| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: validate firmware patch bounds
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu/buddy: bail out of try_harder when alignment cannot be honoured
The try_harder contiguous fallback could return a range whose start
offset did not match the caller's min_block_size. When a candidate's
start is misaligned, realign it: free the misaligned run and reallocate
exactly @size at the next lower min_block_size boundary. This keeps the
returned size unchanged with no surplus to trim, and rejects the request
only when no aligned candidate fits.
v2: align misaligned candidates down to min_block_size instead of
bailing out, for both the RHS and LHS paths (Matthew). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_cluster: reject template conntracks in hash match
xt_cluster_mt() treats any non-NULL nf_ct_get() result as a fully
initialized conntrack and passes it to xt_cluster_hash().
This causes a state confusion bug when the raw table CT target attaches
a template conntrack to skb->_nfct before normal conntrack processing.
Templates carry IPS_TEMPLATE status but do not have a valid tuple for
hashing yet, so xt_cluster_hash() can hit its WARN_ON() path on the
zeroed l3num field.
Reject template conntracks before hashing them. This matches existing
netfilter handling for template objects and avoids hashing incomplete
conntrack state. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_u32: reject invalid shift counts
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control()
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. In the `default` branches of both the
`ClearPortFeature` and `SetPortFeature` switch statements, it modifies
`max3421_hcd->port_status` by left shifting 1 by the request's `value`
parameter. However, it does not validate whether this shift will exceed
the width of `port_status`.
So if a malicious userspace task with access to the root hub via
/dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue`
greater than or equal to 32, the left shift operation invokes
shift-out-of-bounds undefined behavior. This results in arbitrary
bit corruption of `port_status`, including the normally-immutable
change bits, which can bypass internal state checks and confuse the
hub status.
Fix this by rejecting requests whose `value` exceeds the shift width
before performing the shift.
This issue was found using a KLEE-based symbolic execution tool for
kernel drivers that I'm currently developing. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid()
pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the
vrm_version configured by the driver, while pmbus_reg2data_vid()
already switched on it. Any driver that selects a non-VR11 VID mode
and exposes a regulator (or hwmon vout setter) sent dangerously
wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked
for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the
chip interprets as 1080 mV.
Mirror pmbus_reg2data_vid() so writes round-trip with reads. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_hfsc: Don't make class passive twice
update_vf() is called from two places for the same class during a single
dequeue when the class's child qdisc (e.g. codel/fq_codel) drops its last
packets while dequeuing:
1. The child calls qdisc_tree_reduce_backlog(), which, now that the child
is empty, invokes hfsc_qlen_notify() -> update_vf(cl, 0, 0) and turns
the class passive (cl_nactive is decremented up the hierarchy).
2. hfsc_dequeue() then calls update_vf(cl, qdisc_pkt_len(skb), cur_time)
to charge the dequeued bytes.
On the second call the class is already passive, but its child qdisc is
still empty, so update_vf() arms go_passive again:
if (cl->qdisc->q.qlen == 0 && cl->cl_flags & HFSC_FSC)
go_passive = 1;
The leaf is then skipped by the cl_nactive == 0 check inside the loop,
which does not clear go_passive, so the stale go_passive propagates to the
parent and decrements its cl_nactive a second time. A parent that still
has other active children is driven to cl_nactive == 0 and removed from
the vttree, even though those siblings are still backlogged. They are
never dequeued again and the qdisc stalls.
Fix this by only arming go_passive when the class is actually active, so an
already-passive class no longer triggers a second passive transition. The
byte accounting (cl->cl_total += len) still runs for every ancestor, so
dequeued bytes continue to be counted exactly once. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: aiu: Validate written enum values
The AIU HDMI and internal codec mux put callbacks use the written enum
value with snd_soc_enum_item_to_val() before checking whether the value is
valid for the enumeration.
Reject out-of-range values before converting the enum item, matching the
validation already done by the G12A HDMI and internal codec mux controls. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Add a max slot check for SQ
The variable WQE mode must be validated against
the maximum slots supported by HW. The max supported
value is 64K. Adding a max and min check and fail if user
supplied value is more than the max supported and zero. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: use exe_file_deny_write_access() for the interpreter clone
For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the
registered interpreter file and denies write access to the clone via
plain deny_write_access(). The clone is installed as
bprm->interpreter and later released by the exec machinery through
exe_file_allow_write_access() which skips the i_writecount increment
for files with FMODE_FSNOTIFY_HSM set.
The deny and allow side can therefore come to different conclusions
when pre-content watches are in play: if a pre-content watch is added
to the interpreter after registration every subsequent exec through
that entry takes a write denial on the clone that is never paired
with a write allowance, driving the interpreter inode's i_writecount
further down with each exec and leaving the interpreter unwritable
even after the entry and all its users are gone.
Take the write denial via exe_file_deny_write_access() so both sides
of the pairing base their decision on the same file mode, and
propagate failure instead of silently ignoring it: an interpreter
that is concurrently open for writing now fails the exec with
ETXTBSY, exactly like an interpreter freshly opened via open_exec()
would. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds
u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char,
0-255) into the kernel knode object without bounds validation. When a
packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates
`ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit
value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior
per C11 6.5.7p3, triggerable by an unprivileged user via user/network
namespaces.
UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43
shift exponent 32 is too large for 32-bit type int
Fix this by rejecting offshift >= 16 during filter creation in
u32_change(). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix netns teardown to cancel the preallocation charger
Fix the teardown of an afs network namespace to make sure it cancels the
work item that keeps the preallocated rxrpc call/conn/peer queue charged
before incoming calls are disabled (i.e. listen 0).
