, Prototype Pollution is possible in immutable via the mergeDeep(), mergeDeepWith(), merge(), Map.toJS(), and Map.toObject() APIs. This issue has been patched in versions 3.8.3, 4.3.7, and 5.1.5. |
| Heap-based buffer overflow in Windows Client-Side Caching (CSC) Service allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: reset skb headers before unicast and multicast filtering
Socket filters can use SKF_NET_OFF and SKF_LL_OFF to read relative to
an skb's network and MAC headers. Netlink producers may reserve
headroom without resetting those headers, allowing a receiving socket's
filter to read data before the initialized message.
For example, IWPM HELLO replies are allocated with dev_alloc_skb(),
which reserves NET_SKB_PAD bytes. An unprivileged NETLINK_RDMA user can
attach a classic socket filter and disclose this headroom through the
length of the delivered reply. The resets in netlink_dump() do not help
because IWPM sends a separately allocated skb through netlink_unicast().
Reset both headers before running the receiver's filter in unicast and
broadcast delivery, as is already done for dump skbs. This also covers
other netlink producers that reserve headroom without changing their
allocation or message-building code. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix race in discovery auth updates
Separate configfs opens can concurrently update the discovery AuthMethod
parameter. Both callers may free the same value in
iscsi_update_param_value(), causing a double-free.
Protect the lookup and replacement with the discovery TPG access lock,
as used by the other TPG configfs parameter updates. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Fix shift-out-of-bounds for aggregated ALH capture
When ch_count is smaller than blob->alh_cfg.device_count (e.g. a mono
capture stream, such as a SmartMic, aggregated across multiple SDW
links), step = ch_count / blob->alh_cfg.device_count truncates to 0.
The subsequent GENMASK(step - 1, 0) then underflows step - 1 (u32) to
UINT_MAX, causing GENMASK()'s internal shift to use an out-of-bounds
exponent:
UBSAN: shift-out-of-bounds in sound/soc/sof/ipc4-topology.c:2363:13
shift exponent 18446744069414584384 is too large for 64-bit type 'long unsigned int'
Treat ch_count < device_count the same way as the existing "channels
equal to output reference channels" case: apply the same ch_mask to
every aggregated device instead of trying to split channels that
can't be evenly divided. |
