| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The LCD KVM over IP Switch CL5708IM has a Heap-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to perform a denial-of-service attack. |
| A vulnerability in the command-line interface of EdgeConnect SD-WAN could allow an authenticated attacker to read arbitrary files within the system. Successful exploitation could allow an attacker to read sensitive data from the underlying file system. |
| A vulnerability affecting HPE Networking Instant On Access Points has been identified where a device processing a specially crafted packet could enter a non-responsive state, in some cases requiring a hard reset to re-establish services. A malicious actor could leverage this vulnerability to conduct a Denial-of-Service attack on a target network. |
| When using the Grafana Snowflake Datasource Plugin,
if Oauth passthrough is enabled on the datasource, and multiple users are using the same datasource at the same time on a single Grafana instance, it could result in
the wrong user identifier being used, and information for which the viewer is not authorized being returned.
This issue affects Grafana Snowflake Datasource Plugin: from 1.5.0 before 1.14.1. |
| The LCD KVM over IP Switch CL5708IM has a Stack-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device. |
| A potential missing authentication vulnerability was reported in some Lenovo Tablets that could allow an unauthorized user with physical access to modify Control Center settings if the device is locked when the "Allow Control Center access when locked" option is disabled. |
| Various software builds for the AT&T Calypso, Nokia C100, Nokia C200, and BLU View 3 devices leak the device IMEI to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: AT&T Calypso (ATT/U318AA/U318AA:10/QP1A.190711.020/1632369780:user/release-keys); Nokia C100 (Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_190:user/release-keys and Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_270:user/release-keys); Nokia C200 (Nokia/Drake_02US/DRK:12/SP1A.210812.016/02US_1_080:user/release-keys); and BLU View 3 (BLU/B140DL/B140DL:11/RP1A.200720.011/1628014629:user/release-keys, BLU/B140DL/B140DL:11/RP1A.200720.011/1632535579:user/release-keys, BLU/B140DL/B140DL:11/RP1A.200720.011/1637325978:user/release-keys, BLU/B140DL/B140DL:11/RP1A.200720.011/1650073052:user/release-keys, BLU/B140DL/B140DL:11/RP1A.200720.011/1657087912:user/release-keys, BLU/B140DL/B140DL:11/RP1A.200720.011/1666316280:user/release-keys, and BLU/B140DL/B140DL:11/RP1A.200720.011/1672371162:user/release-keys). This malicious app reads from the "persist.sys.imei1" system property to indirectly obtain the device IMEI. |
| The VerticalResponse Newsletter Widget plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'verticalresponse' shortcode in all versions up to, and including, 1.6 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A high privileged remote attacker can influence the parameters passed to the openssl command due to improper neutralization of special elements when adding a password protected self-signed certificate. |
| The wsc server uses a hard-coded certificate to check the authenticity of SOAP messages. An unauthenticated remote attacker can extract private keys from the Software of the affected devices. |
| An unauthenticated remote attacker can crash the wscserver by sending incomplete SOAP requests. The wscserver process will not be restarted by a watchdog and a device reboot is necessary to make it work again. |
| A local low privileged attacker can bypass the authentication of the Device Manager user interface, allowing them to perform privileged operations and gain administrator access. |
| A vulnerability was found in songquanpeng one-api up to 0.6.10. It has been classified as problematic. This affects an unknown part of the component System Setting Handler. The manipulation of the argument Homepage Content/About System/Footer leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| A certain software build for the Orbic Maui device (Orbic/RC545L/RC545L:10/ORB545L_V1.4.2_BVZPP/230106:user/release-keys) leaks the IMEI and the ICCID to system properties that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in this instance they are leaked by a high-privilege process and can be obtained indirectly. This malicious app reads from the "persist.sys.verizon_test_plan_imei" system property to indirectly obtain the IMEI and reads the "persist.sys.verizon_test_plan_iccid" system property to obtain the ICCID. |