Also, if net->live is false because the afs netns is being deleted, make
afs_charge_preallocation() skip charging and make afs_rx_new_call() avoid
requeuing the charger.
(This was found by AI review). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: fix integer overflow in immediate data length check
imm_buf->len is a user-controlled uint32_t received from the network.
Adding it to imm_data_offset without overflow checking allows a
malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap
around to a small value, bypassing the bounds check, and subsequently
passing a ~4GB length to sg_init_one().
Use check_add_overflow() to detect wrapping before the comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable BPF_LSM_CGROUP programs at load time
The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should
not attach any sleepable BPF programs there. Add support to the verifier
to explicitly reject attempts to load sleepable BPF programs destined
for LSM cgroup attachment.
Without this, we get the following splat from a BPF_LSM_CGROUP
program marked BPF_F_SLEEPABLE attached to file_open when it calls
bpf_get_dentry_xattr():
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load
preempt_count: 0, expected: 0
RCU nest depth: 2, expected: 0
Call Trace:
down_read+0x76/0x480
ext4_xattr_get+0x11f/0x700
__vfs_getxattr+0xf0/0x150
bpf_get_dentry_xattr+0xbb/0xf0
bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85
__cgroup_bpf_run_lsm_current+0x326/0x840
bpf_trampoline_6442534646+0x62/0x14d
security_file_open+0x34/0x60
do_dentry_open+0x340/0x1260
vfs_open+0x7a/0x440
path_openat+0x1bac/0x30a0
libbpf provides a .s named section variant for every sleepable
program type except lsm_cgroup, reflecting that per-cgroup LSM programs
are intended to only run in a non-sleepable context.
The above splat was obtained by bypassing libbpf by using bpf(2)
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path
In iommu_dma_map_sg(), when handling PCI P2PDMA cases, the DMA length
of the current scatterlist segment `s` is incorrectly assigned from the
head entry `sg->length` instead of the current entry `s->length`.
This typo causes all P2PDMA segments in the scatterlist to inherit the
length of the first segment, leading to corrupted DMA lengths for multi-
segment scatterlists.
Fix this by using `s->length` instead of `sg->length`. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: reject inverted service ranges from peer bindings
tipc_update_nametbl() inserts a binding advertised by a peer node using
the lower and upper service-range bounds taken directly from the wire,
without checking that lower <= upper. The local bind path validates the
ordering (tipc_uaddr_valid()), but the name-distribution path does not.
A binding with lower > upper is inserted at the far end of the
service-range rbtree (keyed on lower) where no lookup or withdrawal can
ever match it (service_range_foreach_match() requires sr->lower <= end).
The publication, its service_range node and the augmented rbtree entry
are then leaked for the lifetime of the namespace, and there is no
per-peer cap equivalent to TIPC_MAX_PUBL on locally created bindings.
Reject inverted ranges in the network path as well. A peer node can
otherwise leak unbounded binding-table memory by sending PUBLICATION
items with lower > upper. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_connmark: reject invalid shift parameters
Revision 2 of the CONNMARK target accepts user-controlled shift
parameters and applies them to 32-bit mark values in
connmark_tg_shift().
A shift_bits value of 32 or more triggers an undefined-shift bug when
the rule is evaluated. Invalid shift_dir values are also accepted and
silently fall back to the left-shift path.
Reject invalid revision-2 shift parameters in connmark_tg_check() so
malformed rules fail at installation time, before they can reach the
packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post()
qrtr_endpoint_post() validates an incoming packet with
if (!size || len != ALIGN(size, 4) + hdrlen)
goto err;
where size comes from the wire. On 32-bit, size_t is 32 bits and
ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check
passes and skb_put_data(skb, data + hdrlen, size) writes past the
hdrlen-sized skb and oopses the kernel. 64-bit is unaffected.
This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB
Read in qrtr_endpoint_post"), which fixed only the 64-bit case.
Reject any size that cannot fit the buffer before the ALIGN. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Use overflow checks in control_update size calc
In sof_ipc3_control_update(), the expected_size calculation uses
firmware-provided cdata->num_elems in arithmetic that could overflow
on 32-bit platforms, wrapping to a small value. This would allow the
cdata->rhdr.hdr.size comparison to pass with mismatched sizes,
potentially leading to out-of-bounds access in snd_sof_update_control.
Use check_mul_overflow() and check_add_overflow() to detect and reject
overflowed size calculations. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject non-inline dinodes with i_size and zero i_clusters
On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a
non-inline regular file with non-zero i_size and zero i_clusters is
structurally malformed: the extent map declares no allocated clusters yet
the size header claims content exists. Keep rejecting that shape, but
express it through a shared predicate so the same invariant is available
to normal inode reads and online filecheck.
The same zero-cluster shape is also malformed for non-inline directories.
ocfs2 directory growth allocates backing storage before advancing i_size,
and ocfs2_dir_foreach_blk_el() later walks until ctx->pos reaches
i_size_read(inode). A forged directory dinode with a huge i_size and no
clusters would repeatedly fail on holes while advancing through the
claimed size.
Sparse regular files remain exempt: on sparse-alloc volumes, truncate can
legitimately grow i_size without allocating clusters. System inodes and
inline-data dinodes also retain their separate storage rules.
Mirror the check in ocfs2_filecheck_validate_inode_block() as well.
filecheck reports through its own error namespace, so malformed
size/cluster state is logged as a filecheck invalid-inode result rather
than via ocfs2_error(), but it must not proceed into
ocfs2_populate_inode(). |