| A vulnerability was detected in pmTicket Project-Management-Software up to 2ef379da2075f4761a2c9029cf91d073474e7486. The affected element is the function loadLanguage of the file classes/class.database.php of the component Cookie Handler. Performing manipulation of the argument user_id results in deserialization. The attack can be initiated remotely. The exploit is now public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in GL.iNet GL-A1300 Slate Plus, GL-AR300M16 Shadow, GL-AR300M Shadow, GL-AR750 Creta, GL-AR750S-EXT Slate, GL-AX1800 Flint, GL-AXT1800 Slate AX, GL-B1300 Convexa-B, GL-B3000 Marble, GL-BE3600 Slate 7, GL-E750, GL-E750V2 Mudi, GL-MT300N-V2 Mango, GL-MT1300 Beryl, GL-MT2500 Brume 2, GL-MT3000 Beryl AX, GL-MT6000 Flint 2, GL-SFT1200 Opal, GL-X300B Collie, GL-X750 Spitz, GL-X3000 Spitz AX, GL-XE300 Puli and GL-XE3000 Puli AX 4.x. It has been declared as problematic. This vulnerability affects unknown code of the component API. The manipulation leads to inefficient regular expression complexity. It is recommended to upgrade the affected component. |
| The MOD3 command traffic between the monitoring application and the
inverter is transmitted in plaintext without encryption or obfuscation.
This vulnerability may allow an attacker with access to a local network
to intercept, manipulate, replay, or forge critical data, including
read/write operations for voltage, current, and power configuration,
operational status, alarms, telemetry, system reset, or inverter control
commands, potentially disrupting power generation or reconfiguring
inverter settings. |
| In the Linux kernel, the following vulnerability has been resolved:
backlight: led-bl: Add devlink to supplier LEDs
LED Backlight is a consumer of one or multiple LED class devices, but
devlink is currently unable to create correct supplier-producer links when
the supplier is a class device. It creates instead a link where the
supplier is the parent of the expected device.
One consequence is that removal order is not correctly enforced.
Issues happen for example with the following sections in a device tree
overlay:
// An LED driver chip
pca9632@62 {
compatible = "nxp,pca9632";
reg = <0x62>;
// ...
addon_led_pwm: led-pwm@3 {
reg = <3>;
label = "addon:led:pwm";
};
};
backlight-addon {
compatible = "led-backlight";
leds = <&addon_led_pwm>;
brightness-levels = <255>;
default-brightness-level = <255>;
};
In this example, the devlink should be created between the backlight-addon
(consumer) and the pca9632@62 (supplier). Instead it is created between the
backlight-addon (consumer) and the parent of the pca9632@62, which is
typically the I2C bus adapter.
On removal of the above overlay, the LED driver can be removed before the
backlight device, resulting in:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
Call trace:
led_put+0xe0/0x140
devm_led_release+0x6c/0x98
Another way to reproduce the bug without any device tree overlays is
unbinding the LED class device (pca9632@62) before unbinding the consumer
(backlight-addon):
echo 11-0062 >/sys/bus/i2c/drivers/leds-pca963x/unbind
echo ...backlight-dock >/sys/bus/platform/drivers/led-backlight/unbind
Fix by adding a devlink between the consuming led-backlight device and the
supplying LED device, as other drivers and subsystems do as well. |
| Cognex In-Sight Explorer and In-Sight Camera Firmware expose
a proprietary protocol on TCP port 1069 to perform management operations
such as modifying system properties. The user management functionality
handles sensitive data such as registered usernames and passwords over
an unencrypted channel, allowing an adjacent attacker to intercept valid
credentials to gain access to the device. |
| The OTP-less one tap Sign in plugin for WordPress is vulnerable to privilege escalation via account takeover in versions 2.0.14 to 2.0.59. This is due to the plugin not properly validating a user's identity prior to updating their details, like email. This makes it possible for unauthenticated attackers to change arbitrary users' email addresses, including administrators, and leverage that to reset the user's password and gain access to their account.
Additionally, the plugin returns authentication cookies in the response, which can be used to access the account directly. |
